Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹36.6 L+₹31,725 (0.87%)Rejected-Finance D NO 39 12 27 1 3 MURALI NAGAR VISAKHAPATNAM 530007 | VISAKHAPATANAM | ANDHRA PRADESH | 530007 | L2 | Rejected-Finance Being Not L1 | |
| 3 | L3₹37.0 L+₹75,528 (2.08%)Rejected-Finance D NO 58 20 33 FLAT NO F 2 VAIKUNTAPARVATHI RESIDENCY APSEB COLONY BUTCHIRAJUPALEM VISAKHAPATNAM 530 027 | VISAKHAPATANAM | ANDHRA PRADESH | 530027 | L3 | Rejected-Finance Being Not L1 | |
| 4 | L4₹37.2 L+₹90,739 (2.50%)Rejected-Finance NEAR KONAM GUEST HOUSE CO OPERATIVE COLONY CHODAVARAM VISAKHAPATNAM 531036 | VISAKHAPATNAM | VISAKHAPATNAM | ANDHRA PRADESH | 531036 | L4 | Rejected-Finance Being Not L1 | |
| 5 | L5₹37.7 L+₹1.4 L (3.82%)Rejected-Finance D NO 18 13 4 3RD FLOOR HILL CREST APARTMENT SEETHAMADHARA NORTH EXTENSION VISAKHAPATNAM 530 013 | VISAKHAPATANAM | ANDHRA PRADESH | 530013 | L5 | Rejected-Finance Being Not L1 |
Tender Value
₹49.7 L
EMD Value
₹99,400
Closing Date
27 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (I) DM Visakhapatnam
GE (I) DM Visakhapatnam
STRUCTURAL REPAIRS TO RCC MEMBERS SUCH AS WALL, BEAM, CEILING AT GALLERY OF 09 BERTH AT DRY DOCK AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE (I) (DM) VISAKHAPATNAM
2023_MES_621010_1
8919/E8
Open Tender
Civil Works
Item Rate
Naval Dockyard Visakhapatnam
As per tender documents
9 documents required · 9 mandatory
₹500
GE (I) DM Visakhapatnam
₹99,400
Yes
27 Dec 2023
29 Sept 2023
3 Nov 2023
29 Sept 2023
27 Oct 2023
13 Oct 2023
Amount
M&L for removing and cleaning of existing peeled off portions of RCC walls / columns / ceilings of galleries, sea side facia walls, cope point chambers etc. including chipping, wire brushing and making good the corroded / rusted reinforcement with new reinforcement for binding reinforcement as required to existing reinforcement by welding / tying with mild steel wire (annealed) not less than 0.9 mm dia and gunniting the area with minimum pressure of 5 Kg/cm2 to an average thickness of 40 mm in CM (1:2) and finish the surfaces fair and even complete all as specified and directed. Note:- Supply only reinforcement and welded wire fabric will be measured and paid separately.
Material & labour for chipping & removal of existing damaged, crakced , spalled & loose portion of concrete of the RCC members completely till the reinforcement is exposed and sound concrete (20mm to 50mm) is observed by using mechanical means and manual chisels and further the surface is jetted with clean water for removal of dust and loose particles and complete all as specified and as directed.
M&L for application of polymer modified reinstatement mortar 20mm thick in isolated places of repair works of RCC members with Rendroc S2 of M/s Fosroc make or techno commercially equivalent or make as approved by GE having a compressive strength of M40 grade complete all as specified and directed.
S&F welded steel wire fabric fixed to RCC wall/ceiling with necessary fixing arrangement weight exceeding 2 kg/sqm but not exceeding 4 Kg/Sqm as per site requirement/ as per direction of GE, complete all as specified and directed.
M&L for TMT deformed bars of 10mm dia and over cut to length, bent to shape required and binding with MS wire (annealed) not less than 0.9mm complete all as specified and directed.
M&L for application of single component shrinkage controlled, polymer modified, fibre reinforced cementitious repair mortar (Renderoc SP40 of Fosroc Make or techno commercially equivalent or make as approved by GE) 30mm to 40mm thick in a single layer having a compressive strength of M45 grade to columns, Beams / Slab soffits & whereever it required in isolated areas of repair works to RCC members complete all as specified and directed.
Material & labour for providing Shear connectors and Anchoring : Drilling 12mm dia holes up to depth of 100mm and fix 10mm dia TMT bars L shaped anchor rods as shear connectors in defective concrete area of the slab, column, beams, chajjas, lintel etc., or any other structural member as the case may be. Clean the same using water and make sure that there is no fine particle present in the hole. Mix the base and hardener of the polyester resin Fosroc Lokfix with the spatula thoroughly. Fill the drilled and cleaned holes to a minimum depth of 3/4th of the hole with the prepared polyester resin and the reinforced bar shall be inserted to full depth of hole and extra length of the reinforcement bar shall be bent into the concrete to maintain proper cover to the reinforcement. complete all as specified and as directed.
Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc., complete all as specified and as directed.
Material & labour for polymer modified plastering in CM 1:6 , 15mm thick on fair faces of brick / concrete surafces finished even and smooth with out using extra cement and using Nitobond SBR at the rate of 4% of weight of cement complete all as specified and as directed. . Note:- SBR shall be measured and paid separately
Supply only Fosroc make Nitobond SBR chemical for mixing in polymer modified plastering complete all as specified and as directed.
Material & labour for preparation of new/old plaster surface of wall and ceiling and applying two coat of white wash to ceilings and walls of gallaries of jetties including surface preparation. Work in compact area, entry and exit through man holes, below ground level complete all as specified and as directed.
Supply and application one coat of two component system epoxy based bonding agent Nito bond SBR of M/s FOSROC or techno commercially equivalent or make as approved by GE to receive the Rendroc SP40 & Rendroc S2 complete all as specified and directed.
Dismantling structural steel work of any description including doors, railing, gates, trusses complete all as specified and as directed.
S&F for structural steel framed work such as angle, channel, I beams etc cut to shape, including bending and welding angles as necessary confirming to Fe-290, Gde E-165 as in supporting structure of duct covers, platforms (-12 to -15m level) and capstan (-1 to -2m level) working in a confined area including making good the disturbed portion of concrete surfaces with 1:1 1/2 :3 type A0 using 12.5mm stone aggregate complete all as specified and directed.
S&F for rolled mild steel plain or chequered plates confirming to Fe-290, Gde E-165 welded, riveted, bolted attachment to supporting structure of capstan, duct covers, valve pit access platform and working in a confined area including making good the disturbed portion of concrete surfaces with 1:1 1/2 :3 type A0 using 12.5mm stone aggregate complete all as specified and directed.
M&L for MS frame work such as grills, gratings etc with ends of bars, shouldered and / or riveted or forged into spikes for ladders framed balusters, walk ways, railings, nosing angle and similar works conforming to Fe-290, Gde E-165 at (-5m to -12m level and ground level) working in a confined area including making good the disturbed portion of concrete surfaces with 1:1 1/2 :3 type A0 using 12.5mm stone aggregate complete all as specified and directed.
M&L for painting of new / old steel surface of any description over 10cm width or girth and followed by application of paint scheme complete all as specified and directed. (i) One coat of primer (Dft. 1 x 50) epoxy zinc rich primer 50±5 microns (ii) 02 coats of Anti corrosive (Dft 2 x 150) (iii) 02 coats of coal tar epoxy paint
M&L for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat coal tar epoxy paint complete all as specified and directed. Note : - The work will be carried out in every three months or as per direction of Engineer-in-Charge for enhancing its serviceablity. Every coat / work will be measured and paid separately.
NOTE: The above items are to be executed in the galleries of the jetties (restricted work environment). The rates quoted shall be accordingly considered for all the safety gear, scaffolding, height, lead and lift in the all items.
UNITY PROJEKTZ
venkata sai constructions
SINGH BUILDERS
M/s Sudersana Traders
SRI SIMHADRI COMPANY
TANEESH CONSTRUCTIONS
M/s Harjas Construction & Waterproofing Co
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .