GE AF/AMB-20/2023-24 REPAIR TO JOINERY, FLOORING, MISC B/R WORKS, PERIODICAL SERVICES AND CAMOUFLAGING PAINTING TO CERTAIN BUILDINGS AT AF STN BAKNAUR UNDER GE (AF) AMBALA

Amount

Taking down Chowkats with shutters(without taking of shutters from the frames) or frames not exceeding 1.5 Sqm each, complete all as sepcified and directed.

Taking down shutters only of any description exc 1.0 Sqm but not exceeding 2.00 sqm complete all as sepcified and directed.

Supply and fixing solid PVC door frame of size 50 mm x 47mm made out of 5mm plain PVC sheet reinforced with 19mm x 19mm M.S. Square tube profiles are mitred cut at corners and joined by insrting 2 Nos 150 mm long brackets of 15mm x 15 mm MS square tube shall 19 mm x 19 mm in square tubes and suitably screwed suppling & fixing in opening, complete all as specified and directed by Engineer-in-Charge.

Supply and fixing factory made solid panel PVC door shutter, 30mm thick (stile) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixed in the frame at site, including PVC Butt Hinges 100mm - 3 nos per leaf, PVC Tower Bolt 200mm long - 2 nos per leaf, PVC Handles 125 mm long - 2 nos per leaf and necessary fittings as required, complete as per specification and drawing complete all as specified and directed by Engineer-in-Charge.

Supply and fixing steel window (box type) factory made double shutter (glazed and wire gauzed) with side hung shutters including pintle type hinges, steel handles fabricated type for each leaf duly welded, mild steel barrel tower bolts 150mm size (02 Nos for each leaf) duly welded, including gauged and glazed Skelton shutter 30mm thick, complete with glazing bars dovetailed or welded including MS fillets, welding of 10 mm guard bars and one coat of red oxide primer and two coats of synthetic enamal paint over window, frame & guard bars complete all as specified and directed. Notes: - (i) Windows shall be fabricated as per HQ CE Chandigarh Zone drawing No. TD-219 Sh 1/3 to 3/3 dated 02 Jan 2007 with one amendment dated 22 Jun 07 in Sh 1/3 and dt 15 Jun 07 in sh 2/3 & 3/3 and these drgs may be referred from the office of GE (AF) Ambala.

M&L for hand rails, half round or other steel section, mild steel work joist, channel, angles or Tee section, fixed independently without connecting plates etc (cut to ordinary length), in window guard bars, plain, gates, cooler stand (portable/ fixed in wall etc) grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engineer-in-Charge.

Taking down Chowkats with shutters(without taking of shutters from the frames) or frames exceeding 1.5 Sqm but n.exc 4 Sqm each complete all as sepcified and directed.

Powder coated Pressed steel frames made of MS sheet of 1.20 mm thickness of size 105mmX60mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts , PCC 1:3:6 type C-0 (using 12.5mm graded aggregates) in filling inside frame & hold fasts etc complete all as sepcified and directed. Note :- Disturbed portion of existing floor /wall / tile / plaster etc during fixing of chowkhats shall be repaired to match with existing finish cost of the same will be included in this item)

Supply and fixing Pressed steel frames of size 125mmX60mm for doors with one or more rebates, 1.20mm thick mild sheet incuding necessary fixing lugs, hinges lock strike plate, etc, complete all as specified and directed.

S&F factory made flush shutters 30mm thick, 7 Ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with both faces are covered and including painting with one coat of pink primer and two coats of synthetic enamel paint and supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf, complete all as specified and directed by Engineer-in-Charge.

S&F 30mm thick glazed and skelton shutters of Ist class soft wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated including prepration of new wood surface ,applying two coats of synthetic enamel paint over a coat of pink primer all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) complete all as specified and directed by Engr-in-Charge and the supply and fixing following items:- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf.

