ADDITION ALTERATION AND SPECIAL REPAIRS TO BLDG No P 281 AND P 238 UNDER GE I NAVY JAMNAGAR

Amount

Taking down cement plaster of any description including racking out joints, hacking for key scrubbing down with water etcand removal of entire debris as ordered outside MD land complete all as directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etcand removal of entire debris as ordered outside MD land complete all as directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exceeding 15 cm thick above or below ground level and removal of entire debris as ordered outside MD land complete all as directed.

Demolition of reinforced cement concrete of any description and in any position including removal of entire debris as ordered outside MD land complete all as directed.

Dismantling wrough iron or mild steel work of any description not other wise provided for and stacking at site complete all as directed.

Dismantling floor, hearth or wall tiling inluding cement mortar bedding (but not backing), stacking serviceable tiles at site and removal of entire debris as ordered outside MD land complete all as directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from frame) and stacking at site where directed.

All as per item 7 here-in-above but exceeding 1.5 Sqm but not exceeding 4 Sqm each

Taking down shutter of any description n.exc 1 Sqm each and stacking at site where directed.

All as per item 9 here-in-above but exceeding 1 Sqm but not exceeding 2 Sqm each

Excavation in trenches and not exe. 1.5 m wide and not exe. 1.5 m in depth for foundation of drain, man hole, laying of cables, stay etc. not exe. 10 Sq. m on plan and not exe. 1.5 m depth and getting out in soft / loose soil.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soil complete all as specified and directed.

Removing excavated surplus soil to a distance not exceeding 50 Mts and depositing where directed .at a level not exceeding 1.5 M above the starting point complete all as directed.

M&L for Precast Reinforced cement concrete 1:2:4 type B1 using ( 20 mm aggregate stone aggregate) as in cover slab to Man holes set and jointed in cement mortar 1:6 complete all as directed (Note: Reinforcement shall be measured and paid seperately.)

Providing precast ce- ment concrete Type B1 1:2 :4 using 20 mm graded crushed stone aggregate as in in landings, kitchen shelves, manhole cover, Chajjas etc. and similar articles with plain faces and set in cement mortar 1:4 complete all as directed.

M&L factory made pre cast PCC 1:3:6, type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks, exceeding 10 cm in width and setting in CM 1:6 complete all as specified.

M&L factory made pre cast PCC 1:3:6 type C1 (using 20 mm graded granite aggregate) as in block masonry with solid blocks or slabs, 10 cm thick (plain or interlocking joints) and setting in CM 1:4 complete all as specified.

M & L for Reinforced cement concrete 1:2:4 type B1 using 20mm graded crushed stone aggregate in lintels over 1.5 m clear spans complete all as specified and directed.

M&L Providing precast cement concrete louvres and jallies, 35mm thick (measured solid), including all mould- ings and frame, Type B0 1:2:4 (12.5mm graded aggregate) set in Cement mortar 1:4. complete all as directed.

Cutting holes in brick works of size not exc half brick built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required including making good as per its original specification with out any extra cost complete all as directed.

Cutting chases in brick/ stone wall, pinning in, making good to facing where required and plastering in CM 1:4 to ends of edges of landing, steps, cills, lintels etc and cutting chases not exceeding 10 cm girth for concealed water tubing and making good cutting as per its original specfication complete all as directed.

Supply only Integral Water Proofing Compound (ISI Marked) of Make : CICO , Acco Proof , Impermo , Aqua flex as approved.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished of concrete flat complete all as directed.

S&F Second class hard wood factory made kiln - seasoned, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints and fixed in position complete all as directed.

S&F 35 mm thick second class hard wood factory made plain framed panelled door shutter (any number of panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12mm thick veneered particle boards with commercial veneering on both face the size of rail and style as per IS - 1003 (Part I) kiln seasoned and chemically pressure treated and fixed to chowkats complete all as directed.

S &F 35 mm thick second class hard wood factory made glazed and skeleton shutter open rebated and prepared to receive glass, guage etc edge of framing plain chamfered or rounded fitted with cut and mitred beads for securing guage etc size of members of shutter as specified in SSR Part I Section 8 clause 8.24 (a) supplied and fitted to chowkats.

All as per item No 26 here-in-above but divided into squares, with plain chamfered or rounded, mitred and ribeted sash bars any numbers as in window shutter 30 mm thick all as specified in SSR Part I Sec 8 Clause 8.24 (b).

S&F solid PVC door frame of size 50X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.

S&F factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per Specification & drawing.

S&F 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balacing white lamination, fixed with screws to timber frame work including external teak wood lipping, 6mm thick fixed with nails complete all as directed.

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frames and shutter for doors, windows and ventilators with one or more rebates including joining cleat for fixing etc. complete all as directed.

S&F S&F aluminium anodised DECO grill 10mm thick DG 104 not less than 3.97Kg/Sqm fixed with necessary H/F/H channel etc complete all as specified and directed.(DECO grill fixed with windows with all fittings complete all as directed.

S&F XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

S&F in repiar XPM design aluminium alloy wire mesh, 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples along with wooden beads.

S & F 200 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F 150 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S & F 100 mm long aluminium, anodised , barrel tower bolt (ISI marked) of extruded section and fixed.

S&F 75 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size butt hinges, medium weight cold rolled mild steel and fixed .

S&F 100 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S&F 150 mm size aluminium alloy handles (ISI Marked) fabricated type anodised and fixed.

S & F 300 mm long aluminium alloy, anodised sliding door bolt (ISI Marked) with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 300 mm size mild steel ordinary rat tail rod pattern springs in-cluding roller and roller plate complete all as directed.

S&F 75mm door stopper of aluminium alloy body with rubber bottom fixed with screw in bottom rail of door complete as specified.

S & F Aluminium plate type II Gate and shutter, hook & eye 150 mm size fixed with screws complete all as specified.

S&F 100 mm hasp and staple, safety type of aluminium, anodised, including bolts to hinge type, fixed with screws complete all as specified.

S&F 1st class hardwood Small fitting such as brackets of any type,latch and hinge blocks, shaped door and window stops and the like including all necessary labours, articles not exceeding 200 Cu.cm each complete all as direced.

M&L framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S & F 10 mm dia and over TMT bars cut to length bent to shape required cranking including bending , hooking ends etc and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per item No. 49 here- in – above but 5 mm dia and over upto 10 mm dia as in stirrups - do -

M&L mild steel framed work such as in angles, bars, flat iron etc for holdfast and similar work conforming to Fe.290.Gde-E-165

S&F S&F mild steel Framed work angles or tees with web and flanges welded with connected section and fixing with screw into existing wall surface at any positin fixing complete conforming to Fe 290 Gde E-165.

S&F pre-painted galvalume (zincalume) aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof coverings/cladding to walls fixed with self tapping screws as specified.

Material and labour for removal of existing WPT course or any other kind of treatment surface over roof slab and cleaning of surface with wire brushes and water removing of unsolvent materials and depositing of the same as directed outside MoD land and provide 15 mm thick screed bed/ bedding layer in CM 1:3 mixed with Water Proofing Compound (WPC) as per manufacturer instructions, including finishing the surface fair and even on RCC roof/ parapet once bedding layer of concrete is completely dried and apply oil bound bituminous primer @ 0.30 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.00 Kg/Sqm reinforced with non woven polyster matt weighing not less than 160 gms/Sqm including minimum 10 cm side over laps and 15 cm end lap torch sealed and bonded as per detailed procedure as directed and finally finished the top surface with two coats of thermal resistant paint complete all as specified and as directed. Note: (i) The quoted rate is deemed to be inclusive of taking down & removal of debris , 15 mm thick 1:3 screed & complete APP treatment. (ii) WPC will be paid seperately (iii) The work shall be carried out only through manufacturer or their authorised applicator and a written guarantee for work shall be submitted by the manufacturer for the effectiveness of WPT (iv) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface.

M &L for cutting out cracks to 'V' section in existing roofs or terrace cleaning out, wetting, grouting with cement and sand slurry1:3 all as specified.

M&L for 40mm avg thick plain cement concrete 1:2:4 type Bo using 12.5mm graded crushed stone aggregate as in sunken floor and finished the even and smoth without using extra cement complete all as directed.

M&L for rendering 15 mm thick in CM 1:6 on brick work/ stone work or concrete surface work finished even and smooth without using extra cement complete all as specified.

All as per item No 57 here-in-above but 10mm thick in CM 1:3 on ceiling,chajja,roof projection etc.

M & L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work/ stone work or concrete surfaces mixed with WPC as per manufacturer instruction , and finished the surface fair and even complete all as specified and directed.

All as per item No 59 here-in-above but 10mm thick in CM 1:4 in sunken portion walls etc -do- .(Note for item No 59 & 60 : WPC shall be measured and paid separately).

M&L for bitumen blown any grade, applied hot, two coats,to concrete or plastered surface at the rate of 1.5kg.per sq.m per coat at sunken portion complete all as directed.

M&L for Lime concrete with 40 mm graded stone aggregate Lime mortar 1:3 as in sunkun filling complete all as directed.

M & L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M & L non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all directed and specified.

M&L glazed ceramic designer tiles any shade or pattern as approved of size 600x300x7 mm thick, on verticals surfaces, set and jointed in neat cement slurry including 10 mm thick back coat in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all directed. (Note for item Nos 63 & 65 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M & L for machine cut mirror polished kota stone of size 60cm x 60cm & 18 to 20mm thick laid in floors over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed or bedding layer of mortar 20 mm thick for laying floor finishes with C M 1:6

M & L for machine cut mirror polished kota stone of size as ordered but of thickness 16 to18 mm thick laid in skirting over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including screed bed or bedding layer of mortar 10 mm thick for laying floor finishes with cement mortar 1:4 (Note for item Nos 66 & 67 : i) Quoted rate is deemed to be inclusive of cement screed. ii) Shade / pattern / Colour of tiles shall be got appproved before procurement).

M&L 16 to 18 mm thick granite slab (Jet Black) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wash basin counter and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite complete all as specified.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

S&F 4mm thick figured glass, ordinary quality and glazing with oil putty or wooden beads not exceeding 0.5 Sqm in each pane complete all as directed.

Three coats of white wash on newly plastered surface of walls after necessary preparation of surface complete all as directed.

All as per item No. 72 here-in-above but as in ceiling - do -

M&L preparation of old surfaces of walls ling including scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc including cornices, pilasters etc (Plastered or unplastered surfaces) and applying three coat of white wash of white wash complete all as directed.

All as per item No. 74 here-in-above but as in ceiling - do -

M&L preparing new plastered wall surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer over a coat of 1 mm thick white cement based wall care birla putty complete all as specified.

M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall and applying two coats of oil bound distemper over a coat of 1 mm thick white cement based wall care birla putty complete all as specified.

M&L preparing of newly plastered wall surface and & applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directecd.

M&L complete removal of existing treatment and preparing old plastered or unplastered surfaces of wall & applying two coats of cement base paint over a coat of alkaline resistant primer complete all as directecd.

M & L Two coats of 1st quality synthetic enemal paint over a coat of zinc chromate primer over any description of new steel surface over 10 cm in width or girth including necessary preparation of new steel surface complete all as directed.

M & L Two coats of 1st quality synthetic enamel paint over a coat of pink primer on new wooden surface of any description over 10 cm in width or girth including necessary preparation of new wooden surface complete all as directed.

One coat of first quality synthetic enamel paint of any description over 10 cm in width or girth on old painted wooden surface after necessary preparation of surface complete all as directed.

All as per item No 82 hereinbefore but on old painted steel surface

Taking down old 15 mm bore GI tubing and connection including cleaning for re fixing stacking at site where directed.

M & L for 15 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors in repairs complete all as directed.

Fixing only 15 mm bore GI tube medium grade with all fittings all new (ISI Marked) fixed to wall and ceiling or laid in floors making necessary connection and testing complete

M & L for 20 mm bore steel water tubing medium grade (ISI marked) with all new fittings (ISI marked) fixed to wall and ceiling or laid in floors in repairs complete all as directed.

S&F in repairs 15 mm bore bib taps, fancy type long body with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as directed. Make: Prayag 6509 or equvalent make approved by GE.

S&F in repairs two way bib taps with health faucet with 1.2m brass flexible tube of length as ordered and wall hook mounted type chromium plated for EWC Make : Prayag Cat Part No. 6509(bib cock) & BEA-85(health faucet) or equivalent in approved make.

S&F in repairs Gun metal gate or gate valves with iron wheel head screwed box and both ends for iron pipe for 20 mm bore of pipe or union complete all as directed.

S&F in repairs 15 mm bore stop valve fancy type, cast copper alloy, chromium plated, with long shank and cup (concealed type) screwed down high pressure with cruntch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified. Make: Prayag Cat No. 6518 or equivalent in approved make.

S&F in repairs stop valves for 15 mm bore of pipe cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. Make: Prayag Cat No. 6510 or equivalent in approved make.

S&F in repairs brass chromium plated shower rose 125 mm dia with or wihout swivel joint, any size, including fixing to steel pipe or union.Make : Prayag or equivalent as approved.

S&F in repairs Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as directed.

S&F in repairs Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as directed. Make : Prayag Cat No. BA 2S or equivalent in approved make.

S&F in repairs sheet glass shelf assemble consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and ralling 60 cm long complete all as directed. Make : Prayag or equivalent in approved make.

S&F new sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or cutting and fixing into granite platform including fixing cantilever brackets and connecting union to pipe overall size 495 x 420 mm bowl size 410mm x 330mm x 160mm complete all as directed .Make : Jayna Cat No. SBSD (05) or equivalent of Prayag, Nirali, Franke, Parryware, Neelkanth, Diamond

S&F 50 mm bore high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2, fixed to wall, ceilings or in floors etc. complete as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wall in repars complete all as directed.

S & F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in floors in repars complete all as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to wall in repairs complete all as directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber rings joints laid in floors in repairs complete all as directed.

S & F 110 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S & F 75 mm bore size PVC (SWR) bends any radius with access door including jointing the same with solvent cement complete all as directed.

S&F 110 mm bore size PVC (SWR) branch piece, single (single Y) equal or unequal including jointing the same with solvent cement complete all as directed.

All as per item No 106 here -in -above but 75mm bore.

S&F 110 mm bore size PVC (SWR) junction single(single T) equal or unequal with access door including jointing the same with solvent cement complete all as directed.

All as per item No 108 here -in -above but 75mm bore.

S&F in repair 75 mm size PVC (SWR) floor trap with grating including jonting the same with solvent cement complete all as directed.

S&F in repair 110 mm size PVC (SWR) 'P' trap with grating including jonting the same with solvent cement complete all as directed.

M&L mm size PVC (SWR) gully trap 125/110 mm including jonting the same with solvent cement complete all as directed.

S&F PVC (SWR) Vent cowl 75 mm bore size fixed complete all as directed.

S&F PVC (SWR) Vent cowl 110 mm bore size fixed complete all as directed.

S&F 550 mm X 400 mm size white flat back vitreous china wash hand basin including chromium plated pillar tap (Make: Prayag Cat No. 6502) cap stain head suitable for 15 mm bore of pipe , PVC connection 15 mm dia 45 cm long with chromium plated nuts and bolts and suitable washers, PVC waste 32 bore CP waste coupling chain and plug , porcelain stopper including CI bracket fixed in repair complete all as diirected.

S & F in repairs Vitreous china squatting pan "Orissa pattern" long pan of size 580 x 440 mm white with integral foot rest but (excluding flushing cistern and flush pipe ) including connection etc including setting the trap and pan in lime concrete ( 1 lime 2 sand or surki as ordered and 5 aggregrate ) , min. 150 mm thick alround and finished just below level of rim of pan to floor finish complete all as directed.

S&F in repairs 10 liters capacity PVC valveless, syphonic action type, flushing cistern, low level, white with inlet ball valve, float and handle including brackets and flush pipe of polyetylene of low or high density or 32 mm dia PVC connection pipe complete all as directed.

S&F in repairs PVC connection 15mm bore and 45cm long with two Nos of brass check nuts and washers complete all as directed.

S&F in repairs PVC waste pipe of suitable length for wash hand basin complete all as directed.

S&F 100 mm size PVC (SWR) multi floor trap with grating including jonting the same with solvent cement complete all as directed.

Dismantling of existing any type & any capacity water storage tank fixed in any description and stacking at site and S&F new 500 litres capacity (white colour) rotational moulded polythene water storage tank, (cylindrical vertical with close top) triple layer colour white both inside and outside with top cover including PVC float valve high pressure suitable for 20 mm bore of pipe with polythene float, fixture hoisted and fixed in position where ordered and making necessary connection and testing complete all as directed.

Taking , down carefully copper / aluminium point wiring ( Light ,Fan , socket or power) complete (fittings such as switches , celling roses, pendants , regulators, sockets , DB,s) etc all as specified and directed by Engr -in - charge.

Taking down carefully U/S Main switch and DB's incl wooden board, and removing from site incl making good disturbed surfaces of wall all as complete as specified and as directed.

Dismantling and taking down fluorescent tube light single/ double of any wattage or size , security light fittings for repair or replacement of bunt/worn accessories etc.

M&L for point wiring with 1100 V, 1.5 Sqmm single core PVC FRLS insulated unsheathed cable, copper conductor multistranded passing through including PVC concealed conduit 20mm, concealed MS box / PVC/ MS/ Cast Iron box and logic modular whtie plates of suitable as required at site with PVC insulated unsheathed stranded copper of size 1.5 sqmm earth copper cable, for one light point, bell point, fan point controlled by one switch including cutting and making good surface of walls applying suitable painting as required all as directed.

All as per item No. 125 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in same board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable complete all as directed.

All as per item No. 125 here-in-above, but for 6 Amp (2/ 3 pin), modular switch socket in independent board with earth wire 1.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

All as per item No. 127 here-in-above, but size of cable 2.5 Sq.mm for 16 Amp and 6 Amp (3 pin) combined, modular switch socket in independent board with earth wire 2.5 Sq.mm PVC insulated multistranded copper conductor cable all as directed.

S&F Modular switch 1 way 6 Amps,1 module all as specified and direced by Engr -in-Charge.

S&F Modular switch 1 way 16 Amps,1 module all as specified and direced by Engr-in-charg

S&F Modular Socket 6A -2/3 pin combinaed 2 Module all as specified and directed by Engr-in-Charge

S&F Modular Socket 16A -2/3 pin combinaed 2 Module all as specified and directed by Engr-in-Charge

S&F Modular Bell push 6 Amps, 1 module all as specified and directed by Engr- in -charge

S&F Bell Ding Dong AC 230 Volts, single pole / Multi Music type

S&F Step type electronic fan regulator modular type 120W ,2 Module

S&F TV socket out let 1 model Cat N0- 675546 Make-Legrand

S&F RJ 11 Telephone socket 1 module Cat N0- 675541 Make-Legrand

S&F in repairs Ceiling rose surface bakelite White / Ivory / Urea finish 50 mm dia three terminals including supply and fix PVC square mounting block complete all as specified and directed.

M&L For metal fluh boxes concealed for mounting concealed for mounting TV/ Telephone socket etc including logic modular plates and surrounds of suitable size make MDS Legrand cat No- 689060

S&F Rigid non -metallic PVC conduit exclusive of boxes( junction /terminal) but inclusive all tees bends elbows reducers and fixing accessories such as couplers lock nut saddles pipe hooks etc complete siz of 20mm

Taking down and refixing the same after repair work LED 4' Glaze LED Batten high quality design aluminium extruded with decorative end caps light fitting Make Jaguar Cat No : LGLZ01X024 XC 24 W CCT: all as specified and directed by Engr -in-Charge.

S&F (including Taking down light existing unsv light fitting ) LED 4' Glaze LED Batten high quality design aluminium extruded with decorative end caps light fitting Make Jaguar Cat No : LGLZ01X020 XC 20 W CCT: 6500 or equivalent in Wipro/Havells/Bajaj

Taking down and refixing the same after repair work LED 2' Glaze LED Batten high quality design aluminium extruded with decorative end caps light fitting Make Jaguar Cat No : LGLZ01X010 XC 10 W CCT: 6500 or euivalent in Wipro/Havells/bajaj

S&F led 25W security light / street light fitting in aluminium pressure die cast housing with glass cover & lens IP 66 CCT(k) 6000 fixed over 32 mm bore GI light grade bracket of size not less than 1.2 Mts long fixed to wall with GI clamps , making connections & testing on completion to the satisfaction of Engineer-in-charge.Make Jaguar Cat No : LSRT01S025XC or equivalent in Wipro /Havells /Bajaj.(Note : Quoted rate is deemed to be inclusive of GI bracket).

Taking down and refixing the same after repair work Ceiling Fan complete down rod and 3 core 1.5 sq. mm copper conductor cable from ceiling rose to fan complete with all accessories

Taking down and refixing the same after repair work an Exhaust fan complete with and 3 core 1.5 sg mm copper conductor cable from ceiling rose to fan complete with all accessories all as directed by Engr-in-Charge.

Taking down and refixing the same after repair work an electric geyser etc single phase all as specified and directed by Engr -in-Charge.

S&F Step type electronic fan regulator modular type 120W ,2 Module

Supply & Fix 300 mm sweep metal Body Exhaust Fans AC single phase 230/240 V of size . Make- Bajaj - Model No: Supreme Plus 300 mm 900 rpm Ind EX Fan and equivalent in all as specified and directed.

M&L for for cutting holes in brick /Stone walls in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required for fixing of exhaust fan

Taking down and refixing the same after repair work sheet metal enclosures for DB's double door in wall / nitch when MCB's to be used Triple pole and neutral, 4 way,415 Volt with 200 Amps rated Bus bar complete all as specified and directed.

Taking down and refixing the same after repair work 20 Amp single pole sheet metal enclosure with two pin and earth plug and socket complete with one single pole MCB etc all as specified and directed by Engr -in-Charge.

S&F sheet metal enclosures for DB's double door in wall / nitch when MCB's to be used Triple pole and neutral, 4 way,415 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclouser for DB'S in wall / Nitch when MCB's to be used Single pole and neutral, 4 way, Double door 240 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F sheet metal enclouser for DB'S in wall / Nitch when MCB's to be used Single pole and neutral, 8 way, Double door 240 Volt with 200 Amps rated Bus bar complete all as specified and directed.

S&F MCB TPN 63 Amp, 415 V , 50 HZ, 10KA, Cat No- 4086 - 83 Make : Legrand or Equivalent .

S&F MCB SPN 32 AMP 240/415 V , 50 HZ, 10KA, 4086 14-17, Make : Legrand or Equivalent

S&F MCB SP 240 V , 50 HZ, 10KA, suitable for lightning and other domestic load Rating 6-32 A Cat No- 4085 87 to 95 , Make : Legrand or Equivalent

M&L sub main wiring along with earth wire with the following size of 2x6.0 Sq mm and 1x 6.0 sqmm earth continuity conductor and connected to earth dolly, PVC insulated single core multi stranded copper conductor cable drawn into and including concealed 20mm PVC conduit of adequate width and length with all accessories and fittings like bends, crosses etc.(Note :- 2 runs 6 Sqmm cable , one run 6 Sqmm cable and one run of 20 mm dia PVC Conduit shall be measured as one unit length) .

M&L testing commissioning XLPE insulated ,armoured heavy duty electric cables with aluminium conducter 1100 volts grade, cross sectional area 25 sq mm 4 core & including taking down existing.

Supply and Lay HDPE (High density polyethlene pipe) of pressure reting 6 Kg /cm 2 for protection of cable laid in trenches of Size 50 sqmm

Taking down and refixing the same after repair work an electric meter in poly carbonate body with LCD display in class single phase ISI marked of rating 10 to 60 Amps as per IS 13779 with optical port and box.

M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead GI strip 25x4 mm, 7 mtr long by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrial plate No. 3 connected or indicated including testing on completion. Including necessary excavation, earthwork, PCC pit, RCC cover, funnel with watering pipe 20 mm bore light grade, GI protection pipe 40 mm bore medium grade complete including taking out existing any type of earthing complete all as specified.

rahil enterprise

M/s.Bhavin Electricals

badri glass and construction

Raj brothers

SIBS CONTRACTOR

SHELANI CONSTRUCTION

JAMNAGAR ELECTRIC AND MACHINERY CO