Renovation And Modernization Of Office And Principal Room At Govt. Victoria College Palakkad

Amount

CIVIL WORKS

15.23.1 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

15.39.2 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 10mm upto 25 mm

15.39.3 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking with in 50 metres lead:Thickness above 25 mm upto 40 mm

14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge

15.7.4 Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.12.1 Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

50.6.1.5 Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

13.1.1 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

14.43 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.60.1 Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

11.41.2 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm

11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

11.36 Providing and fixing I st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer -in?Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

12.45.1 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum plain board conforming to IS : 2095-Part 1

OD39566/2024-2025 Supplying and fixing full height wooden Paneling a combination of 16mm and 8 mm BWR/BWP plywood and all exposed portions of the plywood shall be finished with 1 mm thick Laminate of approved make and shade. Including all materials and labour charges etc.

OD39567/2024-2025 Supplying and fixing full height wooden partition by covering with 8mm BWR/BWP plywood on either side of 16mm Plywood frame work and all exposed portions of the plywood shall be finished with 1 mm thick Laminate of approved make and shade. Rate including all materials and labour charges etc

OD39570/2024-2025 Supplying and fixing Glass partition with 6mm plain glass by covering with 8mm BWR/BWP plywood on either side of 16mm Plywood frame work and all exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. Rate including all materials and labour charges etc.(on the top portion of wooden partition)

OD39575/2024-2025 Providing and fixing Flush Door frame with 30mm thick shutter in position overlaid with 1mm laminate including vision panel, Tower bolt hinges etc Rate quoted shall include all material, labour charges, cost of conveyance etc

9.83 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

OD39585/2024-2025 Supplying and fixing decorative washable wallpaper including all material and labour charge etc

OD39586/2024-2025 Providing and fixing all window in position Roller Blinds, including all standard fitments and fabric. Rate quoted shall include all material, labour charges, cost of conveyance etc.

OD39587/2024-2025 Supplying and fixing Medium size framed art prints on walls including all materials and labour charges etc

OD41928/2024-2025 Supplying and fixing Small size framed art prints on walls including all materials and labour charges etc

OD39613/2024-2025 Supplying indoor plants including PU Pots and all materials and labour charges etc

OD39615/2024-2025 Supplying and fixing 150mm height letter, 6mm thick acrylic sheet & 1mm thick brass sheet of College Logo including all materials and labour charges etc

OD39616/2024-2025 Supplying and fixing Privacy film including all materials and labour charges etc

OD39637/2024-2025 Providing and fixing in place table made of a combination of BWR grade 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc

OD39638/2024-2025 Providing and fixing in place Side Return Table made of a combination of BWR grade 16 mm plywood of approved quality and make; All exposed portions of the plywood shall be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table shall be finished with 0.8mm laminate. The rate shall include all other necessary hardware materials and labour charges etc

OD39692/2024-2025 Supplying and fixing Dining table of size 900 mm (l) x 900 mm (w) x 750 mm (h) to be formed out of 18 mm thick scratch resistant and deflection resistant Pre-laminatedparticle board. All exposed edges lipped with PVC edge banding with supporting leg of epoxy coated GI pipe. The rates including all materials and labour charges etc

OD39693/2024-2025 Supplying Executive High Back net chair with hydraulic lifting mechanism and tilt lock, shodded on metal star legs with castors

OD39694/2024-2025 Supplying Medium back chair with S type metal legs for Visitors

OD39695/2024-2025 Supplying Executive medium back net chair with hydraulic lifting mechanism and tilt lock, shodded on metal star legs with castors

OD39696/2024-2025 Supplying Dining chair with metal legs

OD39697/2024-2025 Supplying 3 seater stainless steel (SS) Airport chair including all cost of delivery at site.

OD39698/2024-2025 Applying 2 coat of polyurethane liquid polish for existing doors including all materials and labour charges etc.

OD39709/2024-2025 Supplying indoor small plants including PU pots and all materials and labour charges etc

OD39707/2024-2025 Providing and fixing Medium Height storage shall be formed out of 18 mm thick BWR Plywood with 1mm laminate and all exposed edges lipped with PVC edge banding. Inside portion of the storage shall be covered with0.8mm laminate .Rates

OD40120/2024-2025 Providing and fixing Wood Plastic Composit (WPC) Fluted Paneling with12mm moisture/Water resistant/ anti termite panels with necessary grid on the wall and ceiling . Rate shall include all material, labour charges, cost of conveyance, etc.

OD40124/2024-2025 Supplying and fixing modern powder metal rafter with wooden planter boxes . Rate shall include all material, labour charges, cost of conveyance, etc.

OD40098/2024-2025 Linear Workstations : Size 1000 L x 600 W X 750 H mm, Table top 16 mm thick plywood finished with 1mm thick Laminate of approved make and shade edge finish with 2 mm PVC edge band. Under structure : Necessary wire managent so that switches to be mounted on wire tray below work top and acccesed using soft closing access flap, Accessories (excluding switch and socket) , Leg : MS powder coated leg and MS powder coated edge beams. Front separation above the table top, 300mm height acrylic screen partition on<br>table top with neccessary partition holder at the base

OD40099/2024-2025 Supplying and fixing Conference table of size 4300 mm (l) x 2000 mm (w) x 750 mm (h) to be formed out of 18 mm thick scratch resistant and deflection resistant Prelaminated particle board. All exposed edges lipped with PVC edge banding with provision for wire manager. The rates including all materials and labour charges etc

OD40100/2024-2025 Supplying sofa 3 Seater including all materials and labour charge etc.

OD40102/2024-2025 Supplying sofa 1 Seater including all materials and labour charge etc.(DC Room)

OD40103/2024-2025 Providing and fixing in place Centre Table of size 900 mm x 450 mm x 450 mm The rate will include all other necessary hardware, materials and labour charges etc.

OD40104/2024-2025 Providing and fixing in place Executive Table of size 3000 mm x 1200 mm x 800 mm made of a combination of BWR grade 6 mm, 12 mm and 18 mm plywood of approved quality and make; All exposed EXTERIOR portions of the plywood will be finished with 1mm thick Laminate of approved make and shade. The inside portion of the table will be finished with 0.8mm laminate. The rate will include all other necessary hardware, materials and labour charges etc.(Principal)

PLUMBING AND SANITARY FITTINGS WORKS

17.81 Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and

17.1.1 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litter low level white P.V.C.flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever require:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

50.17.1.4 Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge.

17.7.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630 x 450 mm with a single 15 mm C.P. brass pillar tap

18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS: 893115 mm nominal bore

9.123 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.

9.124.1 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75 mm x 30 mm having wall thickness 5 mm. The styles, top & bottom rails shall have one side wall thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with M.S. tubes of size 33 mm x 17 mm x 1 mm, painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (Push fit type) will be set inside the styles and the rails with a cavity, to receive single piece extruded 5 mm PVC sheet as panel. The styles and rails will be mitred cut and joint with the help of PVC solvent cement & self driven self tapping screws. Single piece extruded solid PVC lock rails of sixe 100mm x 30 mm with wall thickness 5 mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100 mm x 8 mm complete as per manufacturer's specifications and direction of Engineer -in-charge.Non decorative finish

18.51.1 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

50.18.8.2.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 20 mm pipe 10 Kgf/ cm2

50.18.9.16.2 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6Kgf/cm2 - External work - Exposed on wall

50.18.9.9.1 Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of Joints complete as per direction of engineer in charge.110 mm dia 6Kgf/cm2

ELECTRICAL WORKS

1.10.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.Group C

90.11.1.14 Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required4 way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43)

2.3.3 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCBIRCCB/Isolator12 way, Double door

2.12.1 Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.13.1 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2 Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.15.2 Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.10.1 Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole

1.12 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

1.14.2 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface / recessed medium class PVC conduit as required2X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

1.7.1 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

90.6.10.1 Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.6.10.2 Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm

1.17.20 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm

1.17.12 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 2.5 sq. mm

1.17.3 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.6 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.6 x 1.5 sq. mm

1.24.1 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 amps switch

1.24.4 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.3 pin 5/6 amp socket outlet

1.24.3 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

90.2.1.7 Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point

1.27.2 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.5 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.8 Module (125mmX125mm)

1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

OD40763/2024-2025 Supply, conveyance installation testing and commissioning of pre-wired square type 18w LED fitting (250x250mm panel light) complete with all accessories and drives etc. Lumen out put not less than 1800 efficiency not less than 100lumen/watt duly fixed on false ceiling and giving connection etc. as required. (for fitting in false ceiling) make Philips/Crompton/Bajaj/Wipro or equivalent make.

OD40764/2024-2025 Supply and fixing LED strip light in the existing ceiling and giving necessary connection etc. complete including all charges.

OD40826/2024-2025 Supply and fixing 3w Punch lamp (Lucker) including all cost of materials and labour charges etc.

OD40827/2024-2025 Supply and fixing Pendant lamp including all materials and labour charges etc. Net Total 6.000each @3674.76/each 22048.56

90.4.5.4 Supply, Installation, testing and commissioning of ceiling fan of following sizes including wiring the down rods of standard length (up to 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required. 1200mm sweep - ceiling fan complete with service value minimum 4.0(cub meter/minute/Watt), Air delivery minimum 210(cubic meter/minute), Copper winding suitable for 230V/240V single phase AC supply

1.44 Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

OD41835/2024-2025 Supply and fixing LED Drive 16A including giving all connection etc. complete including all labour charges.

OD40920/2024-2025 Supply and fixing 20mm PVC flexible conduit with wire tie including all charges

OD41858/2024-2025 Supply, conveyance, installation, testing and commissioning of exhaust fans of size up to 300/305mmsweep Light Duty Exhaust fan in metal frame working on 230V A/C in the existing opening, fixing necessary anchor bolt/bolt and nuts etc as required including giving connection with the supplied wire along with the exhaust fan.

NETWORKING

OD41006/2024-2025 Supplying and fixing Switch 16 Port 10/100 2 Port Giga Poe Rackmount including all materials and labour charges etc.

OD41011/2024-2025 Supplying and fixing Switch 48 Port Giga Unmanaged including all materials and labour charges etc.

OD41013/2024-2025 Supplying and fixing CEILING MOUNT ACCESS POINT WIRELESS N300 2.4ghz including all materials and labour charges etc.

OD41018/2024-2025 Supplying and fixing Floor Rack 9U including all materials and labour charges etc.

OD41023/2024-2025 Supplying and fixing Power Distribution Unit 10 Socket 6a/13a Pdu (Support 27u Rack Onwards) including all materials and labour charges etc.

OD41027/2024-2025 Supplying and fixing Fan Four All Rack Support including all materials and labour charges etc.

OD41029/2024-2025 Supplying and fixing Patch Panel 24 Port Unloaded including all materials and labour charges etc.

OD41045/2024-2025 Supplying and fixing Rj45 Connector Cat6 100n Box including all materials and labour charges etc.

OD41047/2024-2025 Supplying and fixing Cantilever Tray

OD41049/2024-2025 Supplying and fixing Cable Manager 1u including all materials and labour charges

OD41056/2024-2025 Supply and fixing of standard graded CAT 6 information Outlet (I/O) box in recess/surface with single port and Rj face plate having following minimum specifications :86 type standard, front access with spring shutter, easy identification labels or Rj 45 port etc. and Metal box concealed and giving connection properly with the incoming CAT 6 UTP cable, testing the connection, making good the damages, colour washing etc.

OD41095/2024-2025 Supplying and fixing Patch Cord Cat6 1m including all materials and labour charges etc.

OD41097/2024-2025 Supplying and fixing Patch Cord Cat6 2m including all materials and labour charges etc.

OD41099/2024-2025 Supplying and fixing Network Cable Cat 6 including all materials and labour charges etc.

DAILY LABOUR - FURNITURE SHIFTING

OD41747/2024-2025 Daily labour engaged Coolie for shifting furniture from First Floor EDUSATE room to Ground Floor proposed online recording room including all cost of labour charges etc.

OD41748/2024-2025 Daily labour engaged Carpenter for shifting furniture from First Floor EDUSATE room to Ground Floor proposed online recording room including all cost of labour charges etc.

DAILY LABOUR- PROJECTOR/AUDIO SYSTEM SHIFTING

OD41752/2024-2025 Daily labour engaged for shifting Projector, audio system from First Floor EDUSATE room to Ground Floor proposed online recording room including all cost of labour charges etc. - Technician

OD41753/2024-2025 Daily labour engaged for shifting Projector, audio system from First Floor EDUSATE room to Ground Floor proposed online recording room including all cost of labour charges etc. - Software Engineer

OD41754/2024-2025 Daily labour engaged for shifting Projector, audio system from First Floor EDUSATE room to Ground Floor proposed online recording room including all cost of labour charges etc. - Engineer

OD41756/2024-2025 Dismantling the existing damaged wiring points such as light points, fan point, plug points, DBs etc. and hand over to the concerned authorities.

vipin (BID ID -2058984)

Bidder Name

Sabarmathy Associates

vipin