E-TENDER FOR CIVIL, INTERIOR AND FIRE FIGHTING WORKS

Amount

CIVIL WORKS, INTERIOR & FIRE FIGHTING

Supplying, installation, testing and commissioning of electric driven terrace pump 450 lpm at 35 m Head suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class-'F' insulation, conforming to IS-325. (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads.

Supplying, installation, testing and commissioning of Starter Panel for n Nos. electric driven terrace pump suitable for automatic operation complete in all respects, as required: (Terrace Pump)

Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 25MM DIA

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80MM DIA

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 MM DIA

Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150MM DIA

Supplying and fixing single headed Stainless Steel internal hydrant valve with instantaneous Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Stainless Steel cap and chain as required :

Supplying and fixing Single headed Stainless Steel external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Stainless Steel cap and chain as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80MM DIA

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 MM DIA

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 150MM DIA

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80MM DIA

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100MM DIA

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150MM DIA

Supplying, Fixing, Testing & Commissioning of Rubber Bellow of PN 1.6 rating complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. 80MM DIA

Supplying, Fixing, Testing & Commissioning of Rubber Bellow of PN 1.6 rating complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. 100MM DIA

Supplying, Fixing, Testing & Commissioning of Rubber Bellow of PN 1.6 rating complete to the entire satisfaction and direction of Fire Officer/Engr-in-Charge. 150MM DIA

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 150MM DIA

Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. 80MM DIA

Supplying and fixing STAINLESS STEEL 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :

Supplying and fixing 30 meter long first-aid Hose Reel with MS construction spray painted in post office reqd, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing STAINLESS STEEL 63 mm dia short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required :

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects.

Supplying and fixing of Drain test assembly as reqd. for suitable dia MS pipe connection conforming to IS code as required :

Supplying and fixing of Fire Man's Axe with heavy insulated rubber tested upto 20 KV and confirming to IS :926.

Providing and fixing 25 mm nominal bore metal ball Valve with rotatory handel of approved quality.

Providing and fixing 25 mm Air Release Valve with of approved quality.

Providing and fixing Fire Hose Cabinet door including door frame (Internal) fabricated from 16 gauge Alluminium Sheet powder coated with glazing above and below lock rail in front door with key and lock arrangement, painted "Fire Red" with powder coated paint "Fire Hose" written on front including suitable supports to place, approximately size (minimum) 1200x2100 mm or as per site suitable to house following; (i) Single Headed Outlet - 1Nos. (ii) First Aid Hose Reel - 1 No. (iii) Hose pipe 63 mm dia 15m long with male and female coupling at both ends. - 2 Nos. (iv) Branch pipe 63 mm dia - 1 No

Supplying and fixing of Fire Hose Cabinet (External) 900mm x 600 mm x 500 mm made of 2mm thick MS sheet with 6 mm thick glazed glass doors i/c necessary locking arrangements suitable to accommodate external yard hydrant with butterfly valve, 2Nos. 15mtr.long Hose pipe, 1No. branch pipe, mounted on wall OR raised brick platform & duly painted with post office red externally and white internally with synthetic enamel paint complete in all respect, for external hydrant, as required.

Supplying and fixing of ISI marked 6 KG ABC type fire extinguishers of following capacity ISI marked (IS: 15683) filled with MAP 90% stored pressure type ABC powder with jet pipe of standerd length comprising of easy snap safety seal, State of the art pressure gauge, Controllable discharge mechanism , Instalert, EPDM rubber hosepipe , squeeze grip valve, painting, clamp and dash fastners complete in all respect as required. 6 KG. (Make:- Guards, Kanex, Ceasefire)

Supplying and fixing of 4.5 KG CO2 type fire extinguisher of following capacity ISI marked as per IS 15683,CO2 cylinder as per IS 7285 CCE approved, valve as per IS 3224,CO2 gas as per IS 307,Internal discharge tube as per IS 738 complete with wheel discharge valve, hose and horn duly charged with CO2 gas i/c fixing with bracket on existing wall complete as reqd. 4.5 Kg (Make:- Guards, Kanex, Ceasefire)

