Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC GP KIZHAKKAMBALAM KOLENCHERY | THRISSUR | KERALA | 680667 | L1 | Accepted-AOC AOC | |
| 2 | L2₹40.7 L+₹2.8 L (7.29%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L2 | Rejected-Finance L1 being accepted |
Tender Value
₹43.5 L
EMD Value
₹87,000
Closing Date
30 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(I)(CG)KOCHI
GE(I)(CG)KOCHI BUILDING NO.22/2614, OPP. SANTHOM CHURCH MUNDAMVELI POST RAMESWARAM KOCHI-682 507
IMPROVEMENTS TO OTM ACCN BUILDING NO P 1 AT ICGS BEYPORE, KOZHIKODE
2022_MES_533194_1
GE/CG/8806
Open Tender
Civil Works
Item Rate
180 days
BEYPORE
AS PER NIT/TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I)(CG)KOCHI
₹87,000
Yes
17 Sept 2022
23 Jun 2022
6 Aug 2022
23 Jun 2022
30 Jul 2022
9 Jul 2022
23 Jun 2022 - 30 Jun 2022
Amount
SCHEDULE 'A' PART-I(B/R WORKS)
Taking out and stripping old tarfelt over roofs, prapets walls of any description an in any direction including cement plastering and removing the rubbish n.exe 1.50 KM etc coplete including removing the debrish outside MD land complete all as specified and as directed.
Material and Labour for preparation of roof surfaces and laying chicken wire mesh 0.60mm dia with apertue 12x12 mm stapled properly with all as specified and directed.
Material and Labour for plain cement concrete 1:2:4 type B0 using 12.5mm graded crushed stone aggregate as in concrete padding for roof treatment in average thickness 40mm, top surface of concrete finished even and fair without using extra cement complete all as specified and as directed. Note: Water retaining test (Ponding test) shall be carried out after PCC padding for 48 hrs. In case slightest indication of leakages/ seepages is noticed the same shall be rectified by grouting the affected portion without any extra cost to Govt. Thereafter ponding test shall be repeated till there is no indication of seepages/ lekages.
Material and labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3kg/sqm, reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied by torch-on application including minimum 10 cm over lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminium paint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed.
Material and Labour for cutting out cracks to V section of 10mm size on existing roofs or terracing, cleaning out, wetting, grouting, with cement and sand slurry 1:3 complete all as specified and as directed.
Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc including removal of debries out side MD land all specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding, removing materials and rubbish off the premises complete all as specified and as directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified.
Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.
Material and labour for rendering 15mm on fair faces of brick or concrete surfaces in CM 1:6, finished even and fair without using extra cement complete all as specified and directed.
Material and Labour for cement plaster 5mm thick in CM 1:3 on concrete surface as on ceilling finished even and smooth with out using extra cement complete all as specified and as directed.
Material and Labour for rendering 15 mm thick in CM 1:4 on brick/concrete surface of walls, finished fair and even surface without using extra cement complete all as specified and directed.
Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) all as Specified.
Material and labour for providing 25mm thick plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring finished rough to reiceve toping complete all as specified and as directed.
Material and Labour for 75mm thick Plain Cement Concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection, floors, pavings and hardstanding etc, finished even smooth without using extra cement etc including necessary forwork and filling the joints with sand and bitumen in 1:1 ratio complete all as specified and as directed.
Material and Labour for vitrified ceramic tiles 8-10 mm thick light shade area of each tiles not exceeding 0.36 sqm but not exceeding 0.42 Sqm, of any shade and any pattern (pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:4 and pointed in coloured cement to match coloured tiles complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
All as per item No16 above but in vertical surfaces like skiting/dado etc jointed in neat cement slurry and pointed in colored cement to match colour of tiles over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for non-skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile of size 400 x 400 x 7 to 8mm thick in floors etc, set and jointed in cement mortar and pointed in white of coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed. NOTE: No extra cost shall be allowed for removing and re-fixing and necessary cutting of door etc if any required during execution of work.
Material and Labour for glazed ceramic coloured tiles in vertical surface 450x300x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.
Demolition of cement concrete in ground floors and paving ( reinforced) n exceeding 15 cm thicknesses, below or above ground level, complete all as specified and as directed.
Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
Supply and Fix TMT(CRS/HCR) bars 6 to 8mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Material and Labour for RCC M30 design mix using 20mm graded stone aggregate, as in slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work, all as specified and as directed NOTE: Reinforcement shall be measured and paid separately.
Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding, grinding ect), and laid over in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 15 mm thick backing coat in CM 1:4 and pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately.
Material and Labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation complete all as specified and directed
Material and labour for preparation of of new plastered/concrete surfaces of walls and applying two coats of acrylic distemper of approved shade/tint over a coat of primer, over 3mm thick wall care putty finish to achieve uniform smooth surface of wall all as specified and as directed.
Material and labour for preparation of new plastered/concrete surfaces of ceiling and applying two coats of acrylic distemper of approved shade/tint over a coat of primer all as specified and as directed.
Material and labour preparation of newly plastered wall surfaces and applying two coats of exterior emulsion (weather coat) paint over a coat of primer omplete all as specified and as directed.
M & L Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of Distemper oil emulsion on wall surfaces.
Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed by Engineer-in-Charge.
Material and labour for one coat of white wash on old ceiling surfaces including necessary preparation all as specified and as directed
Material and labour for preparation of old decorated wooden surfaces of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed.
Material and labour for preparation of old decorated surfaces of steel of any description exceeding 10 cm width or grith not otherwise specified and applying one coat of syntheic enemal paint all as specified and as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 sqm in each and removing as directed.
Material and labour taking down chowkhats or frames, without taking off shutters from the frame not exceeding 1.5 Sqm in each and removing as directed.
Taking down shutter of any drescription Not exc 1 sqm in each panes and refixing the same opening complete all as specified and directed.
Taking down shutter of any drescription exc 1 sqm but not exc 2 sqm in each panes and refixing the same opening complete all as specified and directed.
Dismantling of plain or corrugated steel sheeting any gauge thickness including nainital or similar pattern roof/wall coverings complete all as specified and as directed.
Supply and fixing pre-colour coated high tensile strength galvalume sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through specialist agency complete all as specified and as directed.
Supply and fixing Pre-painted galvalume aluminum zinc coating GI based Plain sheet roofing with yield strength (550 MPA) prepainted with aluminium (55%) and zinc (45%) alloy coating applied through continous hot dip process having tatal coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150gms/sqm in length and width as per site condition fixed with complete acessories as per manufacturer's instructions through through specialist agency and complete all as specified and as directed.
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) three track window ( two shutters glazed & one shutter wire gauge) with frame, glazed with 5 mm thick tinted glass and, wire gauge with stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm including rubber bead joining cleat for fixing of Member for wire gauge Section shall be 18.00 x 25.00 x 1.35 (Section No 20791). position, concelled type lock for all three shutter, PVC roller etc all as specified below, including taking down old window and making good jambs, cill, ceiling with 10mm thick plaster in CM (1:4) and applying two coat of Oil bound distumper over a coat of wall care putty complete all as specified and directed including taking down old unservicable one (a) Frame (top & side) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21447) (b) Frame (bottom) section shall of size 92.00 x 31.75 x 1.20 mm ( Section No 21446) (c) Top & side Members of shutter Section shall be of size 18.00 x 40.00 x 1.19 (Section No 21455) (d) Shutter Interlock Section shall be of size 18.00 x 40.00 x 1.19 (Section No 21454) (e) Bottom Members of shutter Section shall be of size 18.00 x 40.00 x 1.29 (Section No 20844). Make Jindal/Hindalco/Nalco
S&F aluminium ventilator (powder coated with approved colour) partialy glazed and partialy louvers, outer frame & mullion fabricated with aluminium section of size 82.50 mm x 38.00 mm x 1.20 mm thick, half portion glazed with 4 mm thick frosted glass including rubber beading, & glazing clip, half portion louvers of 80 mm wide & 4 mm thick frosted glass including aluminium louver patti including S.S wire gauge of fixing of 0.36mm dia and 1.40 width of aparture with 25x3mm think aluminium strip with screw to upper half portion of ventilator all fitting & fixture and fixed in position including taking down old ventilator complete all as specified and directed including taking down old unservicable one
Material & Labour second class hard wood plain straight chowkhat and frame, wrought framed rebated on the solid or chamfered put toghter with glue pinned at joints complete all as specified and as directed.
Supply and fixing 30 mm thick Flush shutters, solid core construction, with block board core and plywood face prelaminated decorataves panels, commercial type on both sides complete all as specified and as directed.
Supply and fixing 30mm thick 2nd Class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc., divided into squares , edges of framing plain chamfered or rounded, mitred and rebated sash bars, any numbers, size of members of shutters as specified in SSR Part-I Section 8, clause 8.28 (a) for windows and doors.
Supply and fixing Solid PVC Door Frame of size 50 mm x47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. Square tube, supporting & fixing in opening as per specification & drawing complete all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of mild steel tubes for top & bottom rails, mild steel frame shall be covered with heat moulded plian colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement supplying and fixing in the frame at site as per specification & drawing of SSR Part II.
Supply and fixing for Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old un servicable one.
Supply and fixing 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed by Engineer-In-Charge.
Supply and fixing 100 mm long aluminium anodised barrel tower bolt all as specified and as directed by Engineer-In-Charge.
Supply and fixing 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete.
Supply and fixing 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete
Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified
Supply and fixing in repair 600 mm long PVC connections 15 mm size with PTMT nuts at both end complete.
Supply and fix waste coupling of PTMT 32 mm size (half or full threaded) suitable for urinals/ WHB/Sink etc (Minimum weight 32 mm - 45 gms) all as specified and as directed.
Supply and fix in repair 10 Ltr capacity PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including brackets, flushing pipe, 450mm long PVC Connection and connection to trap, and to flushing and making good to floor complete all as specified .
Supply and fix in repair plastic water closet seat cover, black or white, closed pattern with flat bottom, and cover and mild steel aluminised hinging device etc complete all as specified and directed.
Supply and fix in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium ally sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. Make: SANDHU, EVEREST
Supply and fix in repairs Bib tap cast copper alloy CP , with capstan handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete, all as specified.
Supply and fix in repairs Angle valve CP cast copper alloy, with capstan handle, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed complete all as specified and directed.
Supply and fix in repairs Stop valve cast copper alloy, screwed down high pressure with capstan handle, screwed both ends for 15 mm bore iron pipe or for unions and fixed, complete all as specified and directed.
Supply and fixing in repairs vitreous China wash hand basin, white, flat back size 580X450mm including 32mm brass chromium plated waste fitting, a pair of cast iron bracket duly painted including cutting and pinning in ends making good disturbed surfaces in CM 1:3 excluding pillar tap but chain , plug and porcelain stopper, brackets etc complete all as specified and directed.
S&F in repair.Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union complete all as specified and as directed.
S&F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white complete including ‘P’ or ‘S’ trap , seat cover and fixing of flushing cistern, brackets, flushing pipe etc, complete all as specified.
S&F in repairs Pillars taps, 15mm dia bore cast copper alloy with capstan heads, CP fency type screwed down high pressure with or without lettered'Hot' or cold with long screwed shanks and ly nuts, screwed for iron pipe and fixed complete all as specified and directed
SCHEDULE 'A' PART-II(E/M WORKS)
Taking down carefully (copper/aluminum) point wiring complete of any type (batten/surface conduit) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants regulators etc complete and making good disturbed surfaces of wall, floor or ceiling with plaster or tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed.
Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FR) upto and including working voltage 1100volts grade, drawn through and including non metallic rigid PVC conduit not less than 20mm drawn in concealed conduit in wall and open conduit on ceiling including all accessories ISI marked including factory made galvanised modular flush sheet metal enclosure having top bottom side and back wall knock out for conduit entry from any direction suitable to the approved make of switch/socket outlet conforming to IS 14772-2000 and suitable for for cover plates and unsheathed copper conductor stranded cable (FR) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:- Note: (i) Cover plate shall be measued and paid separately under relevant items. (ii) Cutting chases/ wall shall be measured and paid separately under relevant items. (iii) Circuit wiring from DB to switch board is deemed to be included in the rate quoted.
(a) one light point controlled by one switch 5 Amps
(b ) one fan point point controlled by one switch 5 Amps
(c) One 3 pin socket outlet 5 Amps on Independent board
(d ) One 3 pin socket outlet 5 Amps on same board
( e) One bell point controlled by one bell push
All as per Item No. 68 above but with 2.5 sq mm PVC insulated copper conductor cable(FR) including 2.5sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.
Supply and Fix Modular Switch 1 way, 6 Amps, 1 module complete all as specified and as directed.
Supply and Fix Modular Bell Push, 5 Amp, 1 module complete all as specified and as directed.
Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed.
Supply and Fix Modular Socket, 6/16 A- 2/3 pin combined 2 module complete all as specified and as directed.
Supply and Fix Modular Switch 1 way, 16 Amps, 1 module complete all as specified and as directed.
Supply and fix Fan step regulator, 120 w, 2 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 12 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 8 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 6 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 4 module complete all as specified and as directed.
Supply and Fix Modular metal flush box 3 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 12 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 8 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 6 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 4 module complete all as specified and as directed.
Supply and fix white cover plate with frame for 3 module complete all as specified and as directed.
Supply and fix ceiling rose, 65x50mm 3 terminal,poly carbonate,isolated body white/any shade complete all as specified and as directed.
Supply and Fix Bell, AC, 230 volts, 230 volts, single pole complete all as specified and as directed.
Supply and Fix Switch socket combination multipurpose 5 pin, 5&15 amp, 240 Volts complete all as specified and as directed.
Supply and fix Pendant ordinary, comprising ceiling rose, brass with insulated body lamp holder, cord grip pattern, and 0.5 sq.mmcopper flexible twisted twin cord up to1.5m complete all as specified and as directed.
Supply and fixing LED bulb 9 watts, 230 volt complete all as specified and directed. Make: CELS Cat part No CLLC-LP-10 or equivalent in Havells/Philips/Crompton Greaves.
Supply and fixing MCB double pole 240 volt B curve 10 KA 25 Amps capacity complete all as specified and as directed.
Supply and fix MCB TPN, 32 A, 415 volt C curve 10 KA complete all as specified and directed.
Supply and fix MCB single pole, 6 to 32 Amp 240 volt B curve 10 KA complete all as specified and directed.
Supply and fix VTPN MCCB 125 A, 8 way distribution board, with 200 Amps bus bar,double door flush type, with IP-54 protection, isolated neutral bars, door earthing, suitable for 4P MCCB of rating 125 A as incomer (frame F1) complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian Cat No 812042 or equivalent in L&T/Crompton Greaves/Havells
Supply and fix MCCB, 4 pole, adjustable thermal setting type, confirm to IEC 60947-II, F1 frame of rating 125 A, breaking capacity 25 kA complete with all accessories all as specified and directed by Engineer-in Charge. Make: Indo Asian Cat No 830273 or equivalent in L&T/Crompton Greaves/Havells
Supply and fix LED tube light fittings recessed mounting type, low depth aesthetically desgned LED 2 X 2 flat panels to enhance the delight of occupants complete all as specified and as directed. Make: Cat No. BCTBLR 36 W LED FP CW (Cool white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix LED tube light fittings with lamp 1X20 Watts,extruded aluminium housing and diffuser, free illumination for continuous operation complete all as specified and as directed. Make: Cat No. BCLAB 20W WH LED P (cool white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Surface mounted round LED down lighter with Al die-cast body, , finished with drop down PC diffuser to deliver low glare illumination with optimised heat sink for efficient heat dessipation all as specified and as directed. Make: Cat No. BGSLO SLEEK SURFACE 15W WH RD ( white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Surface mounted square LED down lighter with Al die-cast body, , finished with drop down PC diffuser to deliver low glare illumination with optimised heat sink for efficient heat dessipation all as specified and as directed. Make: Cat No. BGSLO SLEEK SURFACE 15W WH SQ ( white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Surface mounted square 1 X 1 LED luminaire with white powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover all as specified and as directed. Make: Cat No. BZSSQL18W LED WH i ( white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Surface mounted square 4 X 1 LED luminaire with white powder coated CRCA housing, seamless front frame with flat white high transmission acrylic cover all as specified and as directed. Make: Cat No. BZSSLL 36W LED WH i ( white) of Bajaj or L&T/Crompton Greaves/Havells
Supply and fix Bulk head luminaire with opal diffuser with energy saving new generation 10 Watt LED lamp, IP 65 protection all as specified and as directed. Make: Cat No. BIBWP 10W LED (white) of Bajaj or L&T/Crompton Greaves/Havells
Material and labour for Sub main wiring using two runs of single core PVC insulated cable(FR) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 4 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Material and labour for Sub main wiring using two runs of single core PVC insulated cable (FR) 6 sqmm copper conductor multi stranded and one run of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Material and labour for Sub main wiring using four runs of single core PVC insulated cable(FR) 6 sqmm copper conductor multi stranded and two runs of 6 sqmm copper conductor insulated cable (FR)using as earth wire drawn through and including non metallic PVC conduit pipe ISI marked of size 32 sq mm including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 6 run of 6 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way, single door, IP-30 protection (4 + 12 module) TPN MCB, 415 V as incomer, SP/DP/TP/TPN as outgoing complete all as specified and directed .
Supply and fix in repairs Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, SPN 4 way, single door, IP-30 protection DP MCB, 240 V as incomer, SP MCBs as outgoing complete all as specified and directed.
All as per ser item No 107 above but SPN 8 way, double door 240 volts
Supply and fix in repairs single pole and neutral enclouser with a two pin and earth plug and socket complete with and including one MCB single pole 20 Amps complete all as specified and directed.
Taking down fan of any type and size after disconnecting, depositing to store yard and Hanging/fixing only after repair/reconditioning fan of any type and size all as directed.
Collecting unserviceable ceiling fan 1200mm sweep 230V, AC single phase from store yard of AGE E/M and transporting to local market, cutting unserviceable winding from fan stater & rewinding same with super enamelled copper winding wire of existing gauge size including throughly cleaning all the components, oiling greasing & replacement of rusted unserviceable screws, hanging clamps with rubber reel, canopy condensers, bush, bearing & flexible copper connection wire etc complete all as directed.
All as per item No 111 above but exhaust fan 300 mm sweep
Material and Labour for Scraping down old paint of ceiling fan of any size 1200 mm sweep complete body & blade including down rod filling the cavities with filler and making smooth surface by applying sand paper painting the ceiling fan by means spray gun/brush with two coats of synthetic enamel white paint complete all as specified and directed.
All as per item No 113 above but exhaust fan 300 mm sweep
Supply and fix in repairs ceiling fan 1200mm sweep, 230 volt withdown rod, canopy etc, single phase 230 volt connecting complete all as specified and as directed.
Supply and fix in repair Exhaust Fan of size 230 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed.
Supply and fix in repair Exhaust Fan of size 200 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed.
Supply and Fix single pole and neutral enclosure with two pin and earth plug and socket complete with and including one single pole MCB of capacity 20 amps 240 volts complete all as specified and as directed.
Supply and lay cable XLPE 70 Sqmm 3.5 core, 1100 Volts grade, 415 volt, 50 Hz. insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of following sizes fixed in wall/ roof or laying in trenches etc.complete all as specified and as directed.
All as per item No 119 above but of size 35 Sqmm 3.5 core.
Earthing with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion including taking out old earthing all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete
Supply and fix in repair single pointed air termination aluminium rod 12mm dia 300mm long complete all as specified and as directed.
Supply and fix in repair aluminium strip 25mmx3mm complete with saddles epoxy base and fixing screws for fitting the strip all as specified and directed.
Supply and fix in repair for earth contunity conductor of size 32x6mm GI strip all as specified and directed.
Supply and fix test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw all as specified and directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps,cills, sunshades, shelves, lintels, etc.;and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good,cutting exceeding 20cm girth all as specified and directed.
Making opening on wall regular round shape for fixing exhaust fans and finishing with cement plastering works and white wash on finished surface similar to adjacent wall all as specified and directed.
Schedule of Credit (Minus) Rs. 61,397.00 NOTE: Bidder shall insert credit amount of Rs. 61,397.00 as rate in Green field under Col-13.
KDR CONSTRUCTION
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .