Replacement of Old conventional HPSV 250 watt BFL fitting with 150 watt Non Integral type LED Flood light fittings in AOR of BOP Rann of 123 BN BSF under SHQ BSF Gandhinagar

Amount

Supply, Installation , testing and commissioning of set of 3 luminairies with combined wattage 450 watt (Variation of more than +/- 5% would not be allowed) outdoor type LED flood light luminaire having minimum efficency 120 Lumen/ watt outdoor type Non integral LED luminaire light should be of toughened glass & heat sink should be die cast aluminium along with heat sink fins to dissipated heat effectively with adjustable mounting brackets on pole , IP66 & above ,input operation voltage range & frequency 120 to 270 Volt AC at 50 Hz +/- 2Hz , Rated voltage 240 volt AC 50 Hz , PF not less than 0.95, operating teperature range -10 deg C to +45 deg C, working life of LED is minimum 50,000 hrs burninh hrs , surge protection 5KV Internal &10KV External , CCT 3000+/-500 K , with Gears of Electronic constant current potted driver with >85% , efficiency, IP67, Short & Open circuit Protection, No Load, Overload EMI Envoirmental equivalent & Phase to phase protection 320V for 48Hrs & 350V for 24Hrs & all accessories etc as per specification etc . LED light suitable for mounting on the existing pole bracket & drilling of holes as required, making connection with 3 X 1.5 sqmm FRLS grade PVC insulated copper conductor cable from loop box to fitting i/c providing and fixing suitabe size of flexible pipe / insulaiton sleave with accessories from top slot of pole to fitting connections, interconnection and dismentling of existing (3 Nos HPSV) fitting & other accessories i/c deposite at BOP Rann etc.as per specification complete required

Fabrication, supplying, installation,and. testing of totally enclosed outdoor type front openable weather proof/ vermin control gear box size 550 mm x 550 mm x 300 mm (Deep) and locking arrangement of box with latch. It shall be fabricated from 1.6 mm thick CRCA sheet complete having 4 nos. 63 Amp capacity aluminium bus bar ,03 nos slide compartment for installation of LED gears/driver set, one 10A TPN and 3 nos.1 Amp SP MCB "C" rating inter-connection ,earthing testing and commissioning and required quality blanking holes suitable for 4C X 35sqmm PVC / XLPE UG cable &bolts and dismentle of existing CG box etc as required .

Supplying and drawing 3 Nos , 1.5 sqmm three core FRLS PVC insulated copper conductor cable in the existing surface/ recessed steel/ PVC conduit as required

Earthing with G.I. earthing Electrodes 2 metre long, 25 mm dia including accessories, and providing connection with GI/MS pole by existing 25mm X 6 mm GI strip as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.A)63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed I XLPE aluminium conductor cable of 1.1 kV grade as required. Make- Jainsons/VIB/ Dowells 3.5 x 35 sqmm

Supplying and laying/drawing of 3.5 X 35 Sqmm one number PVC insulated and PVC sheathed / XLPE armoured Aluminium cable of 1.1 KV grade of following size direct in HUME/ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering etc. as required.

KRUTARTH ENGINEERING PRIVATE LIMITED

M/s Nadeshvari Electricals

Prakash Electricals