Urgent works to conduct Mahasamprokshana for Sri Prasanna Venkateswara Swamy Temple at Avulapalli, Annamayya District

Supply & Fixing of brass sheet to Dwajam using 12 to 18 Gauge ICC Sheet including cost & conveyance of all materials such as Brass sheet brass nails, Polishing and all labour charges etc., complete as per approved drawing (Cost of Brass sheet).

Labour charges for Brass sheet covering to Dwajasthambham as per approved drawing.

Supply of Brass polishing cakes of approved quality and make including cost and conveyance of all incidental charges etc,. complete as directed during execution.

Supplying and fixing in position M.S Ornamental grills for windows and ventilators or for veranda openings using M.S. Flats, square rods, angles sheets etc., of approved design including necessary cuttings, bending fabrication, welding, grinding and finishing smooth including painting the grills with Two coats with Synthetic enamel paint Gr-I over a Primary coat (Red oxide metal primer) (total three coats) of approved make and colour including cost of making the holes into RCC or masonry works and making good the same wherever necessary, including cost and conveyance of all materials, incidental charges etc., complete.

Supply and fixing of Galvalume sheet Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.47mm thickness (Total Coated Thickness-TCT), Coating: Alu-Zinc coating AZ150 GSM. Tensile strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours with minimum end lap of 15 cms etc.,complete as directed during execution (Original coil shall be of make TATA Blue scope/JSW)

Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, LFlashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters.

Supply, fabrication and erection of MS tubes and pipes of all diametres as per IS-1161 and angles, flats, chennels, 'I' sections etc., for preparation of roof trusses including Labour charges for Fabricating all heavy steel works like trusses, stanctions, Heavy Beams & Griders including cost of welding rods power charges and painting two coats with ready mixed Synthetic enamel paint grade-I in all shades over priming coat with ready mixed red oxide primer paint (Total three coats) including labour charges for fixing by using chain pulley blocks, Derek pole arrangements and cranes etc., complete in position etc., complete as directed during execution.

Supply and fixing of stainless steel SS-304 grade tubes, sections, plates , sheets and pipes of all sizes and diameters etc., including cost and conveyance of all materials and labour charges for fabrication of stainless steel railing works using SS welding rods including buffing , polishing , lacquer finishing , to present seamless finishing etc., complete as directed during execution

Supply of the following skilled/ semi-skilled/ Un-skilled workmen for the maintenance of the miscellaneous works at in and around theTemple premises as and when required etc., complete as directed during execution by the department.

Masion/ Carpenter/ Plumber /welder Stone cutter - 2nd class

Man and woman mazdoors

Silpi Mason 1st class for Stone vargam work

Hire Charges for MS pipes Scaffolding- using MS pipes of 40 mm diameter and Special Type Clams(“Nandu “ Clamps) and after completion of work/festival the Scaffolding should be removed carefully . The rate is inclusive of hire charges, conveyance charges of all materials and labour charges for fixing and removal after completion of the work/festival etc., complete . The Scaffolding measurements shall be taken as ‘Length X Average height’( One side of the Scaffolding only)

Up to 15 Meters height