Supply, Installation and programming of Microprocessor based conventional Fire Alarm Panel , 4 ZONE. Make: System Sensor/AGNI/Ravel/Apollo

Installation of MCP (Manual Call Point ). Make :system sensor/ AGNI/ Palex / Apollo

Installation of Hooter (Make: system sensor / AGNI / Palex)

Supply & Installation of optical Smoke Detector/Heat Detector/Multicriteria Detector. Make: System Sensor/Apollo/AGNI

Supply and laying of 1.5mm 2core Red Coloured Fire Alarm Cable on surface for detection system with all required accessories. (Make: Polycab / Havells/ Finolex )

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. a) In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors and roofs laid in cement mortar and cleaning the sub-surface for re-tiling including stacking material within 50 metres lead. a) For thickness of tiles 10 mm to 25 mm

Dismantling existing wall tile & plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling steel work in builtup / hollow sections including dismembering and stacking within 50 metres lead

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area above 3 sq. metres

Demolishing mud phaska in terracing and disposal of material within 50 metres lead.

Dismantling of Sanitary fittings and fixtures & Electrical wiring, fittings, fixtures & switch sockets for single storey building (Sports room) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge

Dismantling of existing sanitary fittings in and fixtures including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. ( Gents Toilet at Ground Floor Admin Block / Library Toilet/ Computer Lab Toilet )

Dismantling existing Masonary Planters near the open air auditorium including removal of good earth from the planters before demolishing the planters and stacking it at an approved location within 50 meters lead and disposal of malba to the dumping ground within 50 metres lead.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, as directed by Engineer-in charge. a) All Kinds of Soil and Ordinary rock

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations , floor etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-At All levels : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying cement concrete in Platform, retaining walls, return walls,walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:1½:3 (1 cement : 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20 mm nominal size).

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto all lvl. Thermo-Mechanically Treated bars. (TATA , SAIL, RINL, JSW)

Centering and shuttering including strutting, propping etc. and removal of form for all works at all levels: Foundations, footings, bases of columns, Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Suspended floors, roofs, landings, balconies and access platform , Lintels, beams, plinth beams, girders, bressumers and cantilevers, Columns, Pillars, Piers, Abutments, Posts and Struts, Stairs, (excluding landings) except spiral-staircases, Weather shade, Chajjas, corbels etc.,including Edges of slab and breaks in floor & wall

RE-BAR WORK : Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using HILTI RE500 epoxy resin anchor grout but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.: 10 mm dia

RE-BAR WORK : Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using HILTI RE500 epoxy resin anchor grout but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. :12 mm dia

RE-BAR WORK : Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using HILTI RE500 epoxy resin anchor grout but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge. :16 mm dia

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. a) In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Structural steel work riveted, bolted or welded in built up sections, tubular sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Brick work with common burnt clay F.P.S. (non modular) Red bricks of class designation 7.5 in foundation and plinth in:: Cement Mortar 1:6 (1 cement : 6 coarse sand).

Brick work with common burnt clay F.P.S. (non modular) Red bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) Red bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 ( minimum 2mm thick aluminium section of Jindal/Hindalco only) For Fixed Portion: Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15). Flush Door Frame shall be made from 3mm thick single patam aluminium frame.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : a) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15 ( minimum 2mm thick aluminium section of Jindal/Hindalco only) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket etc. complete (minimum 2mm thick aluminium section of Jindal/Hindalco only) Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (excluding Cost of aluminium snap beading ): a) 6 mm thick clear heat strengthened glass (Toughened Glass)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Upto 5mm depth and 5 mm width

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands finished with 1mm thick Laminate on both faces of shutter : (Flush door only of Duro / Green/ Century/ Virgo make and laminate only of Merino, Sundek, Century, Duro make) 35 mm thick including ISI marked 4 no's 4 inch long Heavy Duty Stainless Steel butt hinges (butt hinges of ebco, hettich, ozone make only) with necessary SS screws complete

Extra for providing melamine polish finished C.P. teakwood lipping size 35 mm x 18 mm size on all four edges of flush door shutters (over all area of door shutter to be measured).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to wooden frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand:6 graded stone aggregate 20 mm nominal size).

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 60 kg and door width upto 1100 mm), with necessary accessories and screws etc. complete.( godrej, hettich, ozone make only)

Providing and fixing bright finished brass handles with screws etc. complete: (GODREJ/ EBCO / HETTICH Make only) a) 125 mm

Providing & Fixing 12mm HPL Board Toilet Partition as per approved color with all necessary Accessories: Standard – Stainless Steel a) SS Adjustable Leg b) SS Coat Hook c) SS Door Knob d) SS Lockset with indicator e) SS Hinge f) SS U channel g) SS Toprail h) SS Door stopper Channel j) Screws & Wall Plugs k)Noise Deafening tapes for grooves in doors & Pilasters ( Approved Makes : Greenlam Sturdo Series/ Merino Titan Standard Series/ Stylam Cuboid Series )

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge Including the cost of painting with : 12.5 mm thick tapered edge gypsum moisture resistant board

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS:2095 part I, of size 2'x2', having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Heavy Duty T GRID OF - India Gysum 12mm thick high NRC Ceiling Tile of Armstrong , India Gypsum or Gyproc Make .

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit. Ceiling Tile of Armstrong , India Gypsum or Gyproc Make .

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200 x 600 mm and secondary cross "T" of length 600 mm and size 24 x 25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200 x 600 mm panel to form grids of 600 x 600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm centre to centre along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non-woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. Ceiling Tile of Armstrong , India Gypsum or Gyproc Make .

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade. To be fixed on existing MS Frame.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for Flooring, kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Area of slab over 0.50 sqm Granite of any colour and shade (Basic cost Rs. 150 per sqft )

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of Size of Tile 600 x 1200 mm (APPROVED MAKES: SOMANY/ KAJARIA/ ASIAN/ RAK ))

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. Basic Cost of Tile Rs. 65/-. Size: 600 x 300 (APPROVED MAKES: SOMANY/ KAJARIA/ ASIAN/ RAK )

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints not to be made separately). a) Size of Tile 600x1200 mm (APPROVED MAKES: SOMANY/ KAJARIA/ ASIAN/ RAK )

Providing & fixing in position Phenol bonded Bamboo wood flooring with planks of sizes 14mm thick, 1800mm length (minimum) and130 mm wide(minimum), in approved colour, texture and finish, having Performance Appraisal Certificate (PAC) issued by Building Materials & Technology Promotion Council (BMTPC). The flooring shall be fixed with tongue and groove interlocking system, with underlayment of 4mm thick expanded poly ethylene foam sheets having density 40kg/cum, over prepared surface with necessary quarter round planks of size 1900mm x 18mm and door reducer of size 1900mm x 44mm, wherever required. The bamboo wood planks shall have minimum density of 1000 Kg/cum & minimum Hardness 1000 Kgf. with Eco friendly UV coating, all complete as per direction of Engineer in-charge.

Extra for providing opening of required size & shape for wash basin/kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete

Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75mm deep chase

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with sealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,including inlet mouth & PVC pipe clips. Complete including all T, BEND, SOCKET, COWL, Etc. as required. (i) Single socketed pipes. A)110 mm diameter

BRICK COBA WATER PROOFING AS PER DSR 22.7.1 With average thickness of 120 mm and minimum thickness at khurra as 65 mm.

SHEET ROOFING WORK: Providing & fixing at all heights, levels and locations colour finish Aluminium alloy roofing sheets of alloy IS designation 31500, temper Hx8 conforming to IS 737 and dimensions as per IS code 2676 with characteristics of good formability and corrosion resistance. The profile sheets shall be fixed to truss/Frame members in slope or required pitch or curvature with Hex cap headed self-drilling/tapping Stainless steel screws M6, 50 mm long with 3 mm EPDM seal washer etc. all inclusive of labour, scaffolding, T&P and sundries etc. complete as per directions of the Engineer-In-Charge. (Cost of truss/framework shall be paid separately). 0.71 mm, Aluminium Color coated troughed profile with center to center pitch of 200 mm, depth of 32 mm, overall profile width1092 mm, cover width 1000mm. Approved makes: JSW COLOURON PLUS, TATA BLUESCOPE, HINDALCO EVERLAST.

