PROVN OF SOAKAGE WELL,SEPIC TANK,TOILET FACILITY,HARD STANDING FOR MT PARKING AND B VEHS, STORAGE SHED OF 8 RR.TEMP ACCN FOR,SUPERVISORY STAFF AND SPL REP TO BLDG NO TNC-20,T-360,T-363 AT URI UNDER GE 969 EWS.

Amount

Surface dressing n.exc 15 cm deep in soft/loose soil. Complete all as specified and directed by Engineer-In-Charge.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil. Complete all as specified and directed by Engineer-In-Charge.

Rough excavation n.exc.1.5m deep and getting out soft/loose soil. Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches in soft/loose soil n.exc 1.5 mtr wide and n.exc 1.5 mtr in depth for fdn, shafts, pier hole n. exc. 10 sqm on plan and getting out soft/loose soil,Complete all as specified and directed by Engineer-In-Charge.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.50 m deep for foundation etc or for shafts wells cesspits man hole pier holes etc n.exc 10 sqm on plan area and not exc 1.5 m depth and getting out hard /dense soil. Complete all as specified and directed by Engineer-In-Charge.

Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm. Complete all as specified and directed by Engineer-In-Charge.

Removing excavated material ( soil) exc 250 m but not exc 500 m deposited where as directed. Complete all as specified and directed by Engineer-In-Charge.

M&L for earth filling under floors , including, spreading, levelling, well ramming and watering in layers n.exc 25cm. Complete all as specified and directed by Engineer-In-Charge.

Dismantling wall and ceilling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/ blankets, any thickness, cover fillets etc. Complete all as specified and directed by Engineer-In-Charge.

Dismantling of timber scantling 40 Sqcm and over in section in any position in unframed work. Complete all as specified and directed by Engineer-In-Charge.

Dismantiling of timber fillets rails, posts rafter purlins etc under 40 Sqcm in section in any position in framed work. Complete all as specified and directed by Engineer-In-Charge.

Dismantling of boarding any description fixed in any position with nails. Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats with shutters (without taking off shutters from the frame) exc 1.5 sqm but n.exc 4 sqm each. Complete all as specified and directed by Engineer-In-Charge.

Taking down chowkats with shutters (without taking off shutters from the frame) n. exc 1.5 sqm. Complete all as specified and directed by Engineer-In-Charge.

Demolition of brick or stone masonary works built cement mortar. Complete all as specified and directed by Engineer-In-Charge.

Taking down cement plaster on brick or stone walls etc incl raking out joints, hacking for key scrubbing down with water etc. Complete all as specified and directed by Engineer-In-Charge.

Taking up or down steel tubing and connections, size 15mm dia bore, including cleaning for re-fixing or removal to stores, Complete all as specified and directed by Engineer-In-Charge.

Taking up or down steel tubing and connections, size 20mm dia bore, including cleaning for re-fixing or removal to stores, Complete all as specified and directed by Engineer-In-Charge.

M&L for hard core of broken stone or boulders of gauge n.exc.63mm deposited,spread,levelled in layers n.exc.15cm thickness,watered and rammed to a true surface. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:4:8 type D2 (40mm graded stone aggregate) in floor and foundation, filling and mass concrete. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC Type C2 1:3:6 (using 40mm graded stone aggregates) in foundation, filling and mass concrete. Complete all as specified and directed by Engineer-In-Charge.

M&L for PCC 1:2:4 type B1 25mm thick (20mm graded aggregate) as in floors etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete type B-1, 1:2:4 (using 20mm graded aggregate ) as in copping, benching etc. Complete all as specified and directed by Engineer-In-Charge.

M&L for Kota stone slabs, 20mm to 25mm thick, machine cut as in flooring of size not less than 0.25 Square metre each, set and jointed in cement slurry and pointed in cement mixed with pigment to match the shade of slab laid over & including screed bed of 15 mm thick in cement mortar (1:4) including rubbing, cutting and polishing (mirror type). Complete all as specified and directed by Engineer-In-Charge.

M&L for machine cut kota stone slab 20-25 mm thick in riser of step, skirting dado, piller laid over incl 15mm thick cement screed base of CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

M&L for chequerd cement concrete tiles 20cmx20cm x22-25mm thick, set jointed and pointed in neat cement slurry with grey cement and pigments machine pressed in floors including screed bed 15mm thick in CM 1:4. Complete all as specified and directed by Engineer-In-Charge.

