Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.3 LAccepted-Finance | L1 | Accepted-Finance accept | |
| 2 | L2₹18.3 LSame as L1Accepted-Finance VILLAGE DOHAL PO PATTI TEHSIL PALAMPUR DISTRICT KANGRA | KANGRA | HIMACHAL PRADESH | 175013 | L2 | Accepted-Finance accept | |
| 3 | L3₹18.7 L+₹37,685.37 (2.06%)Accepted-Finance VILLAGE VILLAGE TEHSIL BAIJNATH DISTRICT KANGRA | MANDI | HIMACHAL PRADESH | 175013 | L3 | Accepted-Finance accept |
Tender Value
₹16.3 L
EMD Value
₹32,628
Closing Date
5 Sept 2022, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer JSV Division Thural
O/O The Executive Engineer JSV Division Thural
Additional and Alteration of IPH Inspection Hutt at Akshaina in Tehsil Palampur, Distt. Kangra HP
2022_HPIPH_64177_1
THL-KNG05-729 (12754-80 dated 27.08.2022)
Open Tender
Miscellaneous Works
Item Rate
90 days
Additional and Alteration of IPH Inspection Hutt a
Please refer Tender documents.
10 documents required · 10 mandatory
₹400
₹32,628
Yes
9 Sept 2022
27 Aug 2022
6 Sept 2022
27 Aug 2022
5 Sept 2022
27 Aug 2022
Amount
Excavation in foundations and trenches(for pipes and pits in all depths etc.) in all lifts and in all kinds of soils such as pick work, jumper work, blasting in soft/hard rock, chiseling/wedging out of rock (where blasting is prohibited)and saturated soils, stacking the excavated earth within all leads and lifts, clear from the edge of excavation and then returning the stacked soil in 15 cms. layers when required into plinths, sides of foundation and trenches etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed by Engineer-in-charge within all leads and lifts including uprooting of trees, dressing of beds and sides and preparation of sub-grade, restoration of unmetalled/metalled/paved surfaces to its original conditions including soring, strutting, timbering and dewatering , where ever required, providing diversion for traffic, fixing night signals, fixing caution boards, crossing over trenches for access to houses complete and to the entire satisfaction of the Engineer-in-charge.
Providing & laying cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth.
Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.( 50 mm dia L- C) as per the direction of the engineer in Charge.
Providing & fixing Wooden Ceiling with wooden tile of approved size and shade with adhessive of approved quility & screwd with ply board including making recesses/ hole for panal light of different size complete in all respect as per the direction of the Engineer In charge .
Providing and Laying Wooden tile of approved size ,shade and make in flooring , skirting ,treads, steps and landing with adhessive of approved quality in all leads and lifts complete inall respect as per the direction of Engineer in charge.
Providing & laying Cement Concrete in Flooring 1:2:4 (1 Cement :2Sand:4Graded stone aggregate 20 mm nominal size ) laid in one layer finished with 40 mm thick in complete in all respect as per the direction of engineer in charge.
Providing and fixing wooden moulded corner beading of triangular shape 60x4mm to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.
Grouting the joints of flooring tiles of size 800mm x 1200mm having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge
15 mm thick cement plaster in single coat on rough / fair side of brick/stone masonry for interior plastering up to floor two level i/c arisses internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even & smooth in C:M 1:6(1cement:6sand) complete in all leads and lifts as per the direction of Engineer in charge .
20 mm thick cement plaster in single coat on rough side of brick/stone masonry for exterior plastering up to floor two level i/c arisses internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even & smooth in C:M 1:6(1cement:6sand) complete in all leads and lifts as per the direction of Engineer in charge .
Polishing one coat with french polish on previously polished wood and wood based surface to give an even surface including cleaning the surface of all dirt,dust and sand papered smooth and including a coat of wood filler.
Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete.( interior grade)
Applying one coat of Acrylic primer (Spectrum or equivalent of Superior quality) on new concrete/masonry/plastred surfaces after and including preparing the surface by thoroughly brushing the surface free from mortar droppings and other foreign matters, sand papering the surface smooth complete. (exterior Grade)
Wall painting (two coats) with acrylic emulsion paint of approved brand and manufacture for interior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metling the surface as per direction of Engineer-in-charge with in all leads and lifts.
Wall painting (two coats) with apex ultima paint of approved brand and manufacture for exterior grade on undecorated concrete / stone / plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for metling the surface as per direction of Engineer-in-charge with in all leads and lifts.
Painting ( one coat excluding the priming coat ) on previously painted concrete / mosonary / plastered surface with Enamal Paint of approved brand and manufacturing for on interior grade use on floor to give an even shade , including cleaning of all dirt , dust and other foreign matter and sand papering as required .
Painting ( one coat excluding the priming coat ) on previously painted concrete / mosonary / plastered surface Exterior grade with apex ultima Emulsion of approved brand and manufacturing for use on floor to give an even shade , including cleaning of all dirt , dust and other foreign matter and sand papering as required .
Painted one coat (excluding priming coat ) on previously painted wood and wood based surfaces with readymixed paint brushing to give an even shade including cleaning off all dirt ,dust and foreign matter sand papering and stopping with ready mix paint other then white.
Painting one coat (excluding priming coat ) on previousaly painted steel and and other metel surfaces with anamel paint brushing to give an even shade including cleaning of oil, dirt ,dust and other foreign matter with ready mixed paint other then white complete in all respect with in all leads and lifts as per the direction of engineer in charge.(Window grills)
Painting ( one coat excluding the priming coat ) on previously painted concrete / mosonary / plastered surface with Enamal Paint ( white shade) of approved brand and manufacturing for on exterior grade use on floor to give an even shade , including cleaning of all dirt , dust and other foreign matter and sand papering as required .
Providing and Fixing PVC plain pipe ( Finolex /vectus make ) ISI marked 6 kg Pressure including fixing with approved fixture etc. complete as per direction of Engineer-in-charge with in all leads and lifts.
150mm PVC pipe
Providing and Fixing Greeting ( CP Jali) ISI marked.including fixing with approved fixture etc. complete as per direction of Engineer-in-charge with in all leads and lifts.
without hole
with hole
Providing and Fixing peet valve of following size complete as per direction of Engineer-in-charge with in all leads and lifts.
25 mm dia
32 mm dia
Providing and Fixing of PVC Connection complete in all respect as per the direction of engineer in charge .
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :-
Providing and fixing vitreous china partition/ Division plate for lipped front Urinal basin with approved fixture complete in all respect as per the direction of Engineer in charge.
Steel work welded in built-up-sections trusses and framed work including cutting , hoisting fixing in position and applying a priming coat of ready red lead paint, In trussed and trussed purlins( Using MS sections ie Angles,Channels etc or MS pipes ) in buildings , including carriage of materials with in all leads and lifts as per direction of Engineer-in-charge.
Providing & fixing of PVC water tank 1000 litrs capacity of standard make such as Displast/Sintex duly ISI marked with suitable cover and locking arrangement including the cost of socket and check nut 32/40 mm dia for inlet outlet, scour & cover as per the satisfaction of Engineer-in-charge.
Providing and fixing shower of required size and of approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
8 x 8 saqure over head with 24 Inch Arm
Round over head with 15 Inch Arm
Providing and laying integral cement based treatment for water proofing on horizontal surface at all height as directed by Engineer-in-Charge and consisting of Ist layer of 22 mm to 25 mm thick approved and specified rough stone slabover a 25 mm thick base of cement mortar 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound conforming to IS:2645 in the recommended proportion over the leveling course (leveling course to be paid separately). Joints sealed and grouted with cement slurry mixed with water proofing compound and 2nd layer of 25 mm thick cement mortar 1:3 (1 cement: 3 coarse sand) mixed with water proofing compound in recommended proportions Finishing top with stone aggregate of 10 mm to 12 mm nominal size spreading @ 8 cudm/sqm thoroughly embedded in the 2nd layer.
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required as per the satisfaction of Engineer-in-charge.
:Kitchen sink 18''x24"
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc complete at all levels as per direction and to the entire satisfaction of Engineer-in-charge within all leads and lifts.
Providing & fixing of Pillar tap (Mixtur type )of jaquar / approved make in all lead and lifts as per the direction of engineer in charge.
Providing & fixing wash basin (American standard)of size 55x40x15 cm complete in all respect as per the direction of engineer in charge.
Providing & fixing Looking Mirror of size 1.00 mtr x 90 cm complete in all respect as per the direction of engineer in charge.
Providing and fixing steel tower bolt of Following size of approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
Providing and fixing steel handle of required size and of approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
Providing and fixing steel handle of premium qulity and of Godrej make required size ,shade and shape of approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
Providing and fixing steel sliding door bolts of required size and approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
Providing and fixing steel door stopper of required size and approved make /ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
P/F Motice Lock with Locking arrangements and lever of required size of Godrej make & ISO certified complete with necessary screws etc in all leads and lifts as per direction of Engineer in charge .
Providing and fixing of Door Seal complete in all respect as per the direction of engineer in charge .
Providing & Supplying Foot mat of size 0.70x0.50 mtr and of required shade as per the direction of Engineer in charge.
Providing & Supplying Foot mat of size and of required shade as per the direction of Engineer in charge.foot mat large (green colour Plastic)
Providing & Supplying towel of size 1.50x0.70 mtr and of required shade as per the direction of Engineer in charge.
Providing & Supplying hand towel of required size & shade as per the direction of Engineer in charge.
Providing & Supplying quilt cover of required size & shade as per the direction of Engineer in charge.
Providing & Supplying Bedsheet white for double bed of required size & shade as per the direction of Engineer in charge.
Providing & Supplying Quilt for double Bed of required size & shade as per the direction of Engineer in charge.Quilt Double Bed
Providing & Supplying Bed side runner of size 1.50x0.60 mtr and of required shade as per the direction of Engineer in charge.
Providing & Supplying Blanket single bed of sleepwell,Monte carlo/ approved make size & shade as per the direction of Engineer in charge.
Providing & Supplying Blanket Double bed of sleepwell,Monte carlo/ approved make size & shade as per the direction of Engineer in charge.
Providing & Supplying Pillow of sleepwell/ approved make size & shade as per the direction of Engineer in charge.
Providing & Supplying of mattress protector of approved make size & shade as per the direction of Engineer in charge
Providing & Supplying Bed cover for double bed of required size & shade as per the direction of Engineer in charge.Bed cover
Providing and Fixing of wall paintings of required size with necessary screws and nuts as per direction and to the entire satisfaction of Engineer-in-charge within all leads and lifts.( 1 mtr x0.65 mtr )
Electrical Material ,Providing and fixing fancy light ball Type in all lead and Lift as per The Direcation of Engineer In charge
Boundary Lights Globe 6" with 9w LED BULB Havells make
Milky white big globe light with 9w LED BULB Havells make
Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.
Providing and fixing of Ceiling light ( Panel Type ) having size 12"x 12" including fixing with 24 watt orient, havelles / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of Ceiling light ( Panel Type ) having size 8"x 8" including fixing with 20 watt orient, havelles / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of Ceiling light ( Panel Type ) having size 6"x6" including fixing with 12 watt orient, havelles / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of Ceiling light ( Panel Type ) having size 4"x4" including fixing with 6 watt orient, havelles / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of mirror light (tube light 30 cm long ) 10 watt orient, havells / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of tube light (0.60 mtr) orient, havells, bajaj / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and fixing of spot / focus light 2watt orient, havells, bajaj / approved make with necessary screw and holder etc. complete in all respect as per the direction of engineer in charge.
Providing and Fixing Telephone Socket on existing modular box including making Connection etc. as required
Providing and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.
PVC insulated HRFR LS Copper conductor 4 Sq. mm.( 3x4.00 sqm )
PVC insulated HRFR LS Copper conductor 6 Sq. mm.( 3x6.00 sqm )
Providing and drawing Telephone cable in existing surface / recessed, Steel/PVC conduit as required.
Providing and drawing T.V. cable in existing surface / recessed, Steel/PVC conduit as required.
Providing and Fixing A.C. Socket complete in al respect on existing modular box including making Connection etc. as required
Making 18 mm thick plain cement Mortar raised band ( ornamental ) in cement mortar 1:3 ( 1 cement :3 sand )complete in alla respect as per the direction of The engineer In charge
Providing and fixing of G.I. Elbow of following dia complete in all respect as per the direction of Engineer in charge
Providing and laying waterproof anti skiding stain resistant vetrified tiles in grey /coloured or of approved shade in in walls laid on a bed of 12mm thick cement mortar 1:3(1cement :3 sand)jointed with cement slurry mixed with pigment to match the shade of tiles as required complete.
GANTANTAR THAKUR
AMIT CHOUDHARY
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .