S.R. to office of the Dy. Executive Engineer at Bodeli Sub Division, Bodeli Ta. Bodeli Dist. Chhotaudepur (Renovation of Compound wall gate & Security cabin work)

No. figures

1 Dismentling steel work including distempering and stacking the 329.00 Kg. 3.94

materials with all lead and lift.

2 Demolition of brick work and stone masonry including stacking of 10.00 Cum 576.30

serviceable materials and disposal of unserviceable materials with all

lead and lift. (ii) In Cement Mortar.

3 Dismentaling the existing structure including removing and stacking 12.00 Cum 952.51

the dismentelled materials as and where directed. (A) R.C.C. work.

4 Excavation for foundation upto 1.50 mt depth including sorting out 10.00 Cum 125.86

and stacking of useful materials and disposing the excavated stuff for

all lead and lift for all sorts of soil.

5 Providing and laying cement concrete 1:4:8 (1 cement : 4 coarse 2.00 Cum 2781.12

sand : 8 stone aggregate 40 mm nominal size) and curing complete

excluding cost of form work in foundation and plinth.

6 Providing and laying controlled cement concrete M-200 and 2.00 Cum 4650.04

finishing smooth with curing etc. complete including the cost of form

work but excluding cost of reinforcement for R.C.C. work in

foundation, footings, base and column.

7 Providing and laying controlled cement concrete M-200 and 0.18 Cum 5997.38

finishing smooth with curing etc. complete including the cost of form

work but excluding cost of reinforcement for R.C.C. work in plinth

8 Providing and laying controlled cement concrete M-200 and 2.00 Cum 8503.19

finishing smooth with curing etc. complete including the cost of form

work but excluding cost of reinforcement for R.C.C. work in Column

for Ground floor.

9 Providing and laying controlled cement concrete M-200 and curing 1.00 Cum 6257.57

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Beams for all floors.

10 Providing and laying controlled cement concrete M-200 and curing 1.00 Cum 8832.46

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Lintels for all floors.

11 Providing and laying controlled cement concrete M-200 and curing 1.00 Cum 6754.84

complete including the cost of form work but excluding cost of

reinforcement for reinforced concrete work in Slab for all floors.

12 Providing I.S.I. mark T.M.T. bar Fe-500D reinforcement for RCC 2495.00 Kg. 77.29

work including bending, binding and placing in position upto floor two

level for Ground floor.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

13 Providing and laying brick work using common burnt clay building 1.00 Cum 4568.40

conventional type bricks having crushing strength not less than

Kg./Sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement

: 6 fine sand) including the cost of all materials and labour charges

etc. complete.

14 Providing and laying half brick work using common burnt clay 15.00 Sq.m. 696.50

building conventional type bricks having crushing strength not less

than 35 Kg/Sq.cm in super structure above plinth level upto floor two

level in cement mortar 1:4 (1 cement : 4 fine sand) for all floors

including the cost of all materials and labour charges etc. complete.

15 Providing 15 mm thick cement plaster in single coat on fair side of 43.00 Sq.m. 253.61

brick / concrete walls for interior plastering upto floor two level

finished even and smooth in cement mortar 1:3 (1 cement : 3 sand)

finishing with a floating coat of neat cement slurry including making

groove interior plastering above floor two level for Ground floor.

16 Providing and laying marble slab polished granite stone 20mm to 4.00 Sq.m. 3246.14

25mm thick black (single piece) for vertical wall / Doors /

Windows sill, jambs for cladding as per design including full

moulded round inside edge and laid in 10 mm thick cement mortar

1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry

including rubbing, polishing and finishing etc. complete.

17 Providing and laying 60cm x 60cm GVT (Glossy Vitrified Tiles) 5.00 Sq.m. 1521.95

flooring laid on a bed of 12 mm thick cement mortar 1:3 (1 cement :

3 coarse sand) and jointed with color cement slurry including finished

with flush pointing & cleaning the surface. Pattern, Colour and shade

approved by Architect or Engineer in-charge etc. complete.

18 Providing and fixing M.S. Grill of required pattern to wall frame of 320.00 Kg. 119.18

windows etc. with 16 mm dia. of polished bar at required spacing and

frame of M.S. flat of all round with necessary hold fast and fixing

under marble including cutting, groove in marble and filling grove with

including applying priming coat and two coats of painting etc.

19 Providing and fixing Door of factory made & stamped I.S. 12823 5.00 Sq.m. 3975.36

grade one, type one 35 mm thick solid core, melamine faced, three

layered resin, flushed door, having decorative lamination on both side

including 30 cm long stainless steel pipe handle on both side SS

ASIS 304 Grade, SS stopper 20 cm, SS Aldrop 30 cm both side, SS

hinges 3 Nos. in each shutter & fixtures & fastenings as directed by

Engineer in charge etc. complete.

It. Rate in

Description of Item Qty. Unit Amount

No. figures

20 Providing and fixing window having extruded aluminum colour 4.00 Sq.m. 1713.70

anodized section frame main outer size 63.50 x 38.10 x 1.95 mm (@

Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (@ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (@ wt.of 0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm x 1.29mm (@ wt.

of 0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29mm

(@ wt. of 0.456 Kg/mt. & @ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminum fittings and fixtures and transparent silicon sealant glass

fixing to frame as per details etc. complete for window.

21 Painting two coats (excluding priming coat) on new steel and other 10.00 Sq.m. 94.39

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface of all dirt, dust and other foreign

22 Wall painting (two coats) with plastic emulsion paint of approved 19.00 Sq.m. 134.04

brand and manufacture on ceiling and soffits of slab surface to give

an even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered smooth.

23 Finishing wall with weather proof acrylic emulsion paint of 24.00 Sq.m. 122.14

approved brand and manufacture of required shade on exterior wall

surface to give an even shade over and including a primary coat with

alkali resistance primer of approved brand after thoroughly brushing

the surface to remove all dirt and remains of loose powdered

materials etc. complete for all heights.

24 Point wiring for Light / Fan / Bell / Primary point with 2 - 1.5 sq.mm. & 19.00 Pt. 354.51

earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 kv grade

FRLS PVC insulated multi strand copper wires upto max. length of

mt., in below type of pipe erected with 6A Tissino type ISI marked

flush type switch / bell push and accessories erected on Metal / PVC /

Wooden box covered with 3mm thick PC (Polycarbonate) / Acrylic /

Laminated sheet with necessary lamp holder / ceiling rose / H.D.

connector as directed. (a) with medium class Rigid PVC pipe and

accessories erected flushed on wall / ceiling complete.

25 Supplying and erecting approved make of tube fitting with one no. T-5 5.00 Each 480.76

tube 24/28 W with Electronic ballast with each tube separately THD

less than 10 & built in adeptors, GI / PVC housing & mirror optic

reflector, suitable to work on 120V - 300V, A.C. supply with connector

and adapter if required. [Make of fitting & tube may be differ & fitting

shall be providing with tube].

26 Providing and erecting heavy duty flood light integral luminaire 7.00 Each 2311.89

comprises die cast alluminium body with heat resistant toughened

front glass, silicon rubber gasket, anodized reflector hot deep powder

coated cradle clamp with suitable size of necessary built in control

gear complete with lamp.

27 Providing and erecting approved make Ceiling fan with double ball 2.00 Each 2311.89

bearing ISI mark with Condenser 230 volt A.C., 50 Hz 1200mm

sweep complete having 3 blades alluminium body and blade sets

having ornamental design shanks, canopy erected with earthing.

[Make shall be approved by Engineer in charge].

It. Rate in

Description of Item Qty. Unit Amount

No. figures

28 Providing and fixing precast concrete kerb stone of grey cement 79.00 Rmt. 413.84

based concrete block 30 cm length, 30 cm height and 15 cm thick of

M-200 grade concrete as per approved design and including

excavation for fixing in proper line and level, filling the joints with C.M.

1:3 (1 cement : 3 fine sand) etc. complete.

29 Providing, fixing Cattle Trap including horizontal support at bottom of 10.00 Sq.m. 5575.20

hollow pipe 100 x 60 x 6.3mm and circular pipe at top of 80mm dia.

with hollow section and painting with two coats of oil paint including

priming coat, fabrication work including cutting, welding, making holes

by drilling machine & fixing in line and level of all structure including

cost of all laboures, fixtures, fastening and equipments etc. complete.

Total Rs.

i.e. Rs. Five lacs Three thousand Five hundred Seventy Eight and Fifteen paisa only.

I/We am/are willing to carry out the work @ _______ __ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

Net Rs. ___________________________ Total Rs. ____________________

In words ____________________ In words ____________________

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-

In-Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there

is a change as per actual mix design the cost of difference of cement consumption have been deducted from

the rate of original item at the rate of input rate mentioned in all the tender.

5. Credit for dismantalled materials of amount of Rs. 3000.00 must be recovered from 1st R.A. bill of

Contractor's.

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me

and found order.

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Bodeli (R & B) Sub Division, Chhotaudepur (R & B) Division, Chhotaudepur (R & B) Division,

Bodeli Chhotaudepur Chhotaudepur