Drought 2023 24 Construction of pump house Installation of submersible motor pumpset and interlinking

Amount

Construction of Pump house

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

5.3A: Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand incuding manufactured sand derived from Recycled ConcreteAggregate (RCA) upto 20%: 3 graded stone aggregate 20 mm nominal size Recycled Concrete Aggregate (RCA) upto 20%)

13.1.2:12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand).

13.9.2:Cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.20 mm cement plaster

10.5.1:Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angels 40x40x6 mm for diagonal braces

13.37.1:White washing with lime to give an even shade:New work (three or more coats)

OD132743/2025-2026:Towards the charges of lettering of scheme details in pump house structure using approved paint as per the direction of departmental officers.

Supply and Fixing of Submersibile Motor Pumpset

OD133143/2025-2026:Supply, erection, testing and commissioning of KWA prequalified reputed make tube well submersible pump set with SS impeller, SS shaft and CI pump casing suitable for bore well with 180 mm dia inner casing pipe. The duty condition is as follows 1) 4 LPS at 140 Meter Head Borewell submersibile Pumpset 2) Motor - Supply, erection, testing and commissioning of KWA prequalified reputed make vertical solid shaft foot mounted TEFC 3phase induction motor suitable for the above pump set working 3 phase, 50 Hz , 415 V working in AC supply. 3) Soft Starter - Supply erection, testing and commissioning of suitable rating (Fully automatic ) starter for the above motor with over voltage and under voltage protection , single phase preventer, over load relay with motor protection relay complete 4) Panel board (suitable for operating two pump sets bunt one pump set at a time ). 5) Valves- Supply of suitable size best quality heavy duty ISI marked double flanged sluice and Non return valves with suitable pressure rating. Fitting of valves shall include proper RCC support especially for Non return valve. 6) Suction and delivery pipe connections - Supply and fitting of suitable size best quality G I pipe (Medium) for total length of 10 meter suitable for the above pump set connecting the delivery side of the pump with valves and suitable specials to connect with the pumping main. 7) Supply and installation of suitable glycerin filled pressure gauge. 8) Maintenance for a period of One years

OD139966/2025-2026:Supply conveying and fixing of three phase, 415 volt and 50 Hz module for mobile starter & submerssible controller conforms to IS/IEC 60947-4-1 with features of auto restart, vibration proof enclosure with IP54 protection class, ON/OFF , voltage and ampere indication and protection against overload, single phasing , phase reversal , phase imbalance. etc

OD133080/2025-2026:Supply and erecting 27 Gauge 63mm dia uPVC submerssible column pipe. including cost of pipe and specials and all labour charges,hire charges of machineries ,etc. complete as per the direction of departmental officers

OD138878/2025-2026:Supply and Fixing 6 Sqm 3 Core Flat Summerssibile Cable

OD133591/2025-2026:Toward the charges of extra rate for supply and fixing required dimension of Pannel Board Frame Size Of (0.7 X 0.7) and Meter Box Size of (0.44 x 0.325 x 0.13 Meter)- for KSEB Smart meter implementation

OD133196/2025-2026:Providing GSM Enabiled feature Mobile Phone Compactabile with automatic controlling of moudle for mobile starter and submersibile controller

Linking work

OD132877/2025-2026:Toward the charges of 63mm PVC pipline linking to Existing 90mm PVC pipe line at Kanniyamangalam Borewell pump house using various pipe specials. including earth work excavation,tar/cc cutting,fencing,etc. including all labour charges and material charges and testing and commisioning etc complete as per the direction of departmental charges.

100.98.457:Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm.

100.31.1.1:Conveying and fixing C.I. sluice valves (with cap) by providing bolts, nuts, rubber insertions etc., complete, but excluding the cost of the valve (tail pieces, if required, will be paid separately): 80mm diameter, Class I.

OD132924/2025-2026:Providing and fixing Protection tube for Sluice/GM Valve size up to 150mm

KSEB Connection Charges

OD133000/2025-2026:Total cost of KSEB Connection charges for fixing electric pole and service connection as per the KSEB Smart meter Box fixing Specification

SIVADASAN.M (BID ID -2329407)

Bidder Name

M SIVADAS

SIVADASAN.M