Repair of Head regulator of Kokri disty at RD 124456/R of Abohar branch canal.

Amount

Dismantling brick work tile, masonry or tile lining in cement.

Dismantling Reinforced Cement Concrete.

Dismantling Cement Concrete 1:4:8.

Filling stones into crates and hand packing i/c supplying and carrying stones from quarry complete in all respect.

Weaving wire netting for wire crates including binding sides and partitions to make crates of 6"x6" mesh

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil.

Preparing watering and ramming surface for laying concrete, for irrigation channels horizontally.

Cement concrete (M-10) with stone ballast mixing by mech. Means using concrete mixer volumetric type.

Back filling with Sandy material behind abutment, wing wall and return wall complete as per drawing and Technical Specifications.

Supplying & laying dry brick ballast.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. For PCC M-15 Grade using concrete mixer i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-30 grade, Using concrete mixer, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-20 grade, Using concrete mixer, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications for RCC M-25 grade, Using concrete mixer, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth.

Centring and shuttering for faces of walls, partitions, retaining walls and the like (vertical and bartering including attached pillasters buttresses etc). Complete in all respect.

Extra for laying earth/ fly ash as per specification for compaction in 20 cm layers, dressing, watering & rolling to specifictions. Complete as all respects.

Re-handling of Earthwork with lead 30 meters

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Cement concrete lining 10cm thick or less (75mm) with mechanical Paver for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km. Concrete lining to be done on bed and on slide slopes upto vertical height 2.0m.

Providing and laying cement concrete M-15 for Sleeper mixed in automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect in PWD specifications

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. For PCC M-20 Grade using concrete mixer i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Furnishing and Placing Reinforced cement concrete in super- structure as per drawing and Technical Specification for RCC M-40 grade for anti crash barrier, Using concrete mixer, i/c shuttering and vibrating etc but excluding steel reinforcement complete in all respect.

Providing and filling joint sealing compound with coarse sand and 6 percent bitumen by weight complete as per drawings and technical clause 2605 of MORT&H specifications.

Providing & fixing 25 mm thick and 250 mm wide compressible fiber board in expansion joint complete as per drawing and technical clause 2605 of MORT&H specifications.

Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 500 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including bending and binding placing in position complete

Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and applying paint @ of 1 litre for 2 sqm.

Supplying Direction/Diversion Plate 900x300 mm rectangular with high intensity microprismatic grade retro reflective sheeting Type IV.

Labour for First class burnt brick work laid in cement mortar 1:3 in foundation and plinth.

Providing and fixing drainage spout complete as per drawing and Technical specification.

Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lens or lass Beeds capable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values shall be as given in the detailed specifications and the product shall conform to ASTM D4280.

Cautionary sign board 900x900x900mm triangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and as per IRC 67 2012 as per CSR 24.44 (ai)

Definition Plate 600x200mm rectangular as per as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012.

Mandatory sign board 900mm circular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 – 09 and as per IRC 67 – 2012.

Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting as per ASTM D 4956 09 and IRC 67 2012,

Providing and fixing of Standard Metal Delineator as per IRC 79:2019 consisting of retro reflective area in white color using full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC 67 2012

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Providing 12 watt LED Light with Solar Pannel and Battery.

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Painting two coats with anticorrosive bitumastic Paint to give an even shade with special quality paint.

Painting two or more coats excluding priming coat with ready mixed paint for metallic surfaces in all shades on steel or iron work.

Any other Item

SATPAL CONTRACTOR (BID ID -607075)