Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹19.5 LAccepted-AOC SCO 1 SECTOR 5 MANSA DEVI COMPLEX PANCHKULA HARYANA | PANCHKULA | HARYANA | 133301 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹21.7 L+₹1.7 L (8.40%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹22.5 L+₹2.5 L (12.7%)Rejected-Finance H NO 4 ANAND VIHAR KANSAPUR ROAD YAMUNA NAGAR HARYANA | YAMUNANAGAR | HARYANA | 133103 | L3 | Rejected-Finance Being L3 |
Tender Value
₹22.5 L
EMD Value
₹45,000
Closing Date
1 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I R AND D Chandigarh
Garrison Engineer I R and D, DIHAR Base Lab, Ground Floor, Near 3 (BRD) AF Stn, Industrial Area, Ph-II, Ramdarbar, Chandigarh
CERTAIN REPAIRS TO ROOFS AND OTHER ALLIED WORKS IN ZONE-I, ETF, AAG GUN GROUP AND DOMESTIC AREA AT TBRL RANGE RAMGARH
2023_MES_601458_2
GE I R AND D /CHD-38/2023-24
Open Tender
Civil Works
Item Rate
180 days
Ramgarh
As per tender documents
8 documents required · 8 mandatory
₹500
GE I R AND D Chandigarh
₹45,000
Yes
30 Dec 2023
12 Oct 2023
4 Nov 2023
12 Oct 2023
1 Nov 2023
13 Oct 2023
Amount
Disconnecting existing tanks, setting a side (or lowering if required) for repairs, cleaning etc and hoisting if required reconennecting and re-fixing in positing exc 250 Ltrs to 500 Ltrs complete all as specified and directed.
All as per serial item no 1.00 above but 500 Ltrs to 1000 Ltrs
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 15 mm dia bore complete all as specified and directed.
Fixing only in steel tubing and connection 15 mm dia bore.
Supply and fixing for GI tubing 15mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Taking up or down steel tubing and connection including cleaning for refixing or removed to store, 20 mm dia bore complete all as specified and directed.
Fixing only in steel tubing and connection 20 mm dia bore complete all as specified and directed.
Supply and fixing for GI tubing 20 mm bore medium grade with all fittings and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.
Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removing to store complete all as specified and directed.
Supply and fixing for Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.
Supply and fixing for rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 ltrs.20 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms) complete all as specified and directed.
Cutting chases, pinning in making good to facing on brick walls where required and pointing in cement mortar (1:3) to ends for concealed water tubing and making good, cutting n. exc. 10cm girth. complete all as specified and directed.
Dismantling of brick tiles or terracing tiles or any other roof treatment, single layer on roof & stacking serviceable tiles for use and disposal of unserviceable material off MOD premises complete all as specified and directed.
Demolition of mud in roofs , any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.
Taking down existing water proofing treatment and cheisling the existing bituminous coating and disposing rubbish off the premises to a distance exeeding 150 mtr and n. exc 250 mtr complete all as specified and directed.
Roughening surfaces of old concrete floor etc by picking, sweeping clean and washing down with water to remove dust, etc. complete all as specified and directed.
Material and labour for providing plain cement concrete (1:3:6) type C1 using 20mm graded crushed stone aggregate on roof surfaces as padding to receive waterproofing treatment and to the required slope including finishing the exposed surface even and fair complete all as specified and directed. (Avg thick 50mm or less) complete all as specified and directed.
Material and labour for screed bed 10 mm thick on fair faces of brick work or concrete surfaces of slab in cement mortar (1:4) and finished even and fair with using water proof compound @ 2% by weight of cement complete all as specified and directed. Note: Water proofing compound shall be measured and paid for separately
Material and labour for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm including cleaning of surfaces complete all as specified and directed.
Material and labour for APP based polymeric membrane minimum weight 3Kg/Sqm and minimum 3mm thick reinforced with polyster non wove fabric (weight not less than 150gm/Sqm) laid on primed surfaces by forced application complete all as specified and directed.
Material and labour for 40mm thick brick tiles laid on mud mortar and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement on mud phuska complete all as specified and directed.
All as per serial item No 20.00 above but except brick tiles
Material and labour for flush pointing in cement mortar (1:3) to brick work or brick tiles laid in floors or surface channels, roof etc complete all as specified and directed.
Material and labour for roof cleaning by cutting or uprooting grass, vegetation and small plants etc from the roof/wall, including making good cement plaster/concrete surface as specified and directed and removing rubbish off the premises, cleaning the surface complete all as specified and directed.
Material and labour for Cleaning and preparation of roof/wall (RCC/BRICK/tiles/Cement concrete) surface and made free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated. Thereafter, inspection for cracks on the surface caused by thermal expansion/ contraction and repairing the cracks on the surface caused by thermal machine, filled with Repair Mortar/General purpose Grout in the proportions as recommended by manufacturer, supplying and applying High performance Hybrid Polyurea waterproofing coating spray/hand applied liquid membrane with following specifications: (a) Elongation of range more than 450%. (b) Tensile strength more than 1.5 N/mm2. (c) Crack bridging ability of 3.00-4.00mm. (d) The application shall include final base preparation, epoxy primer application in rato 1.1 (resin: hardner) with 100% water dilution and application of Hybrid polyurea in two coats in 6 hrs interval to achieve total min thickness 1 to 1.50mm. The application/ treatment shall be carried out by authorized rep of approved specialist firm/manufacturer. Note:- The defect liability period of water proofing treatment to RCC roof slab including sunken floor shall be 10 years and the contractor shall be responsible to keep the entire building(s) free From leakage/seepage for a period of 10 years after certified date of completion. The contractor may obtain a similar guarantee from the specialist firm engaged by him for the purpose.
Material and labour for Cleaning the surface and making free of dirt, foreign particles, laitance followed by grinding all protrusions to make surface modulated, thereafter, inspection for cracks on the surface caused by thermal expansion, contraction. Cutting the grooves with suitable cutter machine in "v" groove filled with Repair mortar/micro concrete/General purpose grout as recommended proportionally as per recommendation of manufacturer. Making of Gollas at all the corners with Polymer modified mortar(1:4 Cement: sand with acrylic polymer 3.5% by weight of cement) complete all as specified and directed.
Material and labour for Waterproofing expansion joint by Providing and applying Thermoplastic Elastomer tape 200mm wide 1mm thick, a modified flexible TPE based root resistant membrance with chemical resistant. The tape system must be tensile strength >5N/mm2 according to ASTM D412; tear strength > 25N/mm according to ASTM D 624; elongation > 400% according to ASTM D 412; chemically resistant to several chemicals; passes low tempreature foldability at -40◦C according to ASTM C 1305; passes artificial weathering according to ASTM G 154. The tape must be capable of servicing a wide range of temperature of -40◦C to +80◦C. The tape, adhesive and repair mortar must by provided by same manufactuerer for full compatibility. The same is applied using epoxy adhesive of layer 2mm to prepared substateon both sides of joint and both ends of the tape embeded into the adhsive on a width of 38mm complete all as specified and directed.
Taking down cement plaster of any description from brick wall surfaces etc including racking out joints and hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for internal plastering 10 mm thick on fair faces of brick or concrete surfaces, in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and directed .
Material and labour for external plastering 15mm thick on fair faces of concrete surfaces in CM (1:4) using WPC @ 3% by weight of cement. Note : WPC shall be measured and paid separately.
Supply only liquid water proofing compound
Material and labour for rendering 5 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for applying two coats of cement base paint on walls including preparation of new plastered surfaces complete all as specified and directed .
Material and labour for applying one coat of cement base paint on wall surfaces including preparation of old wall surfaces complete all as specified and directed .
