PERIODICAL SERVICES TO CERTAIN SHEDS AND BLDGS AT CQA (SV), ALKAPURI AND EME WKSP AREA UNDER AGE B/R (EAST) AT GE DEHU ROAD

Amount

Taking down cement or cement lime plaster, any description, on brick or concrete surfaces, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L for Rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces including finished even and fair., finished fair and even complete.

M & L for Rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces incl admixture of WPC by wt of cement. (WPC to be measured and paid separately) including finished even and fair., finished fair and even complete. finished fair and even complete.

M & L for Preparation of new surfaces of walls and applying two coats of oil bound distemper in approved colour/ shade over a coat of chalk whiting primer after preparation of surfaces complete.

M&L for prepartion of newly plastered surface of wall applying two coats on weatherproof acrylic emulsion exteroir grade paint on external surfaces including a coat of alkali resistant priming paint complete all as specified.

M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coat of white wash complete all as specified.

M & L for Preparing old decorated plastered or unplastered surfaces of ceiling including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified.

M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper complete all as specified.

M & L for Preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying two coats of oil bound distemper complete all as specified.

M & L for Complete removal of existing treatment of surface finish on wall (any number of layers) by scrapping with steel scrappers or any other means, including filling depressions of scrapped with wall care putty (3 mm thick) and applying one coat of primer with two coat of oil bound distemper complete all as specified.MAKE JK/BIRLA.

M & L for Preparing old painted steel & iron surfaces of any description over 10 cm in width or girth ,including roof and applying one coat of tint approved by Engr-in-charge synthetic enamel paint complete all as specified.

M & L for Preparing old painted surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint of tint approved by Engr-in-charge complete all as specified.

Material and labour for complete removal of existing treatment of plastered OR unplastered old decorated surface walls by brooming down and applying two coats of weather proof paint on external surfaces including a coat of acrylic based primer at any height of building / tower complete all as specified and as directed by Engineer-in-Charge.

Labour only for Removing wild vegitation, moss, small shrubs and rubbish material on chajjas, roofs, walls at any position and at any situation in GF roof or in 2nd floor roof, Ist floor ,papapets complete all as directed by Engineer-in-Charge.

Material and labour for writing letter or figures (Block, Roman,Italic or Indian ) in white or colour synthetic enamel paint (height of letters 10 cm) over black base (dia of circle 23 cm) paint on existing walls / steel surfaces complete all as specified and directed.

Supply only WPC

M&L for one coat of synthetic enamel paint including preparation of old painted surfaces Eaves gutter and pipes of any description n exc 60 cm girth including holderbats.distance pieces,etc., complete all as specified.

M & L for complete removal of existing treatrment and applying two coats of lustor paint as on walls over a coat of priming paint and wall care putty over complete surfaces, complete all as specified.

M & L for complete removal of existing treatrment and applying two coats of Plastic emulsion paint as on walls over a coat of priming paint and 3 mm wall care putty over complete surfaces, complete all as specified.

M & L for Preparation of old plastered surfaces of walls including washing, rubbing down and stopping of distempered surfaces applying one coat of Cement base paint, complete all as specified.

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M &L for single component polymer modified repair mortar with compressive strength minimum 38 MPA at 28 days (ASTM C 109:99) and tensile strength minimum 2.5 Mpa (ASTM C 307) up to 15mm in a single coat @ 34 kg per sqm for 15mm thickness as per manufacturer instructions complete all as directed.

M&L for waterproof cement based putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1 mm over the plastered/old painted wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 240 Grit or above to make the surface free from dust etc. by skilled labour as per following steps:- Step 1) Mix the putty powder by adding water as per manufacturer instructions and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2) Apply the first coat the prepared mixer with the help of fully automatic airless spray machine of putty application having flow speed of max 6 ltrs per minutes with a maximum pressure 3300 PSI Step 3) Allow 6-8 hrs time to dry the putty surface.

M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for two coats of smooth interior acrylic emulsion with rich matt finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for two coat water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.

M&L for two coats of smooth interior acrylic emulsion with Texture finish having VOC less than 50 grams per ltr complying LEEDS criteria @1 ltrs(unndiluted) /10 sq mtrs diluted with water in 2:1 ratio applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint as per manufacturer instructions complete all as directed

M/S Sharvi Construction

AVS CONSTRUCTION

DINESH CONSTRUTION

Shri Sant Cosntruction

M/S OMKAR DEEPAK DHAVAN