Supply and fixing 35 mm thick, 2nd class hardwood rail and stile plain, framed, panelled shutters (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both face. The size of rail and stile as per IS :1003 (Part I), kiln seasoned and chemically pressure treated including complete all as specified and directed by Engineer-in-Charge. (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf, (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf, (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf, (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf, (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf,

Supplying and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium door and chowkhat made out of hollow extruded aluminium sections as detailed, each door having 02Nos disc or 'D' type handles, 02Nos aluminium tower bolts 200mm size, one brass mortice lock six levers with key in duplicate, fixed with aluminum hinges to chowkhat shutter, partly glazed with 5mm thick tinted glass and partly paneled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading / gasket anodized aluminium beading screws, etc. complete all as specified and as directed Section details: Chowkhat Frame: 101.60x44.45x1.5mm thick Shutter vertical/stile: 83.50x44.45x1.50mm thick Shutter middle rail: 83.50x44.45x1.5mm thick

Supply and fixing in position anodised (minimum thickness of anodising shall be 15microns) aluminium sliding window / ventilator (Bombay sliding window) and chowkhat made out of hollow extruded aluminium sections as detailed, glazed with tinted glass 4mm thick fixed with glazing clips, rubber beading /gasket anodized aluminium beading screws and lock type handles of size 75mm, 2Nos aluminium tower bolts 150mm long etc complete all as specified and as directed Section details: Shutter top & bottom: 101.60 x 44.45 x 1.5mm thick Shutter inner lock rail: 37.50x15x1.5mm thick Shutter side (handle) rail 37.50x15x1.36mm thick Chowkat bottom: 50.30x26x1.20mm thick Chowkat top & sides: 50.30x15x1.00mm thick.

Supply and fixing Butt hinges 100 mm size, medium weight, cold rolled mild steel complete all as specified and directed.

M&L for taking down of rolling shutters (area of rolling shutter not exceeding 10sqm each) and refixing same to its original position after cleaning all parts, staightening rails, etc. changing damaged / worn out strips, helical springs, etc. as required and greasing / oiling all movable parts complete all as specified and directed.

Supply and fixing 300mm long, Aluminium alloy, anodised sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

Supply and fixing 200mm long Aluminium, anodised, barrel tower bolt of extruded section complete all as specified and directed.

Supply and fixing aluminium handles, cast type, anodised 150 mm size complete all as specified and directed.

Supply and fixing galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks in repairs or galvanised wire staples complete all as specified and directed.

Supply and fixing 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane in steel/wooden/ aluminium frame complete all as specified and directed.

Supply and fixing 3 mm thick plain glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane in steel/wooden/ aluminium frame complete all as specified and directed.

Supply and fixing continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flaps when open to be 40mm. complete all as sepcified and directed.

Material and labour (fixed in repair) for 19 mm Block boards, grade 1quality, exterior grade, decorative type with decorative face veneer on one face, commercial type, fixed with screws to timber frame work, complete all as specified and directed

S&F plain fillets square, rectangular, triangular in section clean sawn secured nails or braids 2nd class soft wood having sectional area exceeding 13 Sqcm but not exceeding 25 sqcm complete all as specified and directed.

S&F in repair door closer aluminium (dia cast) body hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed complete all as specified and directed.

M/L Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, ISI marked overall length of cover plate 140 mm fixed in floor with standard aluminium screws complete all as sepcified and directed.

M/L Mild steel, 300 mm, helical door spring including roller and roller plate, ISI marked, complete all as sepcified and directed.

S&F steel ventilators with top hung shutters including hinges, steel peg stay, complete with glazing bars fixed in repair etc complete all as specified and directed.

Material and labour for preparing surfaces of new or previously untreated surfaces of steel or metal works and applying two coats of synthetic enamel paint over one coat of red oxide over 10cm in width or girth complete all as sepcified and directed.

Material and labour for preparing new or previously untreated surfaces of wood & wood based and applying two coats of synthetic enamel paint over a coat of pink primer, over 10 cm in width or girth complete all as sepcified and directed.

S&F Ball bearing for rolling shutters in repair any size suitable to existing MS pipe complete all as sepcified and directed.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of laths in 1.00 mm, including 50mm shaft pipe, spring etc, complete: push pull or manual type including taking down complete all as sepcified and directed.

S&F Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, thickness of laths in 1.00 mm, including 50mm shaft pipe, spring etc, but gear operated type with bevel gear box and crank handle complete: push pull or manual type, including taking down complete all as sepcified and directed.

Taking down cement plaster of any description on brick walls, ceiling, soffits of slabs/ chajja/ sunshaded etc including racking out joints, hacking for key, scrubbing down with water, complete all as sepcified and directed.

Demolition of brick work built in cement mortar including all quoins arches pillars etc and removing from site complete all as sepcified and directed.

M&L brick work with sub class 'B' brick (old size) straight or curved on plan exc 6m mean radius in CM (1:6) complete all as sepcified and directed.

All as per srl item No. 37.00 here-in-above but except bricks complete all as sepcified and directed.

M&L brick work as in half brick thick wall with sub class 'B' brick (old size) straight or curved on plan any radius in CM (1:4) complete all as sepcified and directed.

M&L rendering 10mm thick on fair face of brick walls or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as sepcified and directed.

M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 2% by wt of cement finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5mm thick cement plaster in CM 1:4 in the soffits of ceiling/slabs/chajjas/ sunshade etc and finishing the surface even and smooth without using extra cement complete all as sepcified and directed.

Supply only water proofing compound complete all as specified and directed.

M&L preperation of new plastered surface of walls/Ceiling/Chajja and applying Two coats of distemper oil emulsion over a coat of putty and primer (JK wall putty/Birla white) etc complete all as specified and directed by Engr-in-Charge.

M & L for preparation of new plaster/unplaster external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc including cornices and applying two coats of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint, incl border blue(apex) complete all as specified & directed by Engineer-in-Charge. Note : The rate for form work upto 15 Mtr height shall deemed to be included in total cost of this item.

M&L preperation of new plastered surface of ceilings and applying two coats of distemper oil emulsion complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as sepcified and directed.

M & L for plain Cement concrete 25mm thick, 1:2:4, type B-1, (using 20mm graded aggregates) in floor complete all as sepcified and directed.

Material and labour for 75 mm thick cement concrete type, 1:3:6, C-2, (using 40 mm graded aggregates) in plinth protection including cutting and filling constr joint with sealing compound grade A complete all as sepcified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as sepcified and directed.

Material and labour for joint free, non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm in floors, etc set and jointed in neat cement slurry and pointed in white/coloured cement to match, incuding 15mm thick screed bed in cement mortar 1:6 complete all as sepcified and directed.

Material and labour first quality, glazed ceramic color tiles in vertical surfaces size 450x300x7mm thick including 10mm thick rendering (1:4), set and jointed with grey cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engineer-in-charge.

Material and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles colour, including 15mm thick screed bed (1:6),complete all as specified abd directed.

Material and labour for 18 to 20mm thick (full length size) Granite of any shade (table rubbed and polished as in cooking platforms and like set in cm 1:4 incl pointing in white cement (1:2) using marble dust with admixture to match including moulding of free exposed of marble slab (fixed as in repair) complete all as specified and directed by Engineer-in-Charge.

Material and labour machine cut kota stone slab as in flooring of size 600x600mm each & 18-20 mm thick, set and jointed in cement slurry including border of 100mm wide baroda green mable as per pattern approved over & including screed of 20-22 mm thick in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing, in floors/steps etc, complete all as sepcified and directed. Note : 1. All the edges of slabs shall be grinded/cutted at the right angle before laying, so that paper thin, smooth jointing to be obtained. 2. The colour of the slabs shall be uniform.

M&L for Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete with pointed in cement mixed with pigment to match the shade stone slab, in floors/steps etc, complete all as sepcified and directed.

M&L 40mm thick PCC 1:2:4, type B 1, (using 20 mm graded crushed stone aggregates) as in floor complete all as sepcified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 15mm bore pipe, complete all as specified and directed.

Taking up or down steel tubing and connections, for refixing or removal from site for 20mm bore pipe, complete all as specified and directed.

Supply and fixing , 15 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply and fixing 20 mm bore galvanised steel tubes, medium grade with all fittings for water supply pipes etc fixed to walls and ceilings or laid in floors complete all as specified and directed.

Refixing old steel tubing 15mm bore and connections in new or old position (walls, ceiling, floors, etc) including cleaning, complete all as sepcified and directed.

Refixing old steel tubing 20mm bore and connections in new or old position (walls, ceiling, floors, etc) including cleaning, complete all as sepcified and directed.

Supply and fixing in repairs, 15 mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs, 15 mm bore pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as sepcified and directed.

Supply and fixing in repairs, PVC valveless, syphonic action type, flushing cistern (ISI marked) of 10 litres capacity, low level (white) with inlet, ball valve, float and handle including bracket and flush pipe complete all as sepcified and directed.

Supply and fixing in repairs, vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc including all accessories reqd complete all as specified and directed.

Supply and fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), coloured, including fixing acessories, complete all as sepcified and directed.

Supply and fixing in repairs Vitreous china wash basin, white, flat back, size 640x450mm excluding taps, waste , chain and plug and porcelain stopper but including brackets. complete all as sepcified and directed.

Supply and fixing in repairs , Vitreous China Urinal, half stall type, white, (excluding flushing cistern and flush pipe) and waste pipe complete all as specified and directed.

Supply and fixing (in repairs) sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and washers, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed.

Supply and fixing in repairs chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union Brass chromium plated shower rose 125mm size complete all as specified and directed.

Supply and fixing in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm, complete all as sepcified and directed.

Supply and fixing in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as sepcified and directed.

Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for PVC soil waste discharge pipes 110 mm size, complete all as sepcified and directed.

Supply and fixing in repairs 110 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches/walls or in floors complete all as sepcified and directed.

Supply and fixing in repairs 75 mm PVC (SWR) pipes double socketed, in any length with rubber ring joints, laid in trenches/walls or in floors complete all as sepcified and directed.

Supply and fixing in repairs PVC bend any radius, conforming to IS:14735, suitable for UPVC soil waste discharge pipes 75 mm size, complete all as sepcified and directed.

Supply and fixing in repairs PVC cowl any radius, conforming to IS:14735 suitable for 110 mm bore, complete all as sepcified and directed.

Supply and fixing in repairs UPVC floor trap with PVC grating suitable for 75 mm external dia, type-B pipes, ISI marked complete all as sepcified and directed.

Supply and fixing in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement for 110 mm external dia, type-B pipes, ISI marked complete all as sepcified and directed.

Supply and fixing in repair, Harrison rails, mild steel, chromium plated with fixing brackets, stops, fancy type , 20mm bore having fancy end knobs at each end, fixed with rawl plug to wall as in curtain rods complete all as specified and directed. (Quality and design shall be as approved by GE).

Material and labour for dismantling water tank exc 250 but not exc 500 Litres capacity and removing to store, complete all as sepcified and directed.

Supply and fixing 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I, complete all as sepcified and directed.

Material and labour for cleaning and removing all scale and dirt, etc from PVC tanks exceeding 250 but not exceeding 500 litre capacity tanks from mouths of circulating pipes, etc complete all as specified and directed.

Supply and fixing in repair Cast copper alloy, chromium plated Tubular towel rail, 20mm dia, D type, 60cm long, complete all as sepcified and directed.

Material and labour for dismantling brick tiles or terracing tiles single layer on roof, cleaning and stacking the serviceable tiles for reuse, offering credit for unserviceable tiles and removing rubbish to a distance not exceeding 250 Mtr complete all as sepcified and directed.

Material and labour for demolition of mud/ cemented work in roof any thickness including plastering and leeping (Whether full thickness removed or only part thereof) complete all as sepcified and directed.

Material and labour for roughing surfaces of roof after removal of mud phuska/ cemented work completely and applying cement slurry with 3.00 Kg /Sqm complete all as specified and directed.

Material and labour for 40mm thick brick tiles laid and bedded in cement mortar 1:6, 15mm thick and joints grouted flush in cement mortar 1:3 mixed with 5% or crude oil by weight of cement complete all as specified and directed.

All as per srl item No. 90.00 (here-in-above) but except tiles, complete all as specified and directed.

Material and labour for APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3 mm thick reinforced with polyster non woven fabric (wt not less than 150gms/Sqm) laid on primed surface by forced application complete all as specified by torching process as per manufacturer instruction complete including cleaning of surfaces including side overlaps as specified, complete all as specified and directed.

Material and labour for 15mm thick plastering in cement mortar 1:4 on RCC roof slab surfaces, finished even and fair without using extra cement complete all as specified and directed.

Material and labour for PCC 1:2:4, type B-0, (using 12.5mm mechanically crushed stone graded aggregates) laid over roof slab as in padding to make good the depressions all as specified & directed by Engineer-in-Charge.

Dismantling of wall and ceiling boards (fibre,pulp, insulation, etc. or insulation boards/slabs/blankets, any thickness including cover fillets, frameworks, etc. complete all as specified and directed

S &F for anodised aluminium snap grid frame work for false ceiling size of grid 600x600mm with Hangers fixed to roof slabs by means of ceilling cleats and expansion hold fasteners complete all as sepcified and directed by Engr-in-Charge.

M & L for Prelaminated particle board, 12mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as sepcified and directed.

S&F solid PVC wall lining consisting of 5mm thick plain coloured PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and as shown on drawing complete all as specified and directed by Engr-in-Charge.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and as shown on drawing complete all as specified and directed by Engr-in-Charge.

M&L for dismantling rusted / damaged asbestos cement/MS roof sheeting any type and disposing off complete all as specified and directed.

Dismantling mild steel work or wraught iron of any description and in any position complete all as specified and directed.

S&F steel work in tubular truss including special shaped washer etc complete using ERW or induction butt welded tubes for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe 410W (grade-E 250) quality-A complete all as specified and directed.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws / L type or J type hook complete all as sepcified and directed.

M&L for RCC 1:2:4, type B1, (using 20 mm stone aggregates) as in landings, slabs, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces including form work etc complete all as sepcified and directed.

Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion anti fungal paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge.

Material & Labour for complete removal of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying two coats of exterior acrylic emulsion anti fungal paint in camouflaging pattern of any shape and any size complete all as specified and directed by Engineer-in-charge,

M & L for complete removing by mechanical means old treated external walls/RCC surfaces/soffits of chajjas/roof rojections/cantilevers/balcony etc including cornices and applying two coats of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm, including border blue(apex), complete all as specified & directed by Engineer-in-Charge. Note : The rate for form work should include for work upto 15 Mtr height shall be deemd to be included in total cost of this item.

M & Lfor preparing existing treated surfaces on walls/ceiling by filling wall putty in depressions, minor holes and cracks sand papering etc and making the surface smooth and applying One coats of cement base paint @ 5 sq.m/kg/1 coat over a coat of exterior wall primer by using branded cement based paint, including filling wall putty in minor holes/depressions, sand papering etc, including repair of plastering patch each not more than 0.25 Sqm complete all as specified & as directed by Engineer-in-Charge. Note : The rate for form work upto 15 Mtr height shall deemd to be included in total cost of this item.

M & L for preparing existing treated surfaces on walls/ceiling by filling wall putty in depressions, minor holes and cracks sand papering etc and making the surface smooth and applying 01 coat with oil bound distemper (light shade) by using roller to wall surfaces, including repair of plastering patch each not more than 0.25 Sqm, incl border blue(apex) complete all as specified and directed.

Material and labour for complete removal of existing treatment from plastered or unplastered surfaces of walls/Ceiling/Chajja and applying two coats of distemper oil emulsion over a coat of putty and primer (JK wall putty/Birla white) including filling of minor holes /cracks with putty and repair of plastering patch each not more than 0.25 Sqm etc complete all as specified and directed by Engr-in-Charge.

M & L for preparing existing treated surfaces on walls/ceilings including cornices and applying two coats of white wash by making the lime slaked at site, including filling of minor holes /cracks with putty and repair of plastering patch each not more than 0.25 Sqm, complete all as specified and as directed by Engineer-in-Charge.

M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 and as directed by Engr-in-Charge. Note : Rough cast finish to be as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger aggregate are thoroughly covered.

Material and labour for preparation of wooden surfaces and applying one coat of synthetic enamel paint on old painted wooden surfaces of any description exc 10cm width or girth etc complete all as specified and directed by Engr-in-Charge.

M & L for preparing old painted steel and iron surfaces of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M & L for writing letters or figures (block, Roman, Italian, Indian) Not exceeding 30 cm High including Stops,height not less than 10cm, commas, short lines, dashes, hyphens, brackets, etc, complete all and the color of the paint and dimension of the letter to be used as approved by Engineer-in-Charge

Shubham Enterprises

Swami Enterprises