GE/SMB/T-74/2024-25 SPECIAL REPAIRS TO BLDG NO T30 AND T31 OR CK HOUSE AND DINING HALL AND PROVN OF HYBRID SECURITY WALL APPROX 63 FT GAP AT MILITARY STATION SAMBA

Amount

Demolition of brick work or stone masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L brick work with sub class ‘B’ brick straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per srl item No 02 above but except bricks.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement, complete all as specified and directed.

M&L rendering 10 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces rendering to be finished even and smooth without using extra cement completle all as specified and directed

M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying base of putty for smoothening of surfaces etc complete all as specified and directed.

M&L Complete removal of existing treatment of old plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer including applying base of putty for smoothening of surfaces etc complete all as specified and directed.

M&L Applying two coats of cement base paint including prepration of new plastered surfaces of wall complete all as specified and directed.

M&L Complete removal of existing treatment on walls and Applying two coats of cement base paint on old plastered/unplastered surfaces of wall complete all as specified and directed.

Dismantling Asbestos cement (corrugated,semicorrugated, etc.) sheets in roof coverings, complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantling 40 sqcm and over in section in any position in framed work, complete all as specified and directed.

S&F Roof trusses (framed), trussed, purlines, rafters, crane gantries, rails and fastenings and heavy bracket framing(Beam, tee, angle, channel, hollow section square/rectangular or flat sections) including distance pieces, cleats, MS Plate, welding, bolts etc, complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets, complete all as specified and directed.

S&F Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre 6 mm thick for fixing in 600mm x 600mm grid including Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed.

M&L non skid coloured ceramic tiles 7 to 8mm thick(square/rectangular joint free) area of each tiles exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed or bedding layer of mortor 15mm thick in CM 1:6, complete all as specified & directed.

M&L Glazed coloured ceramic tiles joint free in vertical surfaces of size 300 x 450 mm x 7mm thick set & jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:3 on brick /concrete surfaces complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors,aprons etc laid bedded and pointed in any mortar, complete all as specified and directed.

Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishes, complete all as specified and directed.

M&L Rubbing grinding and polishing the existing kota stone flooring and skirting complete all as specified and directed .

M&L Black Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including rubbing and polishing complete including Screed bed (1:4) or bedding layer of mortar 20 mm thick for laying floor finishes, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm not exceeding 4 square metre each, including cutting holes for taking out hold fasts of dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt), complete all as specified and directed.

Material & labour factory made steel windows double shutter box type, outer frame made out of ERW TUBE 'P' section (60x45x25mm) and shutters of ERW TUBE 'P' section (50x35x20mm) operable shutters side hung includding pistol hinges with two Nos of MS Tower bolts 150mm size on each shutter steel handle and stopper of 'Z' section with 10mm squar guard bars devetailed or welded ready for glass fixing and wire gauzed fixing with suitabel fittings/openning for cooler/AC where required .Steel windows will be double shutter external glazed and internal wire gauzed complete all as specifed and as per Drg No CEPZ/TD-354/07 1/3 to 3/3 complete all as specified and directed.

S&F Pressed steel frames 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

S&F Pressed steel frames 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Factory made 35mm thick, IInd class H.W rail and style Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples ,complete all as specified and directed.

S&F Sheet glass, ordinary quality 3.00 mm thk and glazing with oil putty in square not exceeding 0.5 sq m in each pane complete all as specified and directed.

All as per item no 34 but fixing as in repair incl hacking out old glassess from metal frame, complete all as specified and directed.

S&F Aluminium alloy, anodised sliding door bolts(300mm long) with hasp,staples( bolt type) and fixing clip of sheet,cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed complete all as specified and directed.

S&F Aluminium handle 150 mm long cast type anodised, complete all as specified and directed.

S&F Aluminium tower bolt (200 mm long), anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F M.S. rat tail helical door spring (150 mm long) including roller and roller plate complete all as specified and directed.

Taking down door shutters of any description exceeding 1 sqm and not exceeding 2 sqm each and refixing the same after easing and adjusting/resizing complete all as specified and directed.

Taking down GI pipe 15mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking down GI pipe 20mm bore steel tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F G.I. pipe 15mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified and directed.

S&F G.I. pipe 20mm bore tubing medium grade galvanised with all fitting fixed to wall, ceiling and laid in floors complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L Providing, cement concrete1:2:4 Type B-1(using (20 mm graded ggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new or previously untreated surface of steel or iron surfaces of any description over 10cm width or grith and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel or iron surfaces of any description over 10cm width or grith and applying one coats of synthetic enamel paint complete all as specified and directed.

S&F in Repair Vitreous china WHB size 550x400mm including cutting or pinning in ends of brackets or erecting stands incl 32mm dia waste pipe,waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and flynuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair C.P. Bib taps(Fancy type) 15mm bore cast copper alloy with crutch or butter fly handle,screwed down,screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair C.P. Angle valve/stop valve (fancy type) 15mm bore,cast copper alloy screwed down,high pressure,screwed both ends for iron pipe or unions complete all as specified and directed.

S&F in repair C.P. pillar tap( fancy type 15mm bore)cast copper alloy with capsten head screwed down high pressure with or without letter 'Hot' or 'Cold' with long screw shank and flt nuts screwed for iron pipe complete all as specified and directed

S&F in repairs tubular towel rail,brass chromium plated, 60cm long between flanges complete all as specified and directed

S&F in repair PVC connection 15mm size, 450mm long with PTMT nut complete all as specified and directed

S&F in repair 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing only in repairs of High or low level fluslhing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any, complete all as specified and directed.

S & F in repair vitreous China squatting pan, ‘Orissa pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and directed.

S&F in repair Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, waste coupling,washers waste pipe, cast iron cantilever brackets ,connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.

M&L Excavation in trenches, n exc 1.5 wide and n exc 1.5m in depth: for foundation ,etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any kind of soil, complete all as specified and directed.

M&L Excavation in trenches, n exc 1.5 wide and n exc 1.5m in depth: for foundation ,etc or for shafts, wells, cesspits, manholes, pier holes, etc n exc 10 sqm on plan and exc 1.5 m in depth and getting out in any kind of soil, complete all as specified and directed.

M&L Surface excavation n exc ( not exceeding) 30cm deep and averaging 15 cm deep and getting out in any kind of soil, complete all as specified and directed.

M&L Cement concreteType C2 1:3:6(40 mm graded aggregate) in foundations,filling and massconcrete, complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns , raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Reinforced cement concrete (design mix)M-25 (20 mm graded aggregate)Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed.

Reinforced cement concrete (design mix)M-25 (20 mm graded aggregate) Columns, pillars, piers,posts and struts, complete all as specified and directed.

Formwork to edges of concrete flats,break in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work all exceeding 20 cm wide, complete all as specified and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc, complete all as specified and directed.

Reinforced cement concrete (design mix)M-25 (20 mm graded aggregate) Beams, cantilevers,bressummers, lintels over 1.5m span, complete all as specified and directed.

Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius Old size bricks in cement mortar 1:4, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:4, complete all as specified and directed.

Rendering 5mm thick on fair faces of brick work or concrete surfaces in Cement plaster 1:4, complete all as specified and directed.

M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) including necessary prepration of new plastered wall surfaces, complete all as specified and directed.

S&F fence post of CHS OD 76x3.2 mm thick length 1305mm with weld mesh panel height 955 mm,panel width 3200.4 mm, mesh size -76.2x12.7 mm,dia of wire-4mm, 2 Nos 'V' bends.Extension arms made out of equal angle- 50x50x5 th.Concentrina coil dia-1050mm, blade profile- MBBT, strip-0.5 mm th, core wire dia- 2.5 mm and heavy galvanized. 06 no rows of high tensile barbed wire dia- 3.15mm, barbed wire dia -2.00mm, doble strand barbed wire, barb at every 100 mm C/C distance. Weld mesh is fixed with fence posts with Omega clamps with profile cover plate with nuts and bolts SS-304. All posts , clamps & extension arm are hot dip galvanized.All weld mesh panels are PPC in green colour complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, light & power socket) complete with fittings and fixtures such as switches,ceiling rose ,pendents ,regulators,socket,lampholders brackets,bulk head fitting,tube lights etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and also making good distrubed surfaces of wall,floors etc complete all as specified and directed.

M&L for point wiring using FRLS PVC insulated unsheathed /multistranded copper conductor cable 1.5 sq mm drawn through and including pvc conduit marked and of appropriate size as specified, fixed in conceeled of wall/ceiling with mild steel sunken box and bakelite sheet 3 mm thick including all fittings such as tees, bend and junction boxes etc complete all as specified and directed.

One light/Fan point controlled by one switch 5 Amps one way using cable (1.5 Sq mm for phase and neutral and 1.5 sq mm earthing)

One 5 Amp socket outlet on independent board.

c) One 5 Amp socket outlet on same board.

All as per Item Srl No 82 above but for one socket outlet 15 Amps on Independent board using cable (2.5 Sq mm for Phase & neutral and 2.5 Sq mm for earthing), complete all as specified and directed.

S&F Sheet metal enclosure factory made (double door) shutter type for DB SPN, 240 Volts, 12 ways with 200 Amps rated bus bar, neutral link, earth bar complete all as specified and directed.

S&F in replacement SPN 40 to 63 Amp, type 'C'10KA, 240 Volts.

S&F in replacement MCB SP 5 to 32 Amp, 'C'10KA, 240 Volts.

S&F Switch piano, flush type 5 Amp, One Way.

S&F socket outlet 2-in-1, 3 pin 5 Amp.

S&F Switch piano, flush type 15 Amp, .

S&F socket out let 2 in 1, 5 & 15 Amp flush type.

S&F ceiling rose 3 terminal size 50*65 mm surface type.

S&F Electronic fan regulator flush mounting step type 300-400 watts complete.

S&F LED Lights fitting 1x18 watt,220V, AC Decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

S & Replacement for angular type Lamp holder PVC policarbonate type with back plate including Lamp 7Watt complete all as specified '

Earthing complete with galvanised earth plate electrode 60 cmx 60 cmx 6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5M belownormal GL connected to GI wire 4mm as earthing lead by means of nut,bolts and check nut and washer,GI light grade protection pipe 15 mm dia. upto 7.5 m,GI watering pipe 20 mm dia,RCC cover with funnel,excavation in any type of soil,PCC pit charcoal ,salt all as shown in electrical plate No 5 of SSR Part I, including earth test point up to pannel board,all as specified or indicated including testing on completion.

M & L for submain wiring with copper conductor PVC insulated FRLS of size 2 x 10 sqmm alongwith earth wire of size 1 x 10sqmm on wall surface with and including PVC casing caping of suitable size complete all as specified and as directed by Engr in Charge.

S & F of sheet metal enclosures distribution boards, double door ,VTPN, 415 volts 4 ways (one incoming three phase & twelve out goings single phase )for MCCB & MCB,s comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed and comprising of the following a) MCCB FOUR POLE 100 AMPS AC 415 VOLTS 16 KA=01 NO (for incoming ) (b) MCB SP 63 amps = 04 Nos (for outgoings) . ( Note :- (i)The DB shall be VTPN series (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost.(iii)connection of the MCCBs/ MCBs with cable shall be made through appropriate size pin /bottle type thimble properly crimped.(iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size. (v) Double continuous earth wire shall be provided for each three phase DB from earthing mains dolly. (vi) cutting chasing shall be part of job at no extra cost .

Supply & FIX EXHAST FAN made of sturdy engineering plastic complete with lovers shutter,voltage 230v,50 HZ, RPM 1200,COPPER WINDING OF SWEEP 300MM, complete all as specified and directed.

S& F LED Street light fitting 35 watt 230 v AC out door type with high pressure die complete with driver,lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with ip 65/66 protection complete,including bracket, complete all as specified and directed.

S & F Recess mounting LED 2X2 luminaire light fitting complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of 1.5 Sq mm with suitable size of 36 watt complete all as specified and directed.

S & F Round shape 15 watts 220 volts AC, recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

S&F LED Mirror light ,220V, AC Decorative type with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply & fixing LED Bulk head Sirius Series 10 W LED light

Supply and fixing XLPE, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 core Fixed through wall with saddles /through pipe/ ,under culvert or in air complete all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr wide and n. exc. 1.5 mtr in depth for foundation of pole and laying of UG cable and getting out in any type of soil complete all as specified and directed.

Returning filling in, including spreading, watering and well ramming in layers not exceeding 25 cm thick in any type soil complete all as specified and directed.

Removing excavated material (soil) to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

M & L for Sand cushioning for under ground cable upto 8 cm before laying the cable and 15 cm after laying and stretching the cable complete all as specified and directed. Note : Punned thickness shall be measured & paid )

Material and labour for sub class B brick old size covering laid dry ,flat transversely along the length of cable on sand cushioning with width eqal to the length of the brick complete all as specified and directed.

Supply, fixing & laying GI pipe light grade 50mm bore in trench, under floor, wall and on pole for cable protection, complete all as specified and directed.

Note:- The contract sum arrived after deduction of amount of Sch of credit as listed in tender Documents.

BALI ENTERPRISES (BID ID -3275042)

THAKUR BUILDERS AND CO (BID ID -3278541)

MANOTRA BUILDER (BID ID -3278462)

G N TRADER AND BUILDERS (BID ID -3275055)

M/S RAJESH SHARMA & CO. (BID ID -3274746)

Manminder Singh and Co (BID ID -3278621)