PROVISION OF CONSTRUCTION OF 08 NOS NEW SHOPS IN EXISTING SHOPPING COMPLEX AT CGRA CG DHQ6 MALAKAPURAM VISAKAHAPATNAM UNDER GE I CG VIZAG

Surface excavation n exc 30 cm deep & avg 15 cm and getting out in hard / dense soil complete all as directed.

Excavating over areas n exc 1.5m in depth; in hard / dense soil and getting out complete all as specified and directed.

M & L for plain cement concrete 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hard core of broken stone or boulder, gauge n exc 63mm deposited spread and leveled in layers n exc 15cm thick watered and rammed to a true surfaces complete all as specified and directed.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F TMT bars 5 mm to 10mm dia as in stirrups / spacers / binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in foundation, footing, mass concrete, foundation beam, plinth beam and base for column complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in slab supported on wall ,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC M-30 (Design Mix) (20mm graded aggregates) as in chajja complete all as specified and directed.

Use & waste for flat formwork to sides of concrete foundations, footings, bases of columns raft and raft beams, sides and soffits if any of foundations and plinth beams and similar work, etc, rough finished surfaces of concrete etc all as specified and directed

Use & waste for flat form work to sides of pillars, posts struts, piers columns and stanchions, square, rectangular or polygonal rough finished surfaces of concrete etc all as specified and directed

Use & waste for flat formwork to sides of concrete beams, cantilevers, bressummers, lintels over 1.5m span and similar work, etc, rough finished surfaces of concrete etc all as specified and directed

Use & waste for flat formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) flat surface, rough finished surfaces of concrete etc complete all as specified and directed

Use & waste for flat formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed

Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed.

Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed.

M & L for full or more brick thick Brick work with AAC bricks of size 600 x 200 x 200mm, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 using old size brick complete all as specified and directed.

M & L for rendering 10 mm thick cement plastering on wall surfaces in cement mortar 1:6 on other than fair face of brick-work or concrete surface and finishing the surface even and fair without using extra cement complete all as specified and directed.

M & L for rendering 15 mm thick cement plastering on wall surfaces in two layers (10mm+5mm each) on fair faces of brick work or concrete surfaces in cement mortar 1:4, mixed with liquid water proofing compound in top layer as per manufacturer's instructions and finished the surface even and fair without using extra cement complete all as specified and directed. (Note : WPC shall be measured and paid separately against respective item).

M&L for rendering 5 mm thick cement plastering on ceiling surfaces in cement mortar 1:3 on concrete surface, finished the surface even and fair without using extra cement complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of plastic emulsion paint of any colour as approved by GE over a coat of primer over two mm thick wall care putty as recommended by the manufacturer complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ).

M&L for preparing new plastered surfaces in ceiling and applying two coats of plastic emulsion paint of any colour as approved by GE over a coat of primer over two mm thick wall care putty as recommended by the manufacturer complete all as specified and directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ).

M&L for preparing new plastered surfaces of walls and applying Two or more coats of 100% Premium acrylic exterior emulsion paint having VOC less than 50 m/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including one priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces as recommended by the manufacturer all as specified and as directed (Note : Rate shall be included for necessary scaffolding and safety measures where required at site ).

S&F factory made uPVC white / colour sliding window, area not exceeding 2.00 sqm each, three track made of extruded profiles with wall thickness of 2.3mm (+0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners including necessary Hardware like Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories complete all as specified and directed. (Note: (i) The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. (ii) Net Opening will be measured lor payment purpose.)

S & F 5.50 mm thick, sheet glass, ordinary quality and glazing with oil putty in square n.exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S & F mild steel frame work such as grills, grating framed guard bar with ends of bars shouldered and / or riveted and similar work confirming to Fe- 410-0 or Fe-310-0 complete all as specified and directed.

M & L for cleaning of surface thoroughly from dust & dirt and cement slurry @ 3 Kg / Sqm shall be applied thoroughly. Provide 15 mm thick screed bed in CM 1:3 mixed with integral water proofing compound as per manufacturer's instructions, after setting and drying cement mortar, the entire surface of the roof slab shall be cleaned thoroughly to remove all loose particle / dust / dirt particle and applying a coat of hot blown grade bitumen primer grade 85 / 25 @ 1.20 Kg Par Sqm shall be applied over priming surface. APP based polymeric membrane of minimum weight 3 Kg/Sqm and a minimum 3mm thick reinforced with polyester non woven fabric (weight not less than 150gms/Sqm) shall be laid on roof and on vertical surface upto and insert in grooves and packed in CM (1:3) with overlaps in membrane 100mm, The over laps shall be sealed by flames or as per manufacturer's instructions. and finally it will be finished with two coats of bituminous based aluminium paint including taking down of existing roof treatment, properly cleaning & drying the concrete surfaces complete all as specified and directed. (Note: Integral water proofing compound shall be measured and paid separately in Supply only item.)

M&L for treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed.

M&L for treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed.

M&L for treating along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for treating the top surface of filled earth at the rate of 5 litres of emulsion per squaremetre of surface complete all as specified and directed.

M & L for virified ceramic tiles, double charged, light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

M&L for glazed ceramic colour tiles in vertical surface of size 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface with and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M & L for 25 mm thick, plain cement concrete 1:2:4, type B-0 (using 12.5 mm graded stone aggregate) as in sub base of floor finished the surface even and rough to receive the next layer complete all as specified and directed.

M&L for 18 to 20 mm thick granite (jet black colour) tiles machine cut as in floors jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing with and including screed bed or bedding layer of mortar 15 mm thick in Cement Mortar 1:6 complete all as specified and as directed.

M & L for 75 mm thick, plain cement concrete 1:3:6, type C-1 (using 20mm graded stone aggregate) as in plinth protection etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 including necessary formwork complete all as specified and directed.

S&F solid PVC wall lining consisting of 5.00 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as shown in skatch on serial page No. 182 of SSR 2020 Part-II complete all as specified and directed.

Supply and fixing Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. with hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructionscomplete all as specified and directed.

S&F Steel rolling shutters with thickness of laths of 1.25mm, gear operated type with bevel gear box and crank handle , ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters with standard specification complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrom primer, complete all as specified and directed.

Supply and fixing in repairs 18/19mm WPC (wood plastic composite) boards for cabinets with partitions, sliding/openable shutters, cupboard boxes including frame work fixed with channels/screws/rawl plugs to timber work/ brick/ stone/ concrete wall covered with 1 mm thick decorative PVC laminates, "Mica" type 1 of exposed surface finished , colour and pattern as approved fixed with approved adhesive as per manufacturer’s instructions complete all as specified & directed including polish finish, with Kitchen Concealed/auto hinges, magnetic catchers, locks, SS handles complete with all hardware used as per site requirement complete all as specified and directed. Note :- Unit rate quoted to be deemed to include for cost of all material & labour and no other item shall be measured and paid separately.

Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumifion based fluoropolymer resin coating of approved colour and shade on one face and polymer (Service) coating on other face as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5/MS with hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics complete all as specified and directed. (Note: (i) Actual area on the external face of the curtain wall with aluminium composite panel cladding shall be measured for payment purpose)

All as per item No 48 here-in-before but 5/6 Amps socket Point on same board.

All as per item No 48 here-in-before but 5/6 Amps socket Point on independent board.

All as per item No 48 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and as directed.

S&F modular switch 6 Amp, 1 way, 1 module size complete all as specified and directed.

S&F modular switch 16 Amp, 1 way, 1 module size complete all as specified and directed.

S&F Modular socket 6 Amp, 2/3 pin, 2 module size complete all as specified and directed.

S&F modular socket 6A/16 Amp 2/3 pin combined 2 module size complete all as specified and directed.

S&F ceiling modular fan regulator 120 W 2 module size complete all as specified and directed.

S&F ceiling rose surface Polycarbonate/ PVC three terminal complete all as specified and directed.

S&F modular BLANK PLATE , 01 odule size complete all as specified and directed.

S&F modular metal flush box alongwith modular white cover plate including frame , 3 module complete all as specified and directed.

S&F modular metal flush box alongwith modular white cover plate including frame , 6 module complete all as specified and directed.

S&F LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light/ batten type connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED building security lights fitting 35 watt, 230 Volt, outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, bracket of 40mm dia GI pipe light grade 1.50 m long bent to shape as requirred shall be fixed with clamps, nuts, bolts etc to pole or other means, with impact and corrosion resistant including thermal management in multiple optics with IP 65 / 66 protection including connecting up with three core flexible copper conductor cable of suitable size from from existing point complete all as specified and as directed.

S&F ceiling fan of 1200 mm sweep 230 volts, 50 Hz, minimum air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) with and including blades, down rods, electronic regulator and all accessories complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F exhaust fan metal body with and including louvers shutter, of 300 mm size 230 volts, 50 Hz, 1200 RPM, copper winding including all accessories complete including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply, install, testing and commissioning of vertical type MCCB DB, double door, V-TPN 12 way, with MCCB as incommer with and including incomming and outgoing cable with lugs and connection complete all as specified and as directed.

S&F double door metallic sheet metal enclosure for DBs when MCB to be used, SPN, 4 ways 240 Volts (horizontal type) fixed properly on in concealed position and to provide required size of flexible conduit at any open surface near DBs for cable / wires complete all as specified and as directed.

S&F MCCB 4 pole, 415 Volt, adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and as directed.

S&F MCB 6-32 Amps, SPN, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F MCB 6 to 32 Amps, SP, 240 Volt "C" series, breaking capacity 10 KA complete all as specified and as directed.

S&F electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage and KWH complete all as specified and directed.

Supply, laying and testing of XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50.00 sq mm 3.5 core shall be laid under trench or pipe or loop or shall be fixed on wall / pole including taking out old unserviceable cable complete all as specified and directed. (Note: Earthwork , excavation, sand coushioning, GI pipe etc. shall be measured and paid separately uinder relevant item)

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, in cable tench etc. n exc 10 sqm on plan and getting out soft / loose soil complete all as directed.

Returning, filling in incl spreading, leveling, watering and well ramming in layers n exc 25 cm complete all as specified & directed.

Removing excavated material to a distance n exc 50 mtr and depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified & directed.

M & L for sand cushioning under trenches as in cable protection complete all as specified and directe. (Note: Punned thickness shall measured for payment purpose)

M&L for Sub Class B bricks common burnt clay building bricks designation 75 Kg/Sqmm complete all as directed.

Supply and laying 40 MM bore dia GI tubes, light grade galvanised with all fittings laid in trenches etc for protection of cable including taking up / down old unserviceable pipe complete all as specified and directed.

Please Enable Macros to View BoQ information