CA NO CWE BLY/GE (W)/17 OF 2023-24 SPECIAL REPAIRS /REPLACEMENT OF 2 POLE/4 POLE INTO RMU OF LOKHART LINE FEEDER UNDER GE (WEST) BAREILLY

Amount

Supply ,installation, testing and commissioning of 11 KV SCADA Compatible of 11 KV 630 Amps 21 kA for 3 second of SF 6 insulated ring main unit (RMU) 4 Way consist of motorised 3 load break switch and 01 (one) No. VCB suitable size replaceble bushing complete all as specified and as directed.

Supply ,installation, testing and commissioning of 11 KV SCADA Compatible of 11 KV 630 Amps 21 kA for 3 second of SF 6 insulated ring main unit (RMU) 3 Way consist of motorised 2 load break switch and 01 ( one) No VCB suitable size replaceble bushing complete all as specified and as directed.

M&L for dismentling of 4/2 pole HT structure from ground lavel including openning of existing cable connection from GOD /Jumper ,opening of insulater ,LA,Angle iron fram complete with making good of disturebd surface.and connecting the HT cable with RMUcomplete all as specified and as directed.

M&L for foundation for RMU with fly ask bricks Masonary work including plastering white wash of the same upto 0.60 mtr from ground level incl provn of a step infront of RMU on openable side with fly ask brick masonary in CM 1:6 and plastering 10 mm thick in CM 1:6 and three coats of white wash including preparation of surface up to height of RMU bottom , width 0.45 cm and length equal to the RMU widh for operating of RMU and surrounding area fenced with chain link fencing duly supported with MS work ie angle iron 50x50x6 mm and braced with flate iron 25x6mm incl provn of opening gate including 01 no 300mm MS sliding bolt, 2 Nos 100mm MS hinges welded with angle iron frame with same material with locking arrangement and brick work with plastering and white wash around the fencing with height 0.30 cm from GL and height of fence should be up to RMU height including necessary excavation & earth work in soft/loose soil, two coats of synthetic enamel paint over a coat of red oxide primer and 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregates) as in foundation complete a all as specified and directed.

M&L for earthing in replacement of old , complete with steel earth plate electrode of size 60cm x60cmx6mm thick burried directly in ground vertically ( to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to strip 32x 6 mm size with nuts, bolts , check nuts , washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wiremesh all as shown in electrical plate No. 3 of SSR -2009 Part I and connecting to arthing test point,main switch board and testing on completion including PCC chamber concrete 1:3:6 type C-2 and RCC cover 75mm thick with MS TMT bar 8mm dia @ 150mm c/c both ways in cement concrete(1:2:4) type B-1 all asshown in electrical plate in No 3 of SSR(Pt-I) 2009 complete.

Supply, fixing, testing and commissioning in replacement of heat shrink end jointing kit suitable for HT cable of size up to 120 Sqmm, XLPE insulated, PVC sheathed armoured 11000 volts grade complete all as specified and as directed.

Note : Tenderers may note that amount of credit Rs 1,29,943.00 will be deducted from the total amount arrived, at the time of Acceptance of contract.

M/s. S.S. Refrigeration, Bareilly

Diamond Electric Co.