REPAIR TO APRONS, MT WASHING AREA HARDSTANDINGS, PATH NEAR MEGAZINES AND FIRING RANGES OF CERTAIN UNITS AT DIFFERENT LOCATIONS UNDER GE (NORTH) BINNAGURI

Amount

Demolition of brick work built in cement mortar etc complete all as specified and as directed.

M&L for brick work with fly ash bricks old size straight or curved on plain exc mean radius built in cement mortar 1:6 complete all as specified and as directed.

All as per item Ser No. 2 here in before but except bricks complete all as specified and as directed. Note: The serviceable bricks obtained from demolition shall be reused.

Taking down cement plaster on brick work of any description including racking out joints and cleaning dust etc including removing rubbish material complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar 1:6 on fair faces of brick work or concrete surface finished fair and even (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly wall plastered surfaces and applying three coats of white wash/colour wash on wall complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for complete all as specified and as directed.

M&L for RCC slab(1:2:4) type B-1 with using 20 mm graded stone aggregates complete all as specified and as directed. Note : Reinforcement shall be measured and paid separately under relevant item of this Schedule ‘A’.

S&F mild steel Thermo mechanically treated (TMT) bars 8/10 mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, hooking end and binding with and including mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and as directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in path /steps laid with and including use and waste of form work and finishing the surface even and rough to receive the topping layer or tiling complete all as specified and as directed.

M&L for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.

M&L for pre-polished and chemically treated smooth finish exterior grade coloured chequered tile for size 300 mm x 300 mm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed or bedding layer in cement mortar (1:6) as in path complete all as specified and as directed.

M&L for providing and laying of 300x300 mmx 10mm thick anti-skid pavement tiles in approved color & Shade and in anti skid finish set and jointed in neat cement slurry and pointed in white cement & pigment to match over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. Note: Design/pattern shall be as approved by GE at the time of execution.

M & L for PCC 1:2:4 Type B1 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete all as specified and as directed.

M&L for forming 12 mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘B’ complete all as specified and as directed.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade ‘B’ complete all as specified and as directed.

M&L for 100 mm thick PCC 1:3:6 type C2 (with using 40mm graded stone aggregate) as in floor and paving complete all as specified and as directed.

M&L for PCC 1:3:6 type C2 (with using 40mm graded stone aggregate) as in saucer drain, storm water drain, bed of drain etc like water through including forming channels complete all as specified and as directed.

S K GUHA (BID ID -3243800)

MESSRS SEN BROTHERS (BID ID -3248560)

SHRI MANOIRANJAN BISWAS (BID ID -3243826)

M/S PLABAN KUMAR GOPE (BID ID -3248517)

L. B. SHARMA (BID ID -3243916)