M&L for non-skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18sqm, in floors etc, set jointed in neat grey cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:4). Complete all as specified and directed by Engineer-In-Charge.

S & F first quality glazed designer pattern coloured ceramic tiles of size 450mmx300mmx7mm thick fixed in pattern to wall (combination of dark & light colour with border) as in skirting, dado, set and jointed in neat cement slurry, over and including 10 mm thick rendering of cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles. Complete all as specified and directed by Engineer-In-Charge.

M&L for joint free non-skid coloured ceramic tiles 7mm to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set jointed in neat grey cement slurry @ 3Kg/Sqm and pointed in white or coloured cement to match, laid over and including 15mm thick screed bed in CM (1:6). Complete all as specified and directed by Engineer-In-Charge.

M&L for 6mm thick veneered decoretive, plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on wall. Complete all as specified and directed by Engineer-In-Charge.

M&L for 6mm thick veneered decoretive, Plywood grade 1 (BWR resin) with decoretive face veneers on one faces , fixed with nails to timber frame work on ceiling. Complete all as specified and directed by Engineer-In-Charge.

M&L for second class soft wood (Kail) clean swan timber fixed in scantling. Complete all as specified and directed by Engineer-In-Charge.

All as per Ser item No 33 above but except timber. Complete all as specified and directed by Engineer-In-Charge. (Note : Serviceable timber obtained from ser item No 10 above to be used).

S&F second class hardwood plain fillets square, rectangular in section exc 13 Sqcm & not exc 25 Sqcm. Complete all as specified and directed by Engineer-In-Charge.

S&F second class hardwood plain fillets square, rectangular in section exc 6 Sqcm and not exc 13 Sqcm. Complete all as specified and directed by Engineer-In-Charge.

M&L for weather boarding of 2nd class softwood, clean sawn, plain, 20 mm thick or feather edged 15 mm to 20 mm thick and fixed with 30 mm laps. Complete all as specified and directed by Engineer-In-Charge.

All as per Ser item No 37 above but except boarding. Complete all as specified and directed by Engineer-In-Charge. (Note : Serviceable boarding obtained from ser item No 12 above to be used).

S&F facia boarding of 2nd class soft wood planed one side with but joints 20mm thick and champhered one side and the boarding is matched. Complete all as specified and directed by Engineer-In-Charge.

S&F aluminium anodized door with shutter of frame size 101.60 x 44.50 mm, shutter having vertical and top rail with section 47.50 x 44.50 mm and bottom rail of section 114 x 44.5 mm and middle rail of size 84.50 x 44.50 mm. Complete all as specified and directed by Engineer-In-Charge.

M&L for aluminium anodized window including frame size 101.60x 44.50mm made out of approved section of size:- 47.50 x 44.50mm, shutter having bottom, top and middle rail. Complete all as specified and directed by Engineer-In-Charge.

S&F 5.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane). Complete all as specified and directed by Engineer-In-Charge.

S&F 2nd class hard wood plain soild, straight chowkats and frame wrought, framed rebated on soild, rounded or chamfered, put together with pinned at joints. Complete all as specified and directed by Engineer-In-Charge.

S&F 35 mm thick, 2nd class hardwood, plain, framed, pannelled shutters (any number of pannel) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face venner; supplied and fitted to chowkats, Complete all as specified and directed by Engineer-In-Charge.

S&F 35mm thick 2nd class hardwood glazed & skeleton shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b). Complete all as specified and directed by Engineer-In-Charge.

S&F 30mm thick 2nd class hard wood glazed & skeleton window shutter open rebated and prepared to receive glass or wire mesh gauge etc (without sash bars) edges of framings plain, chamfered or rounded, fitted with cut and mitred beads for securiny glass etc size of members of shutters as spd in SSR Part-II section 8 clause 8.23(b). Complete all as specified and directed by Engineer-In-Charge.

S&F 100mm size MS butt hinges medium weight cold rolled. Complete all as specified and directed by Engineer-In-Charge.

S&F 75mm size MS butt hinges medium weight cold rolled. Complete all as specified and directed by Engineer-In-Charge.

S&F 150mm length aluminium anodised barrel tower bolts of extruded section. Complete all as specified and directed by Engineer-In-Charge.

S&F 100mm length aluminium anodised barrel tower bolts of extruded section. Complete all as specified and directed by Engineer-In-Charge.

S&F 150mm length aluminium anodised handle cast type. Complete all as specified and directed by Engineer-In-Charge.

S&F 75mm length aluminium anodised handle cast type. Complete all as specified and directed by Engineer-In-Charge.

S&F 250mm long aluminium alloy, anodised, sliding door bolts plate type stove enameled black with bright bolts not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple. Complete all as specified and directed by Engineer-In-Charge.

S&F 300mm ordinary rat tail rod pattern springs including rooler and roller plate of mild steel. Complete all as specified and directed by Engineer-In-Charge.

S&F 3.00mm thick sheet glass ordinary quality and glazing with oil putty or with wooden beads n.exc 0.5 sqm in each pane. Complete all as specified and directed by Engineer-In-Charge.

S&F 4 mm thick Figured glass,pin head type and glazing with oil putty in square n exc 0.5 sqm in each pane. Complete all as specified and directed by Engineer-In-Charge.

S&F galvanised mild steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.4mm and fixed with tinned tacks or glavanised wire staples. Complete all as specified and directed by Engineer-In-Charge.

S&F 12mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, Complete all as specified and directed by Engineer-In-Charge.

S&F framed work such as grills gratings etc with end of bars shoulderd and or riveted or forged in to spikes framed guard bars, barred iron door/windows etc and similar work concorming to Fe-290 Gde E-165. Complete all as specified and directed by Engineer-In-Charge.

M&L for brick work with sub class B bricks , staight or curved on plan to any radius built in 1:4 CM. Complete all as specified and directed by Engineer-In-Charge.

Brick work with sub-class 'B' bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15mm thick cement plaster with WPC on fair faces of brick works or concrete surfaces in CM 1:4 to be finihsed even and smooth without using extra cement. Complete all as specified and directed by Engineer-In-Charge. (Note: WPC will be measured and paid seperately.)

M&L for rendering 15mm thick cement plaster on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement. Complete all as specified and directed by Engineer-In-Charge.

Supply only water proofing compound. Complete all as specified and directed by Engineer-In-Charge.

Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below or above ground level) and removal from site. Complete all as specified and directed by Engineer-In-Charge.

Dismantling of plain/corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof covering. Complete all as specified and directed by Engineer-In-Charge.

S&F 0.63mm thick galvanised corrugated mild steel sheeting with two corrugation side lap fixed with 'L' type or `J' type or cranked hook bolts etc including bitumen washer in roofs, with 275 grams/sqm zinc coating. Complete all as specified and directed by Engineer-In-Charge.

S&F 0.80mm thick plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashing etc with grade of zinc coating 275. Complete all as specified and directed by Engineer-In-Charge.

All as per ser item No 67 above but except sheeting. (Note : Serviceable sheets obtained from ser item No 66 above to be used).

M&L for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Complete all as specified and directed by Engineer-In-Charge.

M&L for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws. Complete all as specified and directed by Engineer-In-Charge.

S&F wind ties for roof including all as necessary drilling, bolting etc conforming to Fe-290-0 or Gde E-165 including two coats of synthetic enamel paint. Complete all as specified and directed by Engineer-In-Charge.

S&F tubular curtain rails 20mm dia of aluminium anodised. Complete all as specified and directed by Engineer-In-Charge.

S&F galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 15 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions. Complete all as specified and directed by Engineer-In-Charge.

S&F galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 20 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs vitreous china white wash hand basin size (550mmx400mm), flat back, supported on and including suitable angle iron bracket including 32mm dia CP brass coupling alongwith PVC waste pipe complete including connection to pipes etc with and including 15mm dia, 450mm long PVC connection pipes with steel check nuts (excluding taps) including cutting for pinning in ends of brackets. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs vitreous china wash down water closet EWC (pedestal pattern), white (including fixing bolts, flushing cistern and flush pipe), plastic seat and cover white with mild steel chromium plated or anodised hinging devices, connected to drains outlet including chromium plated steel jet pressure unit, fixed. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs plastic water closet seat and cover black/white, closed pattern with flat bottom with mild steel chromium plated or anodised hinge devices to pedestal pan, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC polypropylene, valve less syphonic action type flushing cistern 10 litre capacity, low level, white/coloured with inlet, ball valve with float and handle, including new brackets fixed in position, PVC bend/flush pipe 32mm dia, complete including connections to water mains. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs bib taps, cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure, screwed for iron pipe or for brass ferrule 15mm dia bore, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs pillar taps, cast copper alloy, chromium plated, fancy type with capstan head, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15mm dia bore fixed in WHB and connections to iron pipe, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs angle stop valves, cast copper alloy, screwed down high pressure, fancy type with capstan head, chromium plated, screwed both ends for iron pipe or for unions, or for brass ferrule 15mm dia bore, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450mm long, suitable for 15mm dia bore pipe, Complete all as specified and directed by Engineer-In-Charge.

S& F (SWR) floor trap, 75mm diameter of outlet with grating including jointing with solvent cement. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs grating 125mm dia (Minimum weight 40 gms) with or without waste hole of PTMT fixed on floor/ nahani trap with cement mortar, Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs PTMT waste coupling & flexible pipe suitable for WHB/ Sink/ Urinal, Complete all as specified and directed by Engineer-In-Charge.

S&F stop valve 20 mm cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes. Complete all as specified and directed by Engineer-In-Charge.

S&F in repairs 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down high pressure with crutch or buttter fly handle screwed both ends for iron pipe or for unions. Complete all as specified and directed by Engineer-In-Charge.

M & L for on site LLDPE septic tank designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc,complete all specified for 20 Users and as per manufacturer instructions or directed by Engineer-In-Charge.

M & L for on site LLDPE septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc,complete all specified for 10 Users and as per manufacturer instructions or directed by Engineer-In-Charge.

Construction of soakage well,1.8 meter dia and 3 meter deep below inlet pipe level(depth from inlet pipe to ground level 45 cm) incl excavation in any type of soil,Foundation in PCC 1:3:6, wells of stone Honey combed solid masonry in CM 1:4, including intercepting chamber,screen chamber,RCC cover slab in (1:1.5:3) type A-1 with factory made manhole cover/RR masonry/Filling with brick bats, complete all as shown on drawing No CESZ/TD -01/2015 sheet 1/3 to3/3.

M&L for walling of random rubble uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6. Complete all as specified and directed by Engineer-In-Charge.

M&L for 40 mm thick damp proof course in PCC 1:2:4 type B-0 Using 12.5 mm graded stone aggregate ,to horizontal or vertical surfaces including necessary formwork. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75 mm thick cement concrete type C 2, 1:4:8 (using 40 mm graded granite stone aggregate) as in sub base of flooring. Complete all as specified and directed by Engineer-In-Charge.

M&L for 200mm thick (spread thickness) soiling (sub base) with broken stone (granite, trap or basalt) of size range 100mm to 50mm deposited spread, levelled in one layer, interstices filled surfaces formed, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, Complete all as specified and directed by Engineer-In-Charge.

M&L for 150mm thick cement concrete (1:4:8) type D-2 using 40mm graded crushed stone aggregate as in sub base of floors and pavings, Complete all as specified and directed by Engineer-In-Charge.

M&L for cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less and finishing the surface with brooming, Complete all as specified and directed by Engineer-In-Charge.

M&L for spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green. Complete all as specified and directed by Engineer-In-Charge.

M&L for forming 12mm thick expansion joints filled with pre-formed bituminous fillers and top 30mm primed and sealed with sealing compound grade `A' of 100mm thickness of slab/floor, Complete all as specified and directed by Engineer-In-Charge.

M&L for forming contraction (Dummy) joints 65mm deep x 10mm wide filled with sealing compound Grade `A' Complete all as specified and directed by Engineer-In-Charge.

M&L for red moorum filling in road side berms not exc 15cm thick, spread levelled and rammed including watering. Complete all as specified and directed by Engineer-In-Charge.

M & L for formwork to soffits of suspended slabs such as roof slab n.exc 200mm thick. Complete all as specified and directed by Engineer-In-Charge.

M & L for formwork to sides of footing, plinth band, lintel band etc. Complete all as specified and directed by Engineer-In-Charge.

M & L for formwork to sides of columns. Complete all as specified and directed by Engineer-In-Charge.

M & L for formwork to edges of concrete flats, treads, floor and roofs n.exc 20cm wide. Complete all as specified and directed by Engineer-In-Charge.

M & L for reinforcement cement concrete Type (1:1.5:3) nominal mix (20mm graded crushed aggregate) as in slabs,chajjas supported on walls, Complete all as specified and directed by Engineer-In-Charge.

M & L for reinforcement cement concrete Type (1:1.5:3) nominal mix (20mm graded crushed aggregate) as in footing, plinth band. Complete all as specified and directed by Engineer-In-Charge.

M & L for reinforcement cement concrete Type (1:1.5:3) nominal mix (20mm graded crushed aggregate) as in , columns. Complete all as specified and directed by Engineer-In-Charge.

M & L for reinforcement cement concrete Type (1:1.5:3) nominal mix (20mm graded crushed aggregate) as in , beams & lintels. Complete all as specified and directed by Engineer-In-Charge.

S&F , rolled mild steel of grade Fe -410-W(Grade E-250),quality "A" in roof trusses (framed) trussed,purlins,crane gantries,rails and fastenings and heavy bracket framing(beam,tee,angle,channel or flat sections) including distance pieces,cleats etc. Complete all as specified and directed by Engineer-In-Charge.

Extra over RR stone masonry for hammer dressing to a face stones and dressing of face beds and joints as specified of random rubble uncoursed or brought up to coarse max depression onface from straight edge held against the dressed sutface n'exc 40 mm. Complete all as specified and directed by Engineer-In-Charge.

M&L for rendering 15mm thick in CM 1:4 on stone masonry surfaces. Complete all as specified and directed by Engineer-In-Charge.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia. Complete all as specified and directed by Engineer-In-Charge.

All as per item No 114 above but 6mm to 8mm dia . Complete all as specified and directed by Engineer-In-Charge.

All as per item No 114 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders. Complete all as specified and directed by Engineer-In-Charge.

M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in man hole cover slab. Complete all as specified and directed by Engineer-In-Charge.

M&L for 150mm bore plain cement Concrete (1:4;8 ) type D2 using 40 mm graded stone aggregate bed to drain pipes including packing under, and haunching including against the side of pipes after they are laid and tested . Complete all as specified and directed by Engineer-In-Charge.

M&L for reinforced concrete pipes 150 mm bore class NP-3 laid and jointed complete with collars. Complete all as specified and directed by Engineer-In-Charge.

M&L for reinforced concrete pipes 450 mm bore class NP-2 laid and jointed complete with collars. Complete all as specified and directed by Engineer-In-Charge.

S&F towel rail 600mm long of PTMT fixed with and including choromium plated brass screw and wooden/ plastic cleats (minmum weight 190 gms). Complete all as specified and directed by Engineer-In-Charge.

S&F Vitreous china sqatting pan 'Orrisa' pattern 580x440 mm white, with integral foot rest (excluding flushing cistern and flush pipe). Complete all as specified and directed by Engineer-In-Charge.

M&L for 75 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints fixed in walls. Complete all as specified and directed by Engineer-In-Charge.

M&L for 75 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed by Engineer-In-Charge.

M&L for 110 mm dia PVC (SWR) Pipe single socketed in any length with rubber joints fixed in walls. Complete all as specified and directed by Engineer-In-Charge.

M&L for 110 mm bore pipe PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors. Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) 75mm dia vent cowl. Complete all as specified and directed by Engineer-In-Charge.

M&L for rotational moulded polyethylene water storage tanks triple layers (cylindrical vertical with closed top) hoisted and fixed in position of 1000 ltrs capacity all as specified in SSR Part I and directed by Engineer-In-Charge.

S&F ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed for 20mm bore dia of pipe. Complete all as specified and directed by Engineer-In-Charge.

Excavating in post holes (or similar holes) each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm in hard/dense soil. Complete all as specified and directed by Engineer-In-Charge.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc n.exc 10 kg each brackets, conforming to Fe 290 Gde-E-165 (Note :Brackets over 10 kg each to be measured under structural steel).

S&F 1 mm thick mild steel, plain, black sheet in wall cladding steel gates and similar work cut to size, holespunched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending ot turning up, mitred angles etc as required.

S & F swivel shower of PTMT any colour for fixing with 15mm pipe.(min wt 40gms). Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) 75 mm dia bends any radius. Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) 110 mm dia reducer. Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) 110 mm dia P trap. Complete all as specified and directed by Engineer-In-Charge.

S&F PVC (SWR) 'S' trap 110/110mm dia. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over red oxide primer, Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10cm width or girth, applying two coats of synthetic enamel paint over one coat of pink primer, Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old painted surface of steel , not otherwise described over 10 cm width or grith and applying two coats of synthetic enamel paint ,Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of old painted surfaces of any descriptoin, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint on wooden surfaces. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation newly plastered surfaces of walls and applying three coats white wash. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of surfaces, plastered or unplastered new surfaces of wall and applying two coats of cement base paint. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of surfaces, plastered or unplastered old surfaces of wall and applying two coats of cement base paint. Complete all as specified and directed by Engineer-In-Charge.

M&L for preparation of new plastered surface and applying two coats of OBD ,white or tinted ,over a coat of chalk whitening. Complete all as specified and directed by Engineer-In-Charge.

Taking down carefully any type point wiring (light, fan, socket or power) complete including conduits/casing- capping with fittings such as light fittings, sockets, switches ceiling roses, board outlets etc and removing the materials/ debris and making good the disturbed surfaces of walls, floor etc to match with the existing surface.

M&L Point wiring complete with FRLS 1100 Volts grade, 1.5 Sqmm PVC insulated and unsheathed copper conductor single core cable drawn through and including 25 mm medium grade ISI marked PVC casing caping with all accessories such as bends, elbow, reducers , junction boxes /MS boxes duly painted /PVC box factory made ractangular in shape as required with top cover 3 mm thick plastic laminated sheets of required size, fixed with screws, for housing switches, sockets, regulators etc, including 1.5 sqmm PVC insulated and unsheathed copper conductor cable as earth continuity wire connected to common earth dolly all as specified and as directed, for the following :- (a) One light/ceiling fan point controlled by one switch.

(b) Description all as item no.147 above but for One switch socket combination 5 Amps on independent board.

(c) Description all as item no.147 above but for One switch socket outlet 3 pin 5 Amps on same board with other switches.

M&L for point wiring in non-metallic PVC casing & caping including all fitting with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.

S&F Modular switch piano flush button single pole one way 5/6 Amp Complete all as specified and directed by Engr-in-Charge.

S&F Modular type socket flush type multipurpose 2 in 1 , 3/5 pin suitable for 5 amps plug top controlled by one switch. Complete all as specified and directed by Engr-in-Charge.

S&F Modular type scoket multipurpose 2 in 1, 3/5 pin 15 amps flush type Complete all as specified and directed by Engr-in-Charge.

S&F Modular switch piano flush button single pole one way 15 Amp Complete all as specified and directed by Engr-in-Charge.

S&F in repairs switch socket combination flush type multipurpose 2/3 pin suitable for 5 Amp controlled by one switch. Complete all as specified and directed by Engr-in-Charge, Make:- Legrand/ Siemens/ Schneider / L&T.

S&F in repairs ceiling rose surface bakelite surface 65x50 mm, 3 trminals fixed on wall/ceiling and including PVC block.Complete all as specified and directed by Engr-in-Charge.

S&F in repairs 1 X 18 W LUMILINE Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver. Make of Bajaj / Philips/Havells.

S&F in repairs lamp holder/angle batten, PVC/Polycarbonate type with cord grip cap suitable for pendant fittings.Complete all as specified and directed by Engr-in-Charge.

S&F in repairs LED lamp of 7/9 watts 230 volts type. Complete all as specified and directed by Engr-in-Charge. Make:Syska /GE /Philips /Crompton.

S&F in repairs MCB DB 8 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, double door when MCB to be used suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engr-in-Charge Make:ABB/Siemens/Hager.

S&F MCB single pole 6-32 Amp, Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

S&F MCB SPN 40 Amp, Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

Supply, lying and fixing in repairs service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm .Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

S & F in repair Sub main wiring using two runs of single core PVC insulated cable with copper conductor multistranded 1100 volts of sizes 6.0 Sqmm through existing/ new non metalic PVC casing capping including copper earth wire in green colour of size 6.0 Sqmm connection to DB with thimbling Complete all as specified and directed by Engr-in-Charge. (Note:- Two runs of sub main wire including earth wire and rigid non metalic PVC casing capping shall be measured as one unit per RM) Make : Havells /Polycab/Finolex.

M&L for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.5 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. (Note : The rate is inclusive of necessary earth work, RFR and removal etc )

Supply and fixing in repair House service bracket (hook type complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 90 degree bends. M.S. hook and stay or guy complete all as specified and directed by Engr-in-Charge.

M&L for point wiring complete with 1100 volts grade PVC FRLS insulated unsheathed cable of copper conductor, multi stranded of size 1.5 Sqmm, single core, drawn through & including PVC rigid concealed conduit, medium grade 20mm dia, wall thickness not less than 2.00 mm duly ISI marked with all accessories such as bends, reducers, spacers, saddles, MS terminal boxes 1.6 mm thick pre-painted, covered with 3mm thick plastic laminated sheet top cover for mounting switch/sockets, fan regulators etc complete with and including continuous earth wire of size 1.5 Sqmm, single core, PVC FRLS copper conductor, insulated, unsheathed,stranded (Green colour) connected to common earth dollyComplete all as specified and directed by Engr-in-Charge. for (a) one light/bell/fan point controlled by one single pole, one way switch 5 Amps.

(b) Description all as item no.167 above but for One switch socket outlet 3 pin 5 Amps on same board with other switches.

(c ) Description all as item no.167 above but for One switch socket outlet 3 pin 5 Amps on independent board with other switches.

( d) Description all as item no.167 above but point wiring with 2.5 Sq mm size multi stranded FRLS copper conductor cable including clamps, screws gutti /plug etc PVC unsheathed cable into and including wooden board/sheet steel box of 1.6mm thick with bakelite sheet 3mm thick and PVC insulated fire retardant cable of size 2.5 Sq mm as earth continuity conductor.

S&F MCB DB 4 way sheet metal enclosure SPN 240 volts, 50 Hz, with IP-42 protection, single door with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting Complete all as specified and directed by Engr-in-Charge Make:ABB/Siemens/Hager.

S&F MCB SPN 32 Amp, Complete all as specified and directed by Engr-in-Charge, (Make:- Havells/ Standard/Schneider)

Supply, lying and fixing service connection 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed inservice connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 4 sqmm .Complete all as specified and directed by Engr-in-Charge.Make: Polycab/Finolex/KEI /Universal .

S&F non- metalic exhaust fan 150 mm sweep 230 volts connecting up incld provision of cable from ceiling rose. Complete all as specified and directed by Engr-in-Charge. Make: Bajaj / Philips/Havells.

S&F galvanised steel water tubing, 'medium grade', with all fittings and fixed complete to wall and ceiling or laid under floor, 25 mm dia bore pipes, including cutting existing steel tubing & screwing, if required for alterations and additions. Complete all as specified and directed by Engineer-In-Charge.

S&F stop valve 25 mm cast copper alloy, screwed down with high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions for sizes. Complete all as specified and directed by Engineer-In-Charge.

M&L for cutting of existing GI pipe line of 25 mm dia and inserting new pipe line incld all fittings. Complete all as specified and directed by Engr-in-Charge.

S&F 10 W, 6000 K eco-friendly ultra modern energy saving surface mounted decorative oval bulk head edge lit LED luminaire comprising of high brightness Make:-Havells cat part No. LHEOAOP7UZ6W010 or eqvlnt in Bajaj/ Philips.

S&F ceiling fan 1200 mm Sweep with 300 mm down rods and all accessories & varnishing etc, service wire copper twisted size 23/0.0076 including regulator, BEE 5 star rating. complete all as specified and all as directed by Engr-in-Charge.

S&F non- metalic exhaust fan 250 mm sweep 230, volts 900 rpm connecting up incld provision of cable from ceiling rose. Complete all as specified and directed by Engr-in-Charge. Make: Bajaj / Philips/Havells.

Cutting chases, pinning in making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills sunshades shelves, lintel etc. and cutting chases for concealed water tubing or wiring etc. and making good disturb surface cutting exc 10 cm but not exc 20 cm girth. Complete all as specified and directed by Engr-in-Charge.

M/S GHULAM HASSAN MALIK

Javeed And Co

M/s Mohammad Shafi Malik