Providing LWSS PC Habitations Kot Dhawali and Bahri, Rathoun and Chakyana in Tehsil Dharampur District Mandi HP under Jal Jeevan Mission

Amount

Percolation Well:-Excavation in foundation for digging well in dry excavation from G.L.upto the level,where well curb is placed the level,where well curb is placed depth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Wet well sinking gravel including all pumping, soring etc.complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

From spring level to 3.00 mtr.depth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

From spring level to 3.00 metre to 6.00 mtrs. Depth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

From spring level to 6.00 mtr.depth to 7.80 metre depth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Steel work in sigle section i/c cutting, hoisting & fixing in position etc.in RS joists,Channels,angles & tees etc.complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Lowering of well curb complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing and laying cement concrete work 1:1:2 (1cement: 1 sand:2 graded stone aggregate 20mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in:-

Suspended floors, roofs, landings and shelves and their supports, balconies, beams ,griders bressumers and cantilevers upto all floor level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

in Columns, Pillars & Posts etc.complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Walls any thickness including attached pillaster buttresses, plinth and string courses from top of foundationup to all floor level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Stair cases (except spiral stair cases) excluding landing nut including preparing of the surface and finishing of nosing upto floor two level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing and Laying no fine concrete 1:4 (1cement : 4 stone aggregate) complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering , strutting and propping etc. with wooden battens and ballies height of propping and centering below supporting floor to ceiling not exceeding 4meters and removal of the same for insitu reinforced concrete and plain complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters, buttresses,plinth & string courses and the like complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Flat surfaces such as soffits of suspended floors, roofs, landings and the like floors upto 200mm kin thickness complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Beams ,cantilevers,girders & lintels, side & soffits of beams, haunching, binding & placeing in position complete upto floor two level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing Tor steel reinforcement for RCC work including bending, binding & placing in position complete upto floor two level complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing and laying cement concrete1:3:6 (1Cement : 3 Sand : 6 graded stone aggregate 40 mm nominal size) & curing complete excluding the cost of form work in found.& plinth complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing and fixing SFRC Man hole cover with frame having frames size of 500 mm internal dia.(Medium duty)The weight of cover & frame should not be less than 116 kg complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing 200 mm wide CI rungs with chequered or ribbed non slip surface including fixing in structure with 200 x 200 x 100 mm cement concrete 1:3:6 ( 1 cement :3 sand : 6 graded stone aggre 20 mm nominal size ) complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Boulder/Stone filling dry hand packed tightly complete under lean conrete to prevent the entry of surface water complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Steel work welded in build up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paintin grating, framed guard bars ladders, railing brackedts and similar works complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Pump House above P/well :-Brick work using common burnt clay building bricks (IInd class) in super structure above plinth level upto floor two level in cement mortar 1:6 (1cement:6 sand) complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.

Providing and fixing pressed steel door frames manufactured from commercial mild steel of 1.25 mm thickness I/chinges fans lag joints bend and if required threshhold of mild steel angles etc. (a) Profile "A" with in all leads and lifts complete in all respect.

Providing and fixing wood paneled glazed or paneled and glazed shutters for doors, windows and clear story 40 mm thick windows including bright finished black enameled iron with necessary screws with second class deodar wood 40 mm thick in all leads and lifts

Steel work welded in build up section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead painting trusses and trussed portion in building and similar works complete with in all leads and lifts as per the direction and to the entire stisfection of the Engineer-in-Charge.in trusses and trussed purlings in building.

Providing and fixing prepainted sheet roofing 0.60mm thick Tata make complete in all respect as per the direction and entire stisfection of Engineer-in Charge.

15 mm cement plaster in single coat of rough sides of bricks/concrete stone walls for interior plastering upto floor two level including arrises internal rounded angles chamber and rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.

Flush pointing on Brick/stone masonary in CM 1:4 (1 cement:4sand)

Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 and) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. Including rubbing and polishing complete.

Providing and fixing M.S. Grill in windows and ventilators complete in all respect as per the direction of the Engineer-in-charge

Apply priming coat over new wood and wood based surface after and including preparing the surface by throughly cleaning oil dirt grease and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink in all leads and lifts

Painting two coats (excluding priming coat) on new wood and wood based surface with ready mixed paint brushing the give and even shade including cleaning of all dirt dust and other foreign matter and sand papering and stopping with ready mixed paint other than white in all leads and lifts

Providing 40x3mm flat iron hold fast 40 cm long including fixing to frame with 10 mm dial meters bolts and nuts and wooden plug and embeding in cement mortar block 30x10x15cm (1:3:6 (1 Cement:3 Sand :6 graded stone aggregate 20mm nominal size)

Providing and fixing following anodized aluminium fittings of anodized transparent and shade with necessary screw etc. complete

Sliding door bolts 250x16mm.

M.S. tower bolts (Barrel type) leads and lifts. 200x10mm.

M.S. tower bolts (Barrel type) leads and lifts. 100x10mm.

M.S. handles 125mm dia

M.S. handles 75mm dia

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including priming coat with distemper promer of approved brand and manufacture adter throughly brushing the surface even and sand papered smooth primer coat with distemper primer.

Finishing wall with water proofing cement paint of approved brand & manufacture & of required shade on undecorated wall surfaces (two coats) to give an even shade adter thotoughly brushing the surface to remove all dirt & remains of loose powdered materials

KARAN BEDI GOVT CONT