Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.0 LAccepted-AOC | ₹28.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹28.1 LRejected-Finance | ₹28.1 L | L2 | Rejected-Finance Rejected |
| 3 | L3₹31.2 LRejected-Finance | ₹31.2 L | L3 | Rejected-Finance Rejected |
| 4 | L4₹31.3 LRejected-Finance 88 267 CHAMAN GANJ KANPUR 208001 | KANPUR | KANPUR | UTTAR PRADESH | 208001 | ₹31.3 L | L4 | Rejected-Finance Rejected |
| Sl No | Description | Qty | Unit | AMIT SPEHIA L3 | KHAN & ASSOCIATES L4 | Shri Chand L1 | SOURAV SHARMA L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Site clearance Clearing jungle manually including uprooting rank vegetation, grass, woody vegetation up to 30 cm girth measured at height of 1 m above ground level and removal of rubbish up to distance of 50 m outside the periphery of the area cleared. | 640.86 | sqm | 12 ₹7,690.32 | 100 ₹64,086 | 10 ₹6,408.6 | 9.5 ₹6,088.17 Lowest |
| 2.00 | 1.8 Meter High G.I. Barbed Wire Fencing 1.8 meter high G.I. barbed wire fencing with 2.4meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications | 704.24 | m | 856 ₹6,02,829.44 | 100 ₹70,424 Lowest | 750 ₹5,28,180 | 708 ₹4,98,601.92 |
| 3.00 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) windows of area 3sqm and below. | 6 | Each | 170 ₹1,020 | 500 ₹3,000 | 90 ₹540 Lowest | 170 ₹1,020 |
| 4.00 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3sqm and below. | 9 | Each | 320 ₹2,880 | 500 ₹4,500 | 100 ₹900 Lowest | 265 ₹2,385 |
| 5.00 | Supplying pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality fixed in position excluding the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.(d) Doors and windows frame of size 161mm x60mm with 40mm wide double rebate weighing 4.05kg per meter. | 100.09 | m | 589 ₹58,953.01 Lowest | 600 ₹60,054 | 1,450 ₹1,45,130.5 | 605 ₹60,554.45 |
| 6.00 | Supplying onenable steel windows of standard rolled steel Z section joints mitered and electrically flash welded with iron fittings including necessary iron handles, Peg stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.(b) Above one sqm area. | 491.94 | kg | 121 ₹59,524.74 | 100 ₹49,194 Lowest | 120 ₹59,032.8 | 120 ₹59,032.8 |
| 7.00 | Wrought iron & mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. | 7.81 | Qtl | 12,655 ₹98,835.55 | 100 ₹781 Lowest | 7,900 ₹61,699 | 10,500 ₹82,005 |
| 8.00 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) glass panes 4mm or 10.75 kg/ sqm exceeding 0.4 sqm of area. | 12.99 | Sqm | 621 ₹8,066.79 | 100 ₹1,299 Lowest | 550 ₹7,144.5 | 635 ₹8,248.65 |
| 9.00 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5mm width fixed with machine screws complete in all respects. | 12.99 | Sqm | 1,325 ₹17,211.75 | 100 ₹1,299 Lowest | 250 ₹3,247.5 | 1,050 ₹13,639.5 |
| 10.00 | Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same of position.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick. | 16.25 | Sqm | 3,891 ₹63,228.75 | 2,500 ₹40,625 | 1,750 ₹28,437.5 Lowest | 3,550 ₹57,687.5 |
Tender Value
₹28.6 L
EMD Value
₹57,151
Closing Date
4 May 2026, 11:00 amClosed
Executive Engineer RM Division BBMB Talwara
Executive Engineer RM Division BBMB Talwara Sector 2
Providing Fencing and Renovation of Building of Research Labortary (Near Jawalaji) at Beas Dam site
2026_BBMB_274164_1
DNIT No 05/2025-26
Open Tender
Civil Works
Tender cum Auction
120 days
Jawalaji Himachal Pradesh
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹57,151
5 Aug 2026
11 Apr 2026
5 May 2026
11 Apr 2026
4 May 2026
11 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Site clearance Clearing jungle manually including uprooting rank vegetation, grass, woody vegetation up to 30 cm girth measured at height of 1 m above ground level and removal of rubbish up to distance of 50 m outside the periphery of the area cleared. | 640.86 | sqm | - | - |
| 2 | 1.8 Meter High G.I. Barbed Wire Fencing 1.8 meter high G.I. barbed wire fencing with 2.4meter angle iron posts 50x50x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 12 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications | 704.24 | m | - | - |
| 3 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (b) windows of area 3sqm and below. | 6 | Each | - | - |
| 4 | Removing Doors and windows (steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3sqm and below. | 9 | Each | - | - |
| 5 | Supplying pressed steel sheet frames (chowkhat) consisting of 18gauge (1.25mm thick steel sheet of the specified section, including iron lugs (hold fast) iron hinges conforming to PWD specification including bolts for fixing stops lock notch provision for receiving tower bolts and finished with 1 primer coat approved quality fixed in position excluding the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete.(d) Doors and windows frame of size 161mm x60mm with 40mm wide double rebate weighing 4.05kg per meter. | 100.09 | m | - | - |
| 6 | Supplying onenable steel windows of standard rolled steel Z section joints mitered and electrically flash welded with iron fittings including necessary iron handles, Peg stay catchers bolts, iron plugs and pressed steel projected hinges and glazing clips, complete (Excluding glazing) and finished with two coats of ready mixed paint red lead non setting primer.(b) Above one sqm area. | 491.94 | kg | - | - |
| 7 | Wrought iron & mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position. | 7.81 | Qtl | - | - |
| 8 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make.(b) glass panes 4mm or 10.75 kg/ sqm exceeding 0.4 sqm of area. | 12.99 | Sqm | - | - |
| 9 | Wire gauge fixed in steel windows, of standard rolled steel section with 3mm thick flat iron cover moulding of 12.5mm width fixed with machine screws complete in all respects. | 12.99 | Sqm | - | - |
| 10 | Factory manufactured flush door fixed in position iron hings, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same of position.(c) Decorative with teak facing on both sides edges lipped with teak with laminated core.(iv)35mm thick. | 16.25 | Sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 7.56 MB
BOQ_320065.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].