Loading…
Loading…
Tender Value
₹8.7 Cr
EMD Value
₹17.3 L
Closing Date
30 Jun 2026, 11:00 am
Soft upgradation and improvement of KGB, KTSH, JRMG & GTW Railway stations under the jurisdiction of ADEN/Central/BSP.
DRM-ENGG-BSP-T-90-26-27
DRM-ENGG-BSP-T-90-26-27
Open
18 Months
Ludhiana, Punjab
₹0
₹17.3 L
2 Jun 2026
2 Jun 2026
16 Jun 2026
Item Breakup - A-DSR-2023
88 mm, weighing not less than 170 gms 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 18.7 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. ( Internal work - Exposed on wall ) 111 18.7.3 25 mm nominal dia Pipes Metre 603 401.55 242134.65 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 112 18.8.1 15 mm nominal dia Pipes Metre 388 497.8 193146.4 113 18.8.2 20 mm nominal dia Pipes Metre 747 537.6 401587.2 114 18.8.3 25 mm nominal dia Pipes Metre 633.5 627.25 397362.88 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This 18.9 includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work 115 18.9.3 25 mm nominal dia Pipes Metre 27.5 355.4 9773.5 BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing G.I. pipes complete with 18.12 G.I. fittings including trenching and refilling etc. External work 116 18.12.6 50 mm dia nominal bore Metre 7845 762.15 5979066.75 117 18.12.8 80 mm dia nominal bore Metre 770 1041.7 802109 Making connection of G.I. distribution branch with G.I. main of following sizes by providing 18.13 and fixing tee, including cutting and threading the pipe etc. complete : 118 18.13.1 25 to 40 mm nominal bore Each 11 911.9 10030.9 18.15S BRASS FITTINGS Providing and fixing brass bib cock of 18.15 approved quality : 119 18.15.1 15 mm nominal bore Each 49 353.25 17309.25 Providing and fixing gun metal gate valve 18.17 with C.I. wheel of approved quality (screwed end) : 120 18.17.1 25 mm nominal bore Each 182 622.4 113276.8 121 18.17.1A 20 mm nominal bore Each 36 539.95 19438.2 122 18.17.4 50 mm nominal bore Each 207 1026.65 212516.55 123 18.17.6 80 mm nominal bore Each 22 2604.55 57300.1 Providing and fixing gun metal non- return 18.19 valve of approved quality (screwed end) : 18.19.4 50 mm nominal bore 124 18.19.4.1 Horizontal Each 9 1371.2 12340.8 C.I. SLUICE VALVES/ FIRE HYDRANTS & 18.31S FIXTURES 18.48 Providing and placing on terrace (at all floor Per 83000 11 913000 levels) polyethylene water storage tank, IS : Litre 12701 marked, with cover and suitable 125 locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 18.54S PTMT FITTINGS Providing and fixing PTMT bib cock of 18.54 approved quality and colour. 18.54.1 15 mm nominal bore, 86 mm long, weighing Each 34 125.6 4270.4 126 not less than 88 gms Providing and fixing PTMT stop cock of 18.55 approved quality and colour. 18.55.1 15 mm nominal bore, 86 mm long, weighing Each 50 118.5 5925 127 not less than 88 gms Providing and fixing PTMT, push cock of 18.57 approved quality and colour. 18.57.1 15 mm nominal bore, 98 mm long, weighing Each 60 112.8 6768 128 not less than 75 gms Providing and fixing PTMT grating of 18.58 approved quality and colour. 18.58.1 Circular type 129 18.58.1.1 100 mm nominal dia Each 11 37.6 413.6 130 18.58.1.2 125 mm nominal dia with 25 mm waste hole Each 90 51.85 4666.5 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing PTMT Ball cock of approved quality, colour and make complete 18.62 with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 18.62.3 25 mm nominal bore, 152mm long, weighing Each 24 523.8 12571.2 131 not less than 440 gms 21.0 ALUMINIUM WORK 21.1S General BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ 21.1 neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.1 Anodised aluminium (anodised transparent or Kg 354.75 495.05 175618.99 132 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.1 Anodised aluminium (anodised transparent or Kg 383.75 598.6 229712.75 133 dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene 21.3 gasket etc. complete as per the architectural drawings and the directions of engineer-in- charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.1 With float glass panes of 4.0 mm thickness Sqm 127.5 1176.8 150042 134 (weight not less than 10kg/sqm) Total 81117220.16
Item Breakup - B-DSR-2020 (Landscaping work)
Item Breakup - C-NS Items
'Supplying, laying, jointing, fitting & fixing G.I. Metre pipe of dia 150 m m confirming to relevent IS Specification including all leads. The rate includes supply of G.I. pipes with socket at one end, cutting, threading, fitting BILASPUR DIVISION-ENGINEERING/SOUTH EAST CENTRAL RLY
Manufacturing, supplying & fixing of pr- Each fabricated RCC coping stone of size 530mm x 1125mm x 100mm thick as per top face designed and approved by site Engineer with M-30 grade RCC with 8 mm dia. tor steel at 150mm c/c both ways and manufactured by vibro compaction process using jointless FRP/GRP steel moulds of required size, shape & design. The item includes cost of cement, reinforcement, transporation etc. (Note : Under layer of cement mortar to be laid as par site conditions & should be paid for separately)
Manufacturing, supplying & fixing of various Sqm fully retro reflective board made with 3M HIP (High Intensity Prismatic) grade retro reflective sheet of Avery Dennison or 3M make. Board are to be made with 2 mm thick aluminium sheet back supported with 25x25x3 mm angle, back supported diagonally with same angle with arrangement for fixing at site including nut bolt (minimum 10 mm dia) complete of make 3M or Avery Dennison and indicator's boards are i.e. speed boards, cross over boards, caution & TP/TG, TG/LH boards, W/L boards etc, LWR/Curve board/Gang board/Point & crossings boards, jurisdiction boards, road sign boards or any other type of boards of various size as per the provision of G & SR, IRPWM and approved circulars & drawings etc.
Supplying, erecting and fixing precast Each concrete reinforced bench with back rest. Bench shall consist of 2 nos. L shaped base support in natural cement colour of thickness 100 mm, back height 1000 mm, front height 450 mm, base width 620 mm and 5 nos. reinforced concrete planks in red colour and size of 1500x100x50mm and 1 no. reinforced concrete plank of 150x200x50mm; manufactured by using M-30 grade concrete & reinforced suitably; all parts to be joined with galvanised nuts and bolts of suitable size. All bolts to be sealed after assembly. Complete job to be done as per directions of Engineer Incharge Total 4151457.00
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
InsuranceSuretyBondAnnexureM.pdf Annexure M
ATTACHMENT
AnnexureHBidsecurityformat.pdf
ATTACHMENT
BGFORMAT.pdf
ATTACHMENT
AnnexureAEngg.Org..pdf
ATTACHMENT
AnnexureBPlantMachinery.pdf
ATTACHMENT
AnnexureCWorkinHand.pdf
ATTACHMENT
AnnexureE-EFTdetail.pdf
ATTACHMENT
Annexure-G-Vitiationdetails.pdf
ATTACHMENT
Annexure J
ATTACHMENT
AnnexureYC.Acertificate.pdf
ATTACHMENT
AnnexureWExperiance.pdf
ATTACHMENT
Annexure-JforCertificateofRtd.Employee.pdf
ATTACHMENT
InsuranceSuretyBondAnnexureM.pdf
ATTACHMENT
Download all tender documents and submit your bid