Special repair renovation of stable bathrrom in MNSS Rai in sonipat distt.

Amount

Carriage or material (mettaled roads),Lead more than 0.48 km. excludingLoading, unloading and stacking (a)Stone (building or pitching),sand, bajri, shingle, spalls, bricks-bats, brick ballast and stone metal (HSR.5.2+4.1 (a) ).

Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing In cement (HSR 8.5 b)

Dismantling concrete reinforced cement concrete with cleaning and straghtening and cutting of bars if required. (HSR 8.6 e)

Dismantling Flooring and Ceiling cement conglomerate/terrazzo floors 25 mm to 50 mm Thick including concrete base (HSR. 8.25).

Dismantling cement eonglomerate/terrazzo floor 25 mm to 50 mm thick Without concrete base. (HSR. 8.26).

Scraping of cement plaster. (HSR 8.32 C)

Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth..(HSR 10.26)

Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)

Cement concrete 1:2:4 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects.(a)extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 (HSR 10.82+10.95)

First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR 11.9)

Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.. (HSR 13.13)

Providing fixing P.V.C Rai water pipe 6kg Pressure of ISI mark in cement mortar during masonry work (HSR 13.89) (a) 100mm dia PVC Pipe

Fe-500 EQR TMT steel bar for RCC work, where not included in the complete rate of RCC including bending, binding and placing in the position complete. (HSR 18.22)

CUTTING HOLES UPTO 23 CM SQUARE THROUGH STONE MASONARY OR BRICK WORK IN CEMENT WALLS FOR PIPES AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND FINISHING according to existing finish where required. (HSR 28.24) (a) 11.43 cm thickness of wall

b) 22.86 cm thickness of wall

CUTTING HOLES UPTO 23 CM SQUARE FOR PIPE IN FLOORING AND ROOFS OF CEMENT CONCRETE REINFORCED CONCRETE OR REINFORCED BRICK WORK AND MAKING GOOD INCLUDING REPOINTING REPLASTERING AND COLOUR OR WHITE WASHING WHERE REQUIRED (HSR 28.26) (b) 115mm thicknessof floor or roof

PROVIDING AND FIXING IN POSITON BEST INDIAN MAKE CHROMIUM PLATED BRASS 2ND TRAP FOR LAVATORY SUITE. (HSR 30.45)

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR.30.68) ( e) C.P. Brass towel Ring

Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (HSR 30.70 a i) Soap dish 160 mm

PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE BEVELLED EDGE 5.5 MM THICK MIRRON Mounted on ASBESTOS sheet GROUND FIXED IN POSITION BY MEANS OF 4 NOS. CHORMIUM PLATED BRASS SCREWS AND WASHERS over rubber washers and rawl plug embedded in the wall or chromium plated brass clamps with C.P brass screws (as required by the Engineer-in-charge) COMPLETE INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR. 30.71 b ii) 530mmx430mm Single colour.

PROVIDING AND FIXING IN POSITION H.C.I SOIL WASTE VENT OR ANTISYPHONAGE PIPES TO I.S.I SPECIFICATION OF E.L.C. MANUFACTURE OR OF ANY OTHER REPUTED FIRM INCLUDING CUTTING AND WASTAGE ETC AND CUTTING HOLES IN WALLS, ROOFS OR FLOOR ETC ANDMAKING GOOD to its original condition BUT EXCLUDING COST OF LEAD JOINTING. (HSR 30.84) (A) (a) 100mm i/d

PROVIDING LEAD CAULKED JOINTS TO H.C.I PIPES SPECIALS CONFORMING TO I.S.I SPECIFICATIONS OF E.L.C MANUFACTURE OR ANY OTHER REPUTED FIRM INCLUDING COST OF LEAD YARN, FUEL AND TOOLS, ETC. (HSR 30.87) (a) 100 mm dia

Providing and fixing C.P.V.C. pipe including all specials (N.S). (B) 3/4'' C.P.V.C. Pipe (NS).

(C) 1'' C.P.V.C. Pipe (NS).

Providing and fixing G.I. Union.(N.S.) (a) ½”

Providing & fixing P.V.C. waste pipe. (N.S.)

Providing & fixing P.V.C. cistern. Hindware or Jaquar. (N.S.)

Supply of Granite.(N.S.)

Providing & fixing Jet spray with seat cover (N.S.)

Providing & fixing two in one C.P. Brass bib cock.(N.S.)

The Sayara Coop L and C Society Ltd

The Khan Coop. L C Society Ltd.