S u p p l y , E r e c t i o n a n d Commissioning of New 25HP Pump with Motor at New Lift Irrigation Scheme at Erattadi in Pandalam

Amount

Supply,Fabrication and errection of MS pipe, Flange etc at New Lift Irrigation Scheme at Erattadi in pandalam Muncipality. Mechanical work.

OD24698/2023-2024:Supply of 300 mm dia MS heavy class pipe of min. 6.35 mm thick

OD24699/2023-2024:Supply of MS flange of OD 445 mm for 300 mm MS pipe

OD24700/2023-2024:Supply of 90 degree 300mm dia bend with ISI specification including all cost of material, conveyance etc. complete

OD28560/2023-2024:Fabrication of MS eccentric reducer for 300mm to suitable size including cost of material, conveyance etc. complete

OD24704/2023-2024:Supply of MS concentric enlarger for size 300mm to suitable size including cost of all material, conveyance etc. complete

OD24705/2023-2024:Supply of 300mm dia C.I Non Return Valve of good quality including all cost of conveyance, materials etc. complete

OD24706/2023-2024:Fixing the 300 mm C.I Non Return Valve to 300 mm MS pipe

18.31.6.2:Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately): 300 mm diameterClass II

OD24707/2023-2024:Supply of Bolts and Nuts with washer of various sizes

OD24709/2023-2024:Supplying Banyan Waste

OD24710/2023-2024:Supply of 5T chain block with pulley including cost of conveyance, labour charges etc. complete

OD24711/2023-2024:Supplying Water tank of 80 ltr. capacity etc. complete

OD24713/2023-2024: Erection of 3HP vacuum pump andSupply and providing PVC fittings including elbows, couplings, reducers, brass nipples, tank connector etc. for vacuum pump connections to the pump

OD24714/2023-2024:Supply of Rubber Insertion sheet to prevent the leakage through the joints in between two flanges and cutting to size, drilling and fitting in correct position etc. including cost of material, labour charges etc. complete

OD24715/2023-2024:Conveyance of Pump assembly and pipes to work site as directed by the department officer at site

OD24716/2023-2024:Erecting the pump and motor on the foundation basement in proper alignment including the cost of all labour etc. complete as per the direction of officers at site

OD24717/2023-2024:Cutting holes in the existing Pump House building to facilitate easy passage of suction and delivery pipes

OD24718/2023-2024:Setting Vacuum Pump in correct alignment including setting pipe lines, valve fittings etc. complete

OD24719/2023-2024:Erection of 300 mm MS pipes including specials and fittings after conveying them within initial lead and carefully placing in alignment and levelling ,welding flanges in correct alignment after necessary cutting ,grinding, edge preparation etc.

OD24720/2023-2024:Supplying and fixing strainer of suitable size to the bottom of the suction side MS pipe line to protect from entry of weed and other materials in to the pipe line, including cost of material conveyance etc. complete

85.115:Cost of painting with 2 coats of enamel paint over 1 coat of zinchromate primer as per IS1477:1994 after hand and power tool cleaning including cost of all materials, labour charges, cost of testing all painting materials, all incidental charges, hire of T&P etc. complete as per the direction of department officers at site

4.1.11:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size)

OD24721/2023-2024:Conducting trial run of the pump and vacuum pump and providing provision for 100/125 KVA generator

Bidder Name

R K BABU