Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
Closing Date
25 Jul 2023, 6:55 pmClosed
Executive Engineer Mech. Irrig. Div. Baramulla
Mech. Irrig. Div. Baramulla
Electrical/Mechanical works at Lift irrigation scheme Sheerbugh of MISD Pattan.
2023_IFC_221564_17
eNIT 07 of 2023-24
Open Tender
Repair and Maintenance Works
Item Rate
7 days
Pattan
Please refer Tender documents.
7 documents required · 7 mandatory
₹50
Yes
Executive Engineer Mech. Irrig. Div. Baramulla
Yes
5 Aug 2023
14 Jul 2023
26 Jul 2023
14 Jul 2023
25 Jul 2023
14 Jul 2023
Amount
Fabrication of M.S trash guard by way of cutting and arc welding of mild steel angles and square bars for LI/Dewatering scheme Sheerbugh with following specification: i. Height of trash guard = 9 feet. ii. Width of trash guard = 6 feet 6 inch. iii. Frame of trash guard to be fabricated out of ISA 50×50×5. iv. Vertical meshing of the trash guard to be fabricated out of 12mm thick M.S square bars. v. Gap between two adjacent vertical square bars = 2". Total length of ISA 50×50×5 = 9.5 mtr Total weight of ISA 50×50×5 @3.8kg.mtr= 36.1 kgs
Total length of rectangular strip 65mmx5mm = 7.92 mtr Total weight M.S strip @2.78kg/mtr = 22 kg
Total length of 12mm thick M.S square bars used for mesh making = 79.57 mtr Total weight of M.S square bars @ 1.1kg/mtr = 87.5 kgs
Contingencies @ 5% of the total weight Note: The trash guard should be made as per the actual site conditions and the contractor has to take the measurements before taking up the Job
Preparing of surface of Trash guard using blue lamp and metallic sand paper and then applying of two coats of red oxide anti corrosive primer followed by two coats of enamel paint of reputed make. Shade of paint to be specified by the site engineer.
Providing and fitting of 20W Led light with IP 65 rating. The Job includes wiring of the light with 1sqmm FRLS copper wire and 6A MCB with gang box for ON and OFF operation.
Providing of LED Lantern with Twin Charging mode – Charging Cable or Solar Panel (inclusive of panel) (Syska/ Havells/ Andslite/ Philips)
Providing and fitting of trip coils for starter
Providing and fitting of analogue voltmeter ( 0 - 500V) of AE/Rishabh make
MEER ENGINEERS INDUSTRIAL ESTATE SOPORE
M/S EURO LIGHT ENTERPRISES
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .