Tender for construction, drilling & developing of 150mm dia, 300 mtrs. deep, 15 nos. Shallow Borewell along with supply and lowering of pipes with labour and material with SITC of electrical and mechanical equipments along with accessories and Two years comprehensive repair and maintenance at different places of North west Zone and South west Zone of AMC.

Name of Work : Tender for construction, drilling & developing of 150mm dia, 300 mtrs. deep 15 nos. Shallow Borewell

along with supply and lowering of pipes with labour and material with SITC of electrical and mechanical equipments

along with accessories and Two years comprehensive repair and maintenance at different places of North West Zone and

South West Zone of AMC.

PART-A (construction, drilling & developing of 150mm dia, 300 mtrs. deep, 01 nos. Shallow Borewell along with supply

and lowering of pipes with labour and material)

Sr. Description

Qty Unit Rate /Unit Amount Rs.

Drilling and Reaming of 300/250 mm dia. Pilot bore by

1 using bentonite poweder from 0.00 to 300 mtrs. & 450mm 300 Rmt. 859.06

2 charges for Electro logging for tubwell 1 Job 14,463.86

Charges for mud cutting disposabal by tanker day to day

from site without staging at site and water tankers

4 Supply of Cement 1 M Ton 5,975.47

5 Labour charges for Cement Sealing. 1 Job 12,585.28

6 Supply of Grawell of selected size 4.75mm to 8.00mm 17 Cmt. 1,923.87

7 Supply of Clay Balls having size of 25mm to 50mm 8 Cmt. 712.09

Lowering of 90mm dia drop line to Devlop each water

bering Zone came across upto the depth of tubwell (size

200/250/300 mm dia depth more than 186mt.) for

devlopment of tubwell by Air compressor.

1100 CFM/300 PSI (300 mtr depth) Air Compressor

9 should run minimum for six hrs or upto availabilty of sand 1 LS 29,916.22

150mm M.S. ERW pipes having min 5.4 mm wall

thickness with square edge finish conforming to IS

1239:2001 and ISI marked With Chaopplas made from

steel bent plates of 125mm x 100mm x6mm size

150 mm M.S. ERW continuous 1/16 mm slotted

filteration strainer pipe having (Heavy) min 5.4mm wall

11 thickness with square edge finish conforming to IS 1239 54 Rmt. 2,228.24

and ISI marked With Chaopplas made from steel bent

plates of 125mm x 100mm x6mm size

MS bail plug 150mm dia X 5.4mm min thickness X

Mtr Length with welded cone at the bottom with 1/16mm

slots in 3mtr Length of bail plug @ the bottom.

Well cape having 100mm hight made from MS plate with

3 Holes @ equal distence on circumference for nut bolts

type locking arrengment with nut bolts & lock nuts of

standerd make etc. complete (a) For 150mm ERW pipes (

Thickness of plate is minimum 06mm )

Clamp made from M.S. plate with 3 holes on each side

with nuts & bolts of standerad make and suitable to

14 150mm dia pipe. size 150mm Dia X 100mm X 20mm. 1 No 1,048.76

Total cost for (Part- A) including GST Rs.

PART-B (SITC of electrical and mechanical equipments along with accessories for 01 No. borewell )

Description Qty Unit Rate/Unit Amount Rs.

Supplying, Testing and commissioning of Submersible

pump having discharging capacity of 15 m3/Hr. at

Mts. Head 15 HP in standard materials with 02 yrs.

Supply of 2" dia. Heavy duty UPVC Column pipe of

2 Minimum thickness 19 mm & length 3 Mtr with tolerance 150 Mtr. 583.85

Supply Of Outdoor type IP-55 Double Door type Section

3 piller Water Resistant for Pump panel 1 No 35,758.79

Size:1000mmWx1525mmHx800mmD

Supply of ISI armoured Aluminium cable 35 Sq.mm x

5 Supply of ISI Flate copper cable 4 Sq.mm x 3 Core 320 Mtr. 173.88

6 S.I.T.C.of MCCB 63 A - 4P 1 No 6,192.70

S.I.T.C.of ELCB/RCCB MCCB 63 A - 4P, Breaking

Capacity 30/100 mA as per instruction

Supply of Star-Delta panel for 15 HP submersible pump-

set inclusive of main switch MCB, A-meter, V-meter,

contactors, Over Load relay, SPP, Main and Control fuse,

Push buttons with indicating lamps,ELR, capacitor, cable

box, cable gland, lighting board, earthing of the section

pillar,switch unit & starter should be done by 1"x1/8" MS

galvanized earthing strip,Two nos of earthing terminal

shall be provided for connecting the earth, All non-current

carrying metallic parts of the equipments shall be earthed.

Earth bus of 10x3 mm shall be provided through out of

the earth bus of 10x3 mm shall be provided out of the

earth lock as per tender specifications and BOQ

Top Bottom Piece set suitable with pump outlet and 2"

9 uPVC column pipe. 1 set 4,362.44

GI-Pipe fittings like Coupling, Tee, Bend-02 nos, Blind

10 Plug, Hex Nipple, GI pipe-2", GM Ball / Gate valve (ISI), 1 Lot 7,778.62

GM NRV (ISI) suitable for 2" uPVC column pipe

Earthing for Panels

11 Either Earthing Pit or • PIPE-IN-PIPE Technology Safe 1 Lot 7,107.83

earthing mentioned in Volume -I

Liasoning work with UGVCL/TP

Labour charges for Delivery at site with Transportation,

loading -Unloading and Installation Testing and

commissioning charges of all Electrical and Mechanical

Total cost for (Part- B) including GST Rs.

Total Amount for one no. borewell including GST (Part -A+ Part-B) Rs.

Total Amount for one no. borewell including GST (Part -A+ Part-B) Rs.

Total amount for 15 Nos. of borewell Rs.

Total amount for 15 Nos. of borewell Rs.

PERCENTAGE (%) ABOVE / BELOW OF Rs.2,21,42,703/-