Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.9 LAccepted-AOC | L1 | Accepted-AOC M/s Ramniwas Bishnoi is the Lowest Bidder, hence accepted | |
| 2 | L2₹41.8 L+₹5.9 L (16.5%)Rejected-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | L2 | Rejected-Finance Not Lowest Bidder, Hence Rejected | |
| 3 | L3₹47.8 L+₹11.9 L (33.3%)Rejected-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L3 | Rejected-Finance Not Lowest Bidder, Hence Rejected |
Tender Value
₹33.5 L
EMD Value
₹67,000
Closing Date
29 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PHALODI
GE (AF) Phalodi
PROVN OF CERTAIN MINOR WORKS AND LBW UNDER AGE B/R-I AND AGE B/R-II AT AF STN PHALODI
2023_MES_575347_3
8470/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) PHALODI
Class E category a(i)
7 documents required · 7 mandatory
₹500
Yes
GE (AF) PHALODI
₹67,000
Yes
15 Apr 2023
15 Mar 2023
31 Mar 2023
15 Mar 2023
29 Mar 2023
17 Mar 2023
Amount
Demolition of Precast concrete articles and Precast concrete block walling built in cement mortar complete all as specified and directed.
Demolition of reinforced cement concrete of any discription and in any position not otherwise specifically provided for complete all as specified and directed.
Excavating in post holes (or similar hole) in soft/loose soil each n exc 0.5 Cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25cm watering, and removing of surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
Surface dressing n.exc 15 cm deep and getting out in hard/ dense soil complete all as specified and directed.
Excavating in trenches, n.exc 1.5m wide and n exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc 10sq m on plan and n.exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard /dense soil complete all as specified and directed.
M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and directed.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5m above the starting point complete all as specified and directed.
Earthwork in excavation by mechanical means (Hydrolic excavator) in all kind of soil over areas (Exceeding 30cm in depth, 1.5m in width as well as 10Sqm on plan) including getting out soil and disposal of surplus excavated earth lead up to 50m and upto 1.5m, as directed by Engr-in-Charge.
Ditto all as above item No 10, but lift exc 1.5m and not exc 3.00 m
Ditto all as above item No 10, but lift exc 3.00m and not exc 4.50 m.
Ditto all as above item No 10, but lift exc 4.50m and n. exc 6.00 m.
Ditto all as above item No 10, but lift exc 6.00m and n. exc 7.50m.
Removal of excavated surplus soil to a distance exc 250m and n.exc 500mtr depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.
Removing excavated surplus soil exc 50m and n.exc 250m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.
M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregates in foundations filling and mass concrete complete all as specified and directed.
M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundation filling and mass concrete complete all as specified and directed.
M & L for pre-cast PCC solid block (1:3:6) type C-1 using 20mm graded stone aggregate exc 10 cm in width and setting in CM (1:4), complete all as directed by Engineer-in-Charge.
M&L Pre-cast cement concrete type C1 (1:3:6) 20 mm graded stone aggregate. block masonry with solid blocks, exc . 10 cm in width and setting in CM 1:6 complete all as specified and directed.
M & L for providing precast cement concrete solid building blocks or slabs (1:3:6) type C-1 using 20mm graded stone aggregate with solid block 10cm thick (with plain or interlocking joints as directed) setting in mortar (1:4), complete, in walls complete all as specified and directed.
M & L for broken stone or boulders Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and rolled to a true surface complete all as specified and directed.
M & L for hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M & L for 75 mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as sub base complete all as specified and directed.
M & L for 75 mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection, finished even and fair without using extra cement complete all as specified and directed.
M&L for reinforced cement concrete M-20 (Design mix) using 20mm graded stone aggregate in foundations including rafts, footings, foundation beams, plinth beams, bases for columns etc. ; basement slabs, under reamed piles and mass concrete complete all as specified and directed.
M&L for reinforced cement concrete M-20 (Design Mix) using 20 mm stone aggregates in walls, retaining walls, basement walls, ballast walls and like, any thickness above top of footing, including attached pilaster sand buttresses complete all as specified and directed.
M&L for Reinforced cement concrete M-30 ( (20 mm graded stone aggregate) (design mix) in:- Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.
M&Lfor Reinforced cement concrete M-30 ( (20 mm graded stone aggregate) (design mix)in:- Walls, retaining walls, basement walls, ballast walls and the like;any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.
M&L for Reinforced cement concrete M-30 ( (20 mm graded stone aggregate) (design mix)in:- Slabs supported on walls, beams and col-umns in floors, roofs,landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.
M&L for formwork to sides of concrete foundations, footings, bases of columns, raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for formwork to face of walls, retaining walls, abutments, parapets and stair case railing and similar works including attached pillasters, buttresses etc vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
M&L for Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar workincluding attached pillasters, buttresses, etc.; and similar work; vertical or to batter fair finished the surfaces of concrete complete all as specified and directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) Rough finished flat surface of concrete complete all as specified and directed.
S & F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
Ditto as item No 35 above but 5mm dia and over upto and including 8mm dia as in stirups ,spacers and binders complete all as specified and directed.
S & F mild steel round bars as in rungs & handles including 12 mm dia and over, cut to length, bent to shape required complete all as specified and directed.
M&L providing reinforced cement concrete Type B1 1:2:4 using 20 mm graded stone aggregate as in slabs supported on walls , beams and columns complete all as specified and directed.
M&L providing reinforced cement concrete Type B1 1:2:4 using 20 mm graded stone aggregate as in beams, cantilever and , bresumers lintels over 1.50 m span complete all as specified and directed.
M&L providing reinforced cement concrete Type B1 1:2:4 using 20 mm graded stone aggregate as in chajjas complete all as specified and directed.
M&L formwork to soffits of of suspended slabs such as roof slabs , floor slabs , landings and similar works nexc 200mm thick for fair finished flat surfaces of concrete complete all as specified and directed.
M&L formwork to sides and soffits of floor or roof beams for fair finished the surfaces of concrete complete all as specified and directed.
M&L formwork to chajjas including edges for rough finished flat surfaces of concrete complete all as specified and directed.
M & L for 15 mm thick rendering in cement plaster 1:4 on fair faces of brick work or concrete surfaces rendering is to be finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick on other than fair faces of brick work or concrete surfaces (out side of manhole) in cement mortar 1:4 incl finishing the surface even & smooth (without using extra cement) complete all as specified and directed.
M&L 5mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:3 using water proofing compound as per manufacturer instructions finished even and smooth (without using extra cement) complete all as specified and directed.
M & L for rendering 10mm thick in CM (1:6) on PCC block masonry surfaces internal surfaces of walls finished even and smooth without using extra cement complete all as specified and directed.
M & L for rendering 5 mm thick in cement mortar 1:4 over 10 mm thick cement plaster in CM 1:6 thick on fair faces of brick work or concrete surfaces and surface is to be finished even and fair complete all as specified and directed.
M & L for preparing newly plastered surfaces of walls and applying two coats of cement base paint white or tinted in one or more tints and pattern as approved over priming plastered and other surfaces with alkali resistant paint complete all as specified and directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint/ terracotta of approved shade over priming plastered on walls all as specified & directed by Engineer-in-Charge
M & L for preparation of newly plastered surfaces of walls, of any description and applying three coats of white wash complete all as directed by Engineer-in-Charge.
Supply only integral water proofing compound complete all as specified and directed.
Supply only liquid water proofing compound , complete all as specified and directed
S&F Framed work as in doors or gates of angle or other section with gusset plates, rails etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging door fittings and hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete of (Fe-290 Gde E-165) complete all as specified and directed.
S&F Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-290 (Gde E165) complete all as speicfied and directed.
S&F Mild steel, plain, black sheet of thickness 1.25 mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as speicfied and directed.
S&F iron wheel with rubber moulded cover (Approx dia of wheel 150 mm) for moving fixed to steel gate with proper welding complete all as specified and directed.
S&F posts and struts in fencing incl cutting tops to shape as directed drilling holes notching for wire etc, flat iron, fillets ( for securing wiremesh etc.) incl necessary drilling holes etc and similar work conforming to Fe-290 gde E-165 complete all as specified and directed.
S&F Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt wt n.exc 4 kg/Sqm complete all as specified and directed.
S& F Framed work such as grills , gratings etc with ends of bars shouldered and/ or rivited or forged into spikes , farmed guard bars , barred iron doors , ladders ,framed balusetrs walkways and railing framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
S & F steel purlins, wind ties as in roof truss (beams tee, angle, channel or flat sections ) including distance pieces, cleats etc) of section as approved confirming to Fe 410W (Gde E-250 ) quality A complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts including securing or tying at crossings with and provn of galvanised mild steel wire, staple or steel pincomplete all as specified and directed.
M & L erecting of 610 mm dia punched tape concertina coil fencing, stretches along with two lines for RBT (supporting wire of the same material as concertina coil) having stranded specifications, average weight not less than 1.06 Kg/RM including coating of px2 compound (Anti Rust) and fixed in angle iron brackets on compound wall with and including using necessary scaffolding along the length of wall complete all as specified and directed.
S & F Cast Iron work grade FG 150 unmachined, in brackets, gully traps, gratings railing, frames, manholes covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc. 5 kg each complete all as specified and directed.
S&F Galvanised steel corrugated sheet(grade of coating 450) 1.25 mm thick in hearths; covering to door shutters covering to door chowkets ( frames ) ;chullah hood , water tanks ,water troughs ducts urinal troughs and funnels etc cut to sizes edges beaded if directed , holes punched ; including roundheaded screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ rivetedseams including bending turning up,mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.
S & F pre-painted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
M&L for preparation of newly steel surfaces of any description over 10cm in width or girth and applying two coat of synthetic enamal paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
M & L for preparation of new steel surfaces of any description, not exc 10 cm in width or girth and applying two coats of black bituminous paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 100 mm thickness, M-50 Grade,with grey cement and no pigment over 25mm to 30mm sand thickness complete all as specified and directed.
M&L for using precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in window or door cills, lintels bressumers, steps, quoin blocks (for use with masonary), string courses, copings, kneelers, apex stones, Kerbs stone, pier caps, columns, posts, boundary pillars, anchorage blocks, bonders (for stone walling) with plain fair faces, including chamfers, weatherings, throatings etc and set in cement mortar 1:4 complete with joints to match complete all as specified and directed.
M&L water bar installion along the joints PVC seal suitable for all construction joints subjected to hydroststatic on one or both sides all as specified and directed at SSR Part I Clause 4.25.3.2
M & L for Squared rubble walling, Jodhpur type brought upto courses, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and directed.
Extra over item no 72 for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling, Jodhpur type, brought upto courses complete all as specified and directed.
External angles (for quoins and jambs) in facings for walling of squared rubble uncoursed or brought upto courses complete all as specified and directed.
M & L for Plain cement concrete (1:2:4) type BO using 12.50 mm graded aggreagtes as in copings, and fiiling in chowkats complete all as specified & directed.
M&L for providing precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone agg) in precast cover slabs (for manholes etc) incl all use of forms, moulds or machine moulds and setting the blocks, slabs etc in cement mortar 1:6 complete all as specified & directed. Note : Reinforcement shall be measured and paid seperatly.
M&L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) in surface channels and drains complete all as specified & as directed.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mitered/stopped ends, etc. complete all as specified and directed. Note : Inner girth only measured.
Add or deduct for each 25mm girth or part thereof over or under 30cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends, etc complete all as specified and directed.
S&F 75mm bore sand cast iron soil, waste and vent pipe in any length with or without ears laid in trenches or in floors with cement joints and provision of required number flat iron clamps of required sizecomplete all as specified and directed.
S&F 75mm bore sand cast iron soil, waste and vent pipe in any length with or without ears fixed on walls with cement joints and provision of required number flat iron clamps of required sizecomplete all as specified and directed.
M&L for cast iron cowl 75 mm dia complete all as specified and directed.
Broken stone/brick bats
M&L for 150mm bore reinforced cement concrete pipe, class NP2, laid & jointed complete with collars in CM (1:1) with spun yarn & tested complete all as specified & directed by Engr-in-charge.
M&L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone agg) as in bed of 150mm bore drain pipes including packing under & hunching against the sides of pipes after they are laid, jointed & tested complete all as specified and directed Note : RCC pipes shall be measured and paid for separately under respective items of this schedule.
Ditto all as per item No.85 above but completely surrounding pipe with concrete.
M & L for 15 mm thick screed bed or bedding layer of cement mortar (1:6) for laying floor finishes complete all as specified and directed.
M & L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
M& L chequred cement concrete tiles 20cm x 20 cm x 25mm thick with grey cement and pigment and set jointed and pointed with neet cemnt slurry in floors complete all as specified and directed.
M & L for glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc. half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
S & F steel ventilators fixed type with glazing bars complete all as specified and directed.
S & F 3.00 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 sq m in each pane complete all as specified and directed.
S & F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
S&F Pressed steel frames 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., ccomplete all as specified and directed.
S&F Factory made 2 nd class hard wood 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S & F 200 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
S & F 150 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S & F 100 mm long butt hinges, heavy weight, cold rolled mild steel complete all as specified and directed.
S & F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
S & F 10 liters capacity of Low level PVC flushing cistern including of 32mm dia PVC flush pipe to connect from flushing cistern to water closet (any pattern) and making good all the Joints complete all as specified and directed.
S & F PVC connections pipe 15 mm size with PTMT nuts of length 750mm long complete all as specified and directed,
S & F vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts, flushing cistern, flush pipe) complete all as directed by Engr-in-charge.
S&F Viterous China squatting pan Orrisa pattern size 580 x440mm white with intergral foot rests(exculding flushing cistern and flush pipe complete all as specified and directed.
S& Fix vitreous china urinal bowl flat back size of 465x355x265mm white(excluding flushing cistern and flush pipe etc) complete all as specified and directed.
S & F plastic water closet seat,white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.
S & F vitreous china wash basin white ,flat back size 550 x 400 mm excluding taps,waste pipe,chain and plug and procelain stopper but including brackets complete all as specified and directed.
S & F 40 mm dia of waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed.
S & F PVC flexible waste pipe, 32 mm dia, suitable for WHBs/sinks, including threaded PVC socket suitable for shank of waste coupling complete all as specified and directed.
S & F grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed.
S & F bib taps, brass chromium plated, fancy type, screwed down, screwed suitable for 15 mm iron pipe or for brass ferrule complete all as specified and directed.
S & F 15 mm pillar taps,cast copper alloy fancy type with chromium plated screwed down,screwed for iron pipe complete all as specified and directed.
S & F 15 mm dia stop valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as directed by Engineer-in-Charge.
S & F towel rail of PTMT 450mm long fixed with and including chromium plated / brass screws and wooden / plastic cleats screws (minimum weight 170 gms) complete all as specified and directed.
S & F 300 x 300 mm shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed.
S & F 15 mm bore galvanised iron water tubing "Medium Grade", including all fittings, such as tees, bends, elbows, reducers, unions, clamps etc. complete fixed to wall or laid in trenches/ floors, complete all as directed by Engineer-in-Charge.
S & F 20 mm bore galvanised iron water tubing "Medium Grade", including all fittings, such as tees, bends, elbows, reducers, unions, clamps etc. complete fixed to wall or laid in trenches/ floors, complete all as directed by Engineer-in-Charge.
S & F 25 mm bore galvanised iron water tubing "Medium Grade", including all fittings, such as tees, bends, elbows, reducers, unions, clamps etc. complete fixed to wall or laid in trenches/ floors, complete all as directed by Engineer-in-Charge.
S & F stop valves suitable for 20 mm bore iron pipe, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.
S & F cast iron Nahani trap 75 mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.
S & F Cl soil pipe in any length with ears 100 mm bore (sand cast) in any length fixed to walls complete all as specified and directed complete all as specified and directed.
S & F Cl vent pipe in