Providing Electrical Connections for Newly established Metal Quenching Lab

Amount

WIRING IN STEEL & PVC CONDUIT

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

4 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing stepped Modular socket type electronic fan regulator on the existing switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.

6 Module

8 Module

12 Module

MCCB, MCB & DB'S

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

125 A,36KA,FPMCCB

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

8 way ,door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MOB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MOB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double pole

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing FP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.

Supplying and fixing of following rating,Three/four pole,415 volts,Isolator/MCB in the existing MCB/DB complete with connections,testing and commissioning erc.as required.

Triple/Four Pole 40-63A MCB

Supplying and fixing the following ways surface/ recess mounting, vertical type, 415 volts, TPN DB-VTPN distribution board of sheet steel, dust protected, duly powder painted, inclusive of 160-250 amps tinned copper bus bar for each phase, with 2 neutral bar, 2 earth bar and cable ties for cable management, Fully insulated bus bar & Surrounded Neutral bars, din bar for mounting MCB's, with provision for DPX3 160 amps MCCB as incomer and SP/TP MCB's as outgoing, interconnection between incomer MCCB and bus bars (but without MCB's/ MCCB) as required .(Note : Vertical type MCCB TPDB is normally used where 3 phase outlets are required.) (Make: Legrand/Siemens)

8 way, 160A, door

EARTHING

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Supplying and fixing cosmos earthig electrode systems.

COSMOS ROMA 40mm DIA 2 Mtrs LENGTH WITH MOISTURE ENHANCER 25 Kg and necessary masonry works Required.

MV CABLE LAYING

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.

Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)

MV CABLE JOINTING & END TERMINATION

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

3.5 X 70 sq. mm (38mm)

4 X 25 sq. mm (28mm)

Supplying of Cables.

Supply of aluminium Armoured XLPE UG CABLE 1.1KV as per ISI Specification IS:7098/(Part-I) 1988 with latest amendments.

3.5 X 70 sq. mm (38mm)

4x25 sq mm

Supply of Light Fixtures with Lamps

LED Drive 8-10W LED driver for 2 X 2 Light fitting Uin=240-, Fin=50hz, Iin=0.23A max,Pin=52W max ,PF(λ)=0.95 Typ.,Iout=0.60A,ULED=57-67V DC,Uout=115V DC max,ta=0-50°C,tc=+70°C

22W 4 Feet LED batten BN021C LED22S

FAN AND REWINDING WORKS

Supplying and fixing of ceiling fan of following sweep, suitable for operation on 230 Volts, single phase, 50 Hz, AC Supply including 300 mm long down rod as equired.(Make: Crompton Greaves/Rivera/Equivalent)

1200mm Sweep

Udaya Technologies Private Limited (BID ID -3275077)

RRK ENTERPRISES (BID ID -3262252)