ACP SHEET CLADDING: Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete.0.80 mm thick with zinc coating not less than 275 gm/m²

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Flashings/ Aprons.( Upto 600 mm)

12 mm cement plaster of mix (Brick work shall be provided with GI chicken wire mesh 300mm on either side of the Brick & Concrete Joint before plastering) 1:3:3 (1 cement: 3course sand: 3 fine sand)

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand). (Brick work shall be provided with GI chicken wire mesh 300mm on either side of the Brick & Concrete Joint before plastering).

6 mm cement plaster 1:3 (1 cement : 3 fine sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams.

External painting works: External painting works at all heights and levels as per procedure mentioned including 1) Surface preparation (scrapping, sanding, cleaning). 2) A liberal coat of Wall Primer as per manufacturers specification. 3) Painting 2 or more coats of Exterior Weather Proof Paint in various colors (Asian/ ICI /Shalimar/ Berger/ Nerolac). 4) Horizontal surfaces like the tops of chajjas and parapets must be given an additional coat for greater protection. Contractor’s scope includes all materials, tools & plants, paint brushes & rollers of approved makes, ropes, lifts, ladders, safety equipment’s, scaffolding and all other equipment’s as may be required to complete the works successfully. (The rates include all labour, materials and items of work required to complete the work successfully up to the satisfaction of the owner)

Internal painting works: Internal painting works at all heights and levels as per procedure mentioned including 1) Surface preparation (scrapping, sanding, cleaning) 2) One coat of Wall Primer as per manufacturers specification 3) Coat of White cement based putty (JK/BIRLA) 4) One liberal coat of wall primer over wall putty 5) Painting 2 or more coats of Premium acrylic emulsion of interior grade, having VOC content less than 50 grams/ litre in various colors (Asian/ ICI /Shalimar/ Berger/ Nerolac). Contractor’s scope includes all materials, tools & plants, paint brushes & rollers of approved makes, ropes, lifts, ladders, safety equipment’s, scaffolding and all other equipment’s as may be required to complete the works successfully. (The rates include all labour, materials and items of work required to complete the work successfully up to the satisfaction of the owner)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work

Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective ofduration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.

Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer?in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength not less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four nos longitudinal & 9 nos cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge.

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge : 25 mm average thickness.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make.

Providing and laying 150mm thick Cement Concrete Road of M-25 grade using vacuum dewatering flooring system. Road shall be laid in panels to desired slope. Vacuum dewatering Process shall be executed using Trimix/Dynapack or equivalent approved machines. The process shall consist of laying concrete in alternative panels of area not more than 48 square metres each by placing side form channels to true & Proper level on cement concrete by at least two passes of screed vibrator followed by the leveling beam. Vacuum dewatering shall be done to reduce water cement ratio by 15-20%.After Vacuum dewatering the surface to be power floated with skim floater. Rates shall be inclusive of: a) Making groove of size 6mmX40mm and filling the grooves with backer rod and sealing with polysulphide/sika compound for internal floors including polish. Panel size not to exceed 48 sqm b) Mixing of propriety hardener of sika or fosroc Make c) Making of saucer drain along the length of the road on one side of the road. d)All the shuttering form work, Labour, Material, equipments, tools and plants required to complete the work upto the satisfaction of the engineer in charge.

Providing sand stone slab for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 coarse sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately), including pointing the joints with cement mortar 1:3 (1 cement : 3 fine sand ) complete : Red sand stone slab a) 40 to 50 mm thick

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Wiring for the light points with 1.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 16 gauge MS Conduit including providing and fixing of 6 amps single pole modular switch of approved quality colour make & design in 1.6 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. (including circuit wiring from DB to switch Board) : Primary point

Wiring for the light points with 1.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires of approved make in concealed or surface mounted 25 mm dia 16 gauge MS Conduit including providing and fixing of 6 amps single pole modular switch of approved quality colour make & design in 1.6 mm thick GI box and earthing of fixtures and the outlet box with 1.5 sq.mm PVC insulated copper conductor stranded flexible "FRLS" wire. (including circuit wiring from DB to switch Board) : Secondary point

Wiring for Exhaust fan point with 1.5 sq. mm. insulated copper conductor 1100 volts grade stranded flexible "FRLS" wires of approved make in concealed or surface mounted 25 mm dia 16 guage MS Conduit including providing and fixing of 6 amps flush mounted switch at the normal switch level in 2 mm thick GI box and 6 amps 3 pin flush mounted socket near exhaust fan and earthing of exhaust fan through the third pin of the socket outlet and GI box with 1.5 sq. mm. PVC insulated copper conductor flexible "FRLS " wire.

Wiring for 250 volts single phase and neutral 16 amps modular switch socket outlet with universal pins with 3 x 4 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wire in concealed or surface mounted 25 mm dia 16 gauge MS conduit / existing raceway including providing and fixing of 16 amps 3 pin modular switched sockets of approved make and design in 1.6 mm thick GI box with grid plates and earthing the third pin of each socket outlet with 4 Sq mm PVC insulated copper conductor stranded flexible "FRLS" wire. (including circuit wiring from DB to switch Board): Primary point for 16 amps switched socket outlet)

Wiring for 250 volts single phase and neutral 6 amps modular switch socket outlet with universal pins with 3x2.5 sq.mm PVC insulated copper conductor 1100 volts grade stranded flexible "FRLS" wire in concealed or surface mounted 25 mm dia 16 gauge MS conduit / existing raceway including providing and fixing of 6/16 amps 3 pin modular switched sockets of approved make and design in 1.6 mm thick GI box with grid plates and earthing the third pin of each socket outlet with 2.5 Sq mm PVC insulated copper conductor stranded flexible "FRLS" wire. Primary point for 6 amps switched socket outlet

Providing and fixing in position the following 2mm thick PVC rigid conduits concealed or exposed as called for including all accessories i.e. bends, junction boxes, with cover plates of approved make and design. 20 mm dia PVC conduit FRLS grade. Sample to be approved by Engineer Incharge.

Providing and fixing in position the following 2mm thick PVC rigid conduits concealed or exposed as called for including all accessories i.e. bends, junction boxes, with cover plates of approved make and design. 25 mm dia PVC conduit FRLS grade. Sample to be approved by Engineer Incharge.

Supplying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification. 4 core 16 sq.mm

Supplying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification. 4 core 6 sq. mm

Supplying of following 1100 volt grade XLPE insulated PVC sheathed copper conductor armoured cable as per specification. 3 core 6 sq. mm.

Supply, installation, testing and commissioning of the following cubicle type 1.6 mm thick CRCA sheet steel enclosed and partitions to segregate phases recessed in wall or surface mounted final distribution boards of the following description. Distribution board shall be powder coated and double door construction and in four tier configuration. 6 way TPN DB with 12 No 10/16/20/32 amps SP MCB as outgoing and 3 No. 32 amps DP RCCB’s of 100 mA leakage current including 1 No. 16 amps 4 Pole MCB as incomer & separate neutral link for each phase and earth bar.

Supplying, fixing, testing and commissioning of 8 SWG GI wire including all necessary fixing accessories and effecting connections.

Chemical Earthing with 3mtr. long 250 Microne Copper bonded UL listed Rod including accessories and providing masonary enclosure with cover plate having locking arrangement and 50Kg. Chemical etc as required.

Providing and fixing 25mm x 5 mm G.I strip on surface or in recess for connections etc. as required.

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. Supply, installation, testing and commissioing of Propeller fan upto 300 mm sweep of approved make complete with louvars and all accessories as required.

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. 36 watt 600mmx600mm recess/surface made of Steel sheet body with power coating of required colour complete as required. (Philips Essential full glow 2x2 Panel 36w RC360B LED36S Neutral White 4K- Or approved equivalent from Wipro or Osram)

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. ( Crompton/ Havells/ Bajaj make only )

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. Supply of 1200 mm long 22 watt LED luminiare (Philips Mirolta Essential 22W LED Batten Or approved equivalent from Wipro/ Osram)

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. SITC of Recessed mounted 15 watt LED down lighter made up of high pressure die cast aluminium housing complete as required. (Havells INTEGRANEODLR12WLED840S or approved equivalant from Wipro/Philips/ Osram)

Supply, installation, testing and commissioing of the following lighting fixtures and fans with all fixing accessories etc. as required. IP 66 10 watt LED Bulk Head Luminarie made up of high pressure die cast aluminium housing with polycarbonate cover having symmetric optics with minimum 600 lumens output system (Equivalent to Havells HEXAFT10WLED857SSYMBOPC or approved equivalant from Wipro/Philips/ Osram)

Providing and fixing white vitreous china extended wall mounted water closet of size 620X 355X745mm of approved shape including providing and fixing of white vitreous china cistern with dual flushing fitting of flushing capacity 3 liter/6 liters (Adjustable to 4liter/8liters) including sheet cover , and cistern fittings, nut bolt gasket etc complete. Wall hung EWC (CERA: CALLAGHAN: Cat No. : S1031104 . Two Piece Wall Hung Extended EWC Cat. No. S1060104 Cistern Cat. No. B1510101 Carina seat cover Cat. No. B1810107 Twin flush fittings or approved equivalant from Hindware/ Parryware)

Providing and fixing wash basin with C.I. Brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls whereever require : Providing and fixing Round Washbasin CERA OVAL Cat No. :S2030104 Counter wash basin 560 x 470 x 190 mm or approved equivalent, BOTTLE TRAP Cat No. : F8060101 Bottle Trap 150 mm, CHELSEA PILLAR COCK Cat No. : F1016101 : Pillar cock with aerator or approved equivalant from Hindware/ Parryware )

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin, wc points of approved quality conforming to IS:8931 (CERA : CHELSEA Range ) 15 mm nominal bore (or approved equivalant from Hindware/ Parryware)

Bib Cock: Providing and fixing in position 1 Way bib cock C.P. brass to IS:8931 (CERA : CHELSEA Range ) (or approved equivalant from Hindware/ Parryware)

Providing and fixing toilet paper holder of approved quality conforming to IS standards. (Make : CERA/ Hindware/ PARRYWARE

Providing and fixing of CP brass Health faucet for wc with 8mm dia 1.25mtr. Long pipe and wall hook fixed to wall with rawl plug and CP brass screws complete.(CERA/ Hindware/ PARRYWARE )

Providing and fixing white vitreous china flat back half stall urinal with white consealed P.V.C flushing cistern with pressmetic valve of hindware make , with fittings, standard size concealed pipe, spreaders with unions and clamps (all in C.P brass) with waste fitting as per IS : 2556, C.I trap with outlet grating and other coupling in C.P brass including painting of fittings and cutting and making good the walls and floors whereever required (Make :CERA CALORIGO Cat No. : S4020114 Urinal 310 x 300 x 555 mm) (or approved equivalant from Hindware/ Parryware)

Providing & fixing TOUGHENED GLASS HINDWARE WALL HUNG URINAL DIVISION 450 X 900 MM X 8 mm SU81OSC(C)-STD-CR

Providing and fixing automatic soap Dispenser Kimberly-Clark Professional® Aquarius® Skin Care Dispenser (69480), Hand Soap and Sanitiser Dispenser, 1 Dispenser / Case AQUARIUS® PRODUCT CODE #69480

Providing and fixing 350mm bottle trap without drain in polished chrome of approved quality & make and as per the direction of Engineer- in-charge. (CERA/ Hindware/ PARRYWARE )

Floor Trap / Drain: Providing and placing in position Cockroach Floor Trap / Drain in nickel bearing stainless steel compliance to Hindware/ Kohlar make floor drain cover consisting of grating frame, inner filter and outer filter of apropriate size as per approved by site incharge / consultant compleate as required

Providing and fixing PTMT angle stop cock 15mm nominal bore,weighting not less than 85gms.

Providing and fixing white vitreous china Janitor sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P. brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required: NK SB1 M SIZE: 610 X 460 X 255

Providing Fixing approved make wall mounted shower mixer with provision for Shower head (Hindware/Allied Cat No. F160103CP) with long bend pipe, shower arm, rose, C.P Flanges & connecting pipe including cutting & making good wall / RCC complete in all respect.

Wall Cladding of Gym Wall with 25mm water proof plywood of Duro/Green/Virgo fixed to the wall in absolute line and level for fixing 6mm Toughened Glass mirror using Silicon of suitable grade complete upto satisfaction of engineer incharge including all labour and materials.

Providing and fixing 6mm thick toughened glass mirror of size 900mm x 1200mm including making suitable holes in the mirror for fixing and mounting the mirror on the wall with suitable Stainless steel mounts of approved makes complete upto the satisfaction of the engineer incharge.

Soil Waste & Waste Water: Providing, placing in position and fixing Multilayer SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 on elevation [vertical wall cladding / stacking] of approved make of following diameter.The fittings / pipe shall be noise free or offering sound levels not more than 19 dBA. 110mm dia nominal outer diameter

Soil Waste & Waste Water: Providing, placing in position and fixing Multilayer SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 on elevation [vertical wall cladding / stacking] of approved make of following diameter.The fittings / pipe shall be noise free or offering sound levels not more than 19 dBA. 50mm dia nominal outer diameter

Soil Waste & Waste Water: Providing, placing in position and fixing Multilayer SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 on elevation [vertical wall cladding / stacking] of approved make of following diameter.The fittings / pipe shall be noise free or offering sound levels not more than 19 dBA. 40mm dia nominal outer diameter

Soil Waste & Waste Water: Providing, placing in position and fixing Multilayer SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 on elevation [vertical wall cladding / stacking] of approved make of following diameter.The fittings / pipe shall be noise free or offering sound levels not more than 19 dBA. 32mm dia nominal outer diameter

Soil, Rain & Waste Water Pipe on Ground Floor: Providing, placing in position and fixing SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 resting in plan on 75mm thick and 250mm wide in cement concrete [1:2:4 mix (1 cement : 2 coarse sand : 4 stone aggregate of 10mm and down size)] bed and all around encasing, plastering with 1:3 cement mortar, back filling the excavated earth, watering, ramming complete and on elevation [vertical wall cladding / stacking] of approved make with gradient between 1 in 40 to 1 in 110 in plan as the case of following diameter. 160mm dia nominal outer diameter

Soil, Rain & Waste Water Pipe on Ground Floor: Providing, placing in position and fixing SWR pipe Type-B Compliance to IS - 13592 with rubber ring and SWR fittings [coupler, sand @45, bend with door, doubly, single tee, reducing tee, reducing coupler, singley, door cap, single tee, double tee, rubber ring extra, offset band, pipe clamp] Compliance to IS : 14735 resting in plan on 75mm thick and 250mm wide in cement concrete [1:2:4 mix (1 cement : 2 coarse sand : 4 stone aggregate of 10mm and down size)] bed and all around encasing, plastering with 1:3 cement mortar, back filling the excavated earth, watering, ramming complete and on elevation [vertical wall cladding / stacking] of approved make with gradient between 1 in 40 to 1 in 110 in plan as the case of following diameter. 110mm dia nominal outer diameter

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.160 mm

Providing & fixing square mouth S.W Gully Trap & Catch Basin class SP-1 complete with C.I gratting brick masonry chamber with water tight C.I cover with frame of 300x300mm size (inside) the weight of cover to be not less thn 4.50 kg and frame to be less than 2.70 kg as per standard design :

Constructing brick masonry manhole in cement mortar 1:4 (1 cement : 4 coarse sand ) with R.C.C top slab with 1:2:4 mix (1 cement :2 coarse sand :4grade stone aggregate 20 mm norminal size) foundation concrete 1:4:8 (1 cement :4 coarse sand :8 grade stone aggregate 40 mm norminal size) inside p lastering 12 mm thick with mortar 1:3(1 cement : 4 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4)1 cement :2 coarse sand :4grade stone aggregate 20 mm norminal size) finished with a floating coat of neat cement complete as per standard design : Inside size 900x800 mm and 45 cm deep including CI cover with frame (light duty ) 455x610 mm internal dimensions, total weight cover and frame not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg ): With common burnt clay F.P.S (non modular) brick of class designation 7.5

Providing & fixing 6 mm thick SS grating with rim of approved design including setting in floor with cement mortar to match with floor finish as per Architect requirement. (For floor trap).125 mm dia

Providing and fixing floor drain with 65mm x 50 mm GI Elbow with cement mortar compelete in all respect

Providing and fixing 100% stainless steel "cockroach" trap of approved make and quality on top of floor trap. The rate includes the cost of all ancillary works as required to complete the work.

Providing and fixing GI pipes (IS 1239) medium class complete with G.I. fittings, flanges including cutting and making good the walls, etc., complete (Internal works). 15 mm nominal bore

Providing and fixing GI pipes (IS 1239) medium class complete with G.I. fittings, flanges including cutting and making good the walls, etc., complete (Internal works). 20 mm nominal bore

Providing and fixing brass ball valves with SS 304 stem and ball, teflon seat complete. 15 mm nominal bore

Providing and fixing brass ball valves with SS 304 stem and ball, teflon seat complete. 20 mm nominal bore

SITC of VRV Variable refrigerant Volume modular type outdoor units equipped with highly efficient inverter type compressor(s) , air cooled condenser with special precoated fins type heat exchanger and direct drive low noise propeller fan system suitable for heating / Cooling. Indoor and outdoor units complete in all respect. Electrical equipment’s suitable 415V 50Hz power supply. OUTDOOR UNITS 12 HP Supply . (DAIKIN/ MITSUBISHI/ FIJITSU O GENERAL/TOSHIBA/SAMSUNG)

Installation and gas charging - first charge refrigerant (R-410A or equivalent) with lubricating oil.

Cassette type Indoor Unit with fittings equipped with pre- filter, fan section with low noise fan and multispeed motor, drain pump complete as reqd. (Including Corded Remote & Refnets) 3.0 TR Nominal Capacity. (DAIKIN/ MITSUBISHI/ FIJITSU O GENERAL/TOSHIBA/SAMSUNG)

SITC of Wireless Remotes

REFRIGERANT PIPING SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd. 28.6mm O.D (insulation -19mm thick)

REFRIGERANT PIPING SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd. 19.1mm O.D (insulation -13mm thick)

REFRIGERANT PIPING SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd. 15.9mm O.D (insulation -13mm thick)

REFRIGERANT PIPING SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd. 12.7mm O.D (insulation -13mm thick)

REFRIGERANT PIPING SITC of interconnecting following sizes of refrigerant copper pipe work refnets, Nitogen pressure testing, Vacuumising, insulated with 19/13 mm thick closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units properly fixed/support with suitable size of clamp /M.S. hanger as reqd. 9.5mm O.D (insulation -13mm thick)

SITC of Covered GSS Cable Tray of suitable size for exposed piping.

SITC of Rigid PVC Piping complete with fittings, supports as per specifications and duly insulated with 6mm thick closed cell nitrile rubber. 25 mm dia

SITC of HRV UNIT (VAM) including duct (Insulated) supply and connections complete. 250 CFM

SITC of Additional Refrigerant R 410 A to suit the extra piping lengths

SITC of COWL for Discharge of Hot AIR

Providing & fixing control cum transmission wiring in Heavy Duty PVC 20/25 mm conduit buried in wall or in suitable surface, between indoor units and outdoor units. 3 Core x 1.5 Sqmm Copper wire/Cable

Providing & fixing control cum transmission wiring in Heavy Duty PVC 20/25 mm conduit buried in wall or in suitable surface, between indoor units and outdoor units. 4 Core x 10 Sqmm Copper wire/Cable

Providing & fixing control cum transmission wiring in Heavy Duty PVC 20/25 mm conduit buried in wall or in suitable surface, between indoor units and outdoor units. Isolator with weather proof box

Drilling or core cutting in slabs, wall and beams by mechanical means of different dia meters, square or rectangular cut-outs as per services requirements including necessary support, shuttering and safety precautions UPTO 300 mm deep including sealing the core-cut with 3M™ Scotch cast™ Duct Sealing Kit 4416 or FST™ Foam Duct Sealant: 75 MM DIA

Sansun Contractors Pvt.Ltd

M/s S.K.Industries

Colliers International India Property services Pvt Ltd.