2nd Call for EXECUTION OF 05 NOS PMW OF BR NATURE AT OTM COMPLEX MAIN OFFICE AREA OF HQ DGBR COMPLEX SEEMA SADAK BHAWAN RING ROAD DELHI CANTT NEW DELHI 10 IN THE AREA OF 1353 GE 21 BRTF UNDER PROJECT SHIVALIK

Amount

PART - I (PMW-06 ) RENOVATION OF OFFICERS' MESS KITCHEN IN HQ DGBR, NEW DELHI

Demolition of Cement Concrete (reinforced) of any description and in any position not otherwise specifically provided for (Reinforcement cut as required to facilitate demolition).

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L Rendering cement plaster 1:3, 5 mm thick on fair faces of ceiling concrete surfaces to be finished even and smooth (without using extra cement)

Taking down chowkhat or frame exceeding 1.5 sqm but not exceeding 4 sqm each with shutter (without taking off shutter from the frame)

M&L Glazed coloured ceramic tiles mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match

M&L Cement concrete 75 mm thick type C-2, 1:3:6 (20mm graded aggregate)

M&L Granite (of any type) stone/tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete

M&L preparing newly plastered surfaces of ceiling and applying two coats of oil bound distemper including 1.5-2.0mm wall care putty on ceiling complete.

S & F High density polyethylene pipes (HDPE) 15 mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S & F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) bends 75 mm radius

S&F in repair Stop valves 15 mm dia fancy chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F in repair CP Bib taps long body 15 mm bore type fancy type with crutch or butterfly handle, screwed down screwed for iron pipes or for brass ferrule and fixed

S&F CP Towel rail 60 cm long 20 mm dia D Type fixed with and including Chromium plated brass screws and wooden/plastic cleats

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm

S & F in repair 32mm dia and 60 cm long PVC waste pipe complete all as specified and directed.

Supply and fixing factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-Charge

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. (Glass shall be paid separately) including all UPVC fittings.

M & L for Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated FRLS un sheathed multi stranded copper conductor drawn in and including non metallic rigid PVC concealed conduit of med grade of suitable size with all fittings and accessories including factory made MS/ pressed modular terminal box with zinc coated duly concealed in wall including modular metal flush boxes reqd as per site reqmt for mounting switches, sockets fan regulators etc. including continuous earth wire PVC insulated 1.5 Sq mm FRLS copper conductor connecting to common earth and earth dolly complete all as specified :- For one light point controlled by one switch

All as per item No. 1.25 here-in-before but For one fan point controlled by one switch

All as per item No. 1.25 here-in-before but For one 5 pin socket out let 5 amps on same bd complete.

All as per item No. 1.25 here-in-before but For one 5 pin socket outlet 5 Amp controlled by one switch on independent board.

All as per item No. 1.25 here-in-before but with 2.5 sqmm multistrand copper conductor cable for one 15 Amp socket outlet controlled by one switch on independent board and 1.5 sqmm PVC insulated multi strand copper conductor cable as continuous earth wire complete.

Supply and fixing ceiling rose surface bakelite 3 terminals 65x50mm complete all as specified

S & F modular white cover plate with frame of 08 module

S & F modular white cover plate with frame of 03 module

S & F modular white cover plate with frame of 02 module

S&F Modular switch 1 way 06 amp single pole

S & F modular switch socket combination 16A, 6 Pin of 3 module

S & F of modular socket outlet 6A-5 pin combined of 02 module

S & F of modular fan step regulator 120 W-2 module

S&F Ultra bright LED Tube light fitting of LED 22 w including reqd length of 1.5 Sqmm PVC multistranded copper conductor ro electrical connection from ceiling rose to connector of LED fitting including testing on completion all as specified and directed. Make :- Halonix/Wipro/Havells/Syska or equivalent

M&L for sub main wiring with 2 runx 6 Sqmm + 1 run x 4 sqmm earth wire single core PVC insulated cable unseathed multistranded FRLS copper conductor LT 1100 volts grade FRLS cable IS-694 (ISI marked with valid CML No ) drawn in & including PVC conduit of dia not less than 25mm (ISI marked with valide CML No ) including its all fittings/accessories with one run single core copper cable 4 sqmm multistranded conductor ( ISI marked with valide CML No) colour code as a earth continuity and connecting upto DB all as specified and directed.

S&F, in repair, MCB DB, sheet metal enclosures double door SPN 8 way with 200 Amps rated bus bar 240 volts 2 in 1 shutter (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 Amps, 240 volts 'B' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 240 volts, 6 to 40 Amps, 'B' series 10 KA including connection with suitable size copper lugs. complete all as specified and directed.

S&F sheet metal enclosure, single pole and neutral with a two pin and earth plug and socket with and including one single pole MCB 20. Amps, 240 volts,10 KA complete all as specified and directed. Make :- Legrand/Siemens/Scheider.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)

Supply and fix exhaust fan, steel body AC single face voltage 230V of size 450 mm sweep heavy duty, blades and frame and louvers

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc.

PART - II (PMW-05) RENOVATION OF 05 NOS TOILET IN OFFICERS' MESS AT HQDGBR, NEW DELHI

M & L for non skid coloured rectified tiles 7 to 8mm thick double charged/Nano Tech floor tiles(square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set & jointed in neat cement slurry and pointed in coloured cement grout to match including 15mm thick CM (1:4) screed bed or bedding layer incl dismantling of old existing tiles or flooring of any description, thickness including removal rubbish up to five story bldg beyond MoD land, all as specified all complete all as specified and directed.

M & L for glazed rectified/Digital/nano tech coloured tiles in vertical surface size 300mm x 600mmx7 mm thick or 450mm x 600mmx7 mm thick (As approved by user) set and jointed in neat cement slurry and pointed in coloured cement grout to match including rendering 10mm thick in CM (1:3) as in backing coat incl dismantling of old existing tiles incl bedding finish complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc. but excluding ashlar facings, dressed stone work including removal rubbish up to five story bldg beyond MoD land, complete all as specified and directed.

Material and labour for brick work using sub class B bricks (old size) straight or curved on plan exceeding 6m mean radius built in CM (1:4) complete all as specified and directed.

Taking down cement plaster of any description on brick wall/ceiling or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water etc. including removal rubbish up to five story bldg beyond MoD land, complete all as specified.

M&L for 15mm thick rendering on brick work wall/Ceiling in cement mortar 1:4 using water proofing compound as per manufacturer's instructions incl finishing the surface even and fair complete all as specified and directed. Note: WPC shall be measured & paid for separately.

M&L for applying two coats of oil bound distemper (approved quality & tint) using painting rollers over a coat of alkali resistance primer on walls/ceiling on prepared surfaces under items here-in-before complete all as specified and directed.

M&L 18-20mm thick black granite of size in single pieces with full width of wall (tabled rubbed, polished and moulded) as in columns, steps, window cills, floor, skirting and like laid over 15mm screed bed or plastering in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with the shade of granite including dismantling of stone slab including removal rubbish up to five story bldg beyond MoD land, complete all as specified and directed by the Engr-in-Charge.

M&L for PCC 1:3:6 Type C-1 (using 20mm graded stone agg) as in benching,bed plates,flooring etc of manhole complete all as specified and directed.

Taking down wooden/steel chowkhats/windows/door frame including shutter (without taking off shutter from frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing to or from store complete all as spd & directed.

S&F Providing and fixing factory made UPVC white Colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm (+-0.2mm).Window profile with hollow section with mitlti chamber frame (60mmx 58mm) sash (60mmx78mm). T profile (One vertical length in between two shutters) (60mmx 74mm). Glazing bead (35mmx25mm) will be mitered cut and fusion welded at all corners, including drilling holes for fixing hardware and drainage of water etc. making arrangement for fixing of hardware. EPDM gasket 1.2+-0.2mm thick galvanized steel frame (28mmx21.5mm), sash (31mmx27mm), T profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware:(casement door handle made of zinc alloyed (white powder coated). Corner striker. secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strickes. 3D Hinges of Zinc alloyed (tinted powder coated)(and 6mm thick frosted toughened, glass. and hydraulic door closer as required. complete all as specified.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches and wall if required, Internal dia of pipe 100mm dia up to five story bldg as required scaffolding complete all as spd & directed.

Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if required, Internal dia of pipe 75mm up to five story bldg as required scaffolding complete all as spd & directed.

S&F 100mm bore CI sand cast soil, waste or vent pipes in any length with or without ears with cement joints laid in trenches, floors or fixed to walls up to five story bldg as required scaffolding all as directed.

All as per item No. 3.14 here-in-before but 75mm bore of pipe.

S&F 100mm bore sand cast iron bends (any radius) diminishing pieces or tapers (larger bore to be measured) with oval access doors complete all as spd and directed.

All as per item No. 3.16 here-in-before but 75mm bore of pipe.

S&F 100mm bore CI sand cast branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches including oval access door complete all as spd and directed.

All as per item No. 3.18 here-in-before but 75mm bore of pipe.

S & F in repair 15mm dia medium grade galvanized steel tubes with all fittings and fixed or concealed complete to walls and ceilings or laid in floors incl taking down old steel GI tubing up to five story bldg as reqd scaffolding/props complete all as specified and directed.

-ditto- but 20 mm bore pipe.

-ditto- but 25 mm bore pipe.

S & F in repair PVC connection 15mm dia and 60 cm long with 2 Nos PTMT check nuts with washers complete all as specified and directed.

S & F in repair 32mm dia and 60 cm long PVC waste pipe complete all as specified and directed.

S & F in repair 15mm dia bib tap long body with capstan head, screwed down, screwed for iron pipe, fancy type, cast copper alloy, chromium plated with wall flange complete all as specified and directed. (Make : Jaguar Cat Part No. CON-107KN)

S & F in repair 15 mm dia BASIN MIXER cock long neck with aerator, cast copper alloy fancy type, chromium plated,screwed down high pressure, with wall flange, with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe & fixed complete all as specified and directed. Make : Jaguar Cat Part No. CON-CHR-167KNB continental series.)

S & F in repair 15 mm bore angle valve, cast copper alloy screwed down high pressure with capstain head with long shank & cup complete all as specified and directed. Make : Jaguar Cat Part No. CON-053KN continental series)

S & F in repair over head shower rose of size 150x150mm square, single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system along with CP brass shower arm cted 190mm long flat shape for wall mounted shower with flange complete all as specified and directed. Make : Cat Part No. OHS-35495 of Jaquar for shower rose and Cat part No. SHA-CHR-483 for shower arm.

S & F in repair plastic water closet seat cover for recessed or flat EWC/Anglo Indian type WC, white, with flat bottom and cover incl. PVC or chromium plated hinging device complete all as specified and directed.

S & F in repair PVC valve less syphonic action type flushing cistern 10 ltr capacity, low level, white with inlet, ball valve, float and handle including brackets and connection to pipes and fixing of chain and pull or lever if any complete all as specified and directed. (Make : Jaquar/Hindware/ Commander)

S & F in repair 15 mm bore concealed stop cock, regular body with adjustable wall flange, complete all as specified and directed. Make : Jaguar Cat Part No. CON-083KN continental series.

S & F in repair chromium plated jet spray including connection pipe complete all as specified and directed. Make : EssCo by Jaquar

S & F in repair chromium plated soap dish complete all as specified and directed. Make : Jaguar Cat Part No. CAN-1131N.

S & F in repair hand shower (health faucet), 1m long easy flexible tube in chromium finish and wall hook complete all as specified and directed. Make : Jaguar Cat Part No. ALD-CHR-565 .

S & F in repair chromium plated towel rack 600mm long with lower hanger complete all as spd & directed. (Jaguar Cat Pat No. ACN-1181N .

S & F in repair chromium plated towel ring square with round flange complete all as spd & directed. (Jaguar Cat Pat No. ACN-1121N .

M & L for chromium plated toilet paper holder complete all as specified and directed. Make : Jaguar Cat Pat No. ACN-1153N.

S & F in repair vitreous china white European type WC with 'P' or 'S' trap including connection to drain pipes, traps, PVC flush pipe (excusive flushing cistern) and PVC seat cover and fixing bolts etc. complete all as spd & directed. (Make : Jaguar CNS-WHT-551SSPP)

S&F in repair vitreous chinaware wash hand basin flat back of size 570mm x 470mm complete including provision of pair of mild steel angle iron brackets of suitable size duly painted, 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall with Pedestal etc. complete all as specified and directed. Make : Jaguar ARS-WHT-39801 + ARS-WHT-39301

S&F Grating square (SLIT) 150mm of PTMT. (Minimum weight 100 gms)

PART-III (PMW-03) PROVISION OF CHAIN LINK FENCING TO VARIABLE REFRIGERANT VOLUME (VRV) OUTDOOR UNITS

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil.

M&L Cement concrete (20 mm graded aggregate) Type B2 1:2:4 in foundations, filling and mass concrete

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts;

S&F Framed work Fe 410 -W (Gde-E- 250) quality-A as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

S & F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

S&F Mild steel bars 10mm dia Fe-410-W (Part I) (Gde.E-250) Part- I quality-A or Fe 290 (Gde - E-165)and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Supply of Chain link MS galvanized fencing, any size or type

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

M&L for preparation of New steel and iron surfaces of any description applying two coat of synthetic enamel paint over a coat of red oxide paint.

PART-IV (PMW-04) PROVN OF ROOF COVERING SHADE AND CERTAIN MISC B&R WORKS IN SUPVERS MESS AT HQDGBR, NEW DELHI

Demolition of Cement Concrete (Unreinforced) of any description and in any position not otherwise specifically provided for.

Taking down cement plaster on brick or stone walls,etc. including raking out joints, hacking for key, scrubbing down with water, etc.

M&L for Steel work in tubular trusses, rafter, purlings etc including special shaped washer etc. complete using ERW or induction butt welded tubes

S & F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

S & F Welded steel wire fabric supplied and fixed complete to wood or steel members weight not exceeding 4 kg per square meter

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples

S & F 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with self stappling screw and washer in roof, wall etc.

S&F Mild steel, plain, black sheet 1mm thick in cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required for funnels tusk etc.

M&L for prep of new or previously untreated surface of any description of steel surface and applying two coat of synthetic enamel paint over one coat of red oxide

M&L PCC 1:2:4 (20mm graded aggregrate) type B1 for string courses, copings. kneelers, apex stones, pier caps,bed plates including weathering slightly rounded or chamfered angles and throating as directed

M&L Brick work with sub class ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:4

M&L Rendering 15mm thick cement plaster in 1:6 on fair faces of brick work or concrete surfaces to be finished even and smooth (without extra cement)

M&L for prep of newly plastered surface of wall and applying two coat of cement base paint

M & L Glazed coloured ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including Rendering 10mm thick in cement mortor 1:4 on brick work or concrete surfaces.

M & L Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

S & F High density polyethylene pipes (HDPE) 15 mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S & F High density polyethylene pipes (HDPE) 20 mm dia of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc.

S & F PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls

S & F PVC (SWR) bends 110 mm radius

S & F PVC (SWR) bends 75 mm radius

S&F Wash basins 580 x 450 mm vitreous China (flat back or angle back type) including cutting or pinning in ends of brackets or errecting stand and including CP waste cuppling, PVC waste pipe, PVC Connection 15 mm dia x 600 mm length and CP pillar taps fancy type

S&F Stop valves 15 mm dia fancy chromium platexd, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F CP Bib taps long body 15 mm bore type fancy type with crutch or butterfly handle, screwed down screwed for iron pipes or for brass ferrule and fixed

S&F CP Towel rail 60 cm long 20 mm dia D Type fixed with and including Chromium plated brass screws and wooden/plastic cleats

S&F Butt hinges 100 mm medium weight cold rolled mild steel

S&F Mild steel sliding door bolts 300 mm length, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed

S&F SS vegetable basket/wardrobes in mess for vegetable storage, it is made of rectangular frame section with stainless steel, 2mm thick stainless steel wire mesh including necessary fittings including welding TIG/MIG as required, all sections/ fittings used by SS-304 will be high glossy polished all as specified and directed by Engr-in-Charge.

PART-V (PMW-02) PROVN OF 50 K LTR CAP WATER STORAGE AT OTM COMPLEX HQDGBR, NEW DELHI

Excavating in trenches in hard/dense soil, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

Removing excavated material exc. 1.50 km but n exc. 5 km and depositing where directed

Returning, filling in hard/dense soil, including spreading, levelling, watering and well ramming in layers not exc 25 cm.

M&L Hardcore of gauge n exc. 63 mm broken stone or boulder deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for Type D2 1:4:8 40 mm graded aggregate Cement concrete in foundations, filling and mass concrete

M&L for 100 mm thick Type B1 1:2:4 20 mm graded aggregate Cement concrete

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement lime mortar 1:4

M&L for Rendering 15 mm thick Cement Plaster 1:4 on fair faces of brick work or concrete surfaces finish even and smooth with using extra cement

M&L for 40 mm GI water tube medium grade with all fittings and fixed complete to wall and ceiling or laid in floor. Note: The rate of scaffolding as required to be including in this item. Scaffolding not be paid separately.

S&F 40 mm bore dia Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F of Capacity 10000 Liter Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 40 mm dia float valve. Make - Sintex/Supreme

S&F 20 meter head 40 x 40 mm dia 2 HP Single face electric water pump of copper binding. Make - Teximo/Kirlosker/Crompton

Deduct for Schedule 'A' (Credit of Schedule)

garg construction company (BID ID -3120742)

jain associates (BID ID -3122760)