Material and labour for two coats of oil bound distemper over a coat alkali resistant priming paint on walls including preparation of new surfaces complete all as specified and directed .
Material and labour for one coat of oil bound distemper on walls including preparation of old surfaces complete all as specified and directed .
Material and labour for applying two coats of white wash on ceiling including preparation of new surfaces complete all as specified and directed .
Material and labour for applying one coat of white wash on ceiling including preparation of old surfaces complete all as specified and directed .
Demolition of brick / block masonry built in CM including all quoins, arches, pillars etc and clearing rubbish off the premises. complete all as specified and directed .
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above GL. complete all as specified and directed .
Material and labour for brick work with subclass B bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as speecified and directed
All as per serial item no 39.00 above but except brick complete all as specified and directed .
Material and labour cement concrete tiles 20cmx20cmx20mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut to polished laid on 15mm thick cement mortar 1:4 screed bed or bedding layer and tiles set in cement slurry with grey cement using WPC as directed by engr-in-charge. (WPC will be paid seprately) complete all as specified and directed .
Demolition of RCC of any description and in any postion not otherwise specifically provided for etc complete all as specified and directed .
Material and labour form work for flat rough finished surface to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed .
Material and labour RCC 1:2:4 type B0 (using 12.5mm graded aggregate ) as in chajjas etc complete all as specified and directed .
Material and labour for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .Fe-410-W (Gde.E-250) Part- I quality-A or Fe 290 (Gde -E-165) etc complete all as specified and directed .
Material and labour for Mild steel bars 8mm dia cut to length bent to shape required, including cranking, bending, spirally for hooping for colums, hooking ends and binding with and including mild steel wire not less than 0.9mm dia complete all as specified and directed .
Supply and fixing for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 etc complete all as specified and directed .
Dismantiling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed .
Material and labour for PCC type C-2 1:3:6 (40 mm graded aggregate) as in foundation, filling and mass-concrete and like filling in fencing post complete all as specified and directed .
Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .
Supply and fixing for Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed .
Dismantling of wrought iron or MS work of any description complete all as specified and directed .
Material and labour for roof trusses framed trussed pulins crance rails and fastening and heavey brackets framing ( Beam tee, angle, square, rectangular hollow sections or flat sections indl distance pieces, cleats etc Fe-410W (Gde E 250) complete all as specified and directed .
Material and labour for preparation of new untreated surfaces of steel of any description exc 10cm width or girth not other wise described and applying two coats of synthetic enamel paint over one coat of red oxide primer. complete all as specified and directed .
Supply and fixing in repairsPVC (SWR) 110 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed .
Supply and fixing in repair PVC (SWR) 100 mm bore of bends any radius complete all as specified and directed .
Supply and fixing in repairsPVC (SWR) 75 mm bore of pipes double socketed in any length with rubber ring joints fixed to walls complete all as specified and directed .
Supply and fixing in repair PVC (SWR) 75 mm bore of bends any radius complete all as specified and directed .
Material and labour for applying two coat of PU based tile weather coat with a coverage of 5 Sqm/ Ltr after removing vegetation, shurb with wire brush to remove alage and throughly pressure washing the surface tile. The cleaned surface to be primed by thinning of tile coat with 1 ltr of water and to be applied by manufacturer guideline and complete all as specified and directed .
Chipping of unsound/weak concrete material 25 mm avg thickness from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts complete all as specified and directed .
Cleaning of reinforcement from rust from the reinforcing bars upto 12 mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed .
Cleaning of reinforcement from rust from the reinforcing bars above 12 mm to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, complete all as specified and directed .
Material and labour for preparation of new surface of APP membrane and applying one coat of aluminium paint complete all as specified and directed .
Providing, mixing and applying bonding coat of SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer approved adhesive on chipped portion of RCC complete all as specified and directed .
Om Sai Ram Builders
RAJESH KUMAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .