Additional works at CHC Pandanad, Alappuzha

Three seater waiting area chair with divider: supplying and placing of chair with following specifications,perforated metal bench -Cross beam and Leg shall be powder coated made of cold rolled steelwith 0.2 ±0.01 cm thickness. Seat-Back shell shall be 1.2 mm thk powder- coated perforated shell made from cold rolled M.S. sheet 0.12 ± 0.013 cm thickness. The Side Bar shall be made of powder-coated solid steel with in serts. The Shell shall be assembled on the Cross Beam with help of bolts . dimensions may range between Seat width 50.0 cm- 54.5 cm per seat. Thickness of side bars/ arm rest is4.5cm and shall be provided in between as a divider. Overall Dimensions shall be Seat Height :40.6 -44.0cm, Total Height from ground :77.5cm-91.0cm, Width & Depth of Chair as measured from ground -Width:173.5cm -176.5 cm and Depth:71 cm-74cm.Dimensions tolerance / variations shall be within +/- 1 cm. contractor shall obtain prior approval on submission of mock sample from Engineer in charge. Approved featherlite. make Godrej, Wipro or equivalent

Supplying and providing Hot, Cold & Normal Water Dispenser of 20 litre capacity Normal standing design with 14 litre refrigerator at bottom.3 temperature taps – Hot, plain and cold.3 litre cooling and 5 litre heating capacity per hour.Body made of ABS plastic and tank made of Food grade stainless steel.Heating power 420W Cooling power 90WHeavy duty bottle piercer with bottle holder .Colour White & Blue .34.5W x 31D x 94H cm Brand Voltas ,Blue star or equivalent

Supplying and providing 55''(1.38m) 4K Smart TV (Resolution 3840x2160, Refresh Rate 60Hz Native) with accessories for mounting. Make shall be LG , Panasonic,SAMSUNG or equivalent

16.68 Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

17.11.2 Providing and fixing white vitreous china laboratory sink with C.I brackets, C.P. brass chain with rubber plug 40 mm C.P brass waste and 40 mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required:Size 600x450x200 mm

10.16.3 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes

10.29.2 Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides

50.10.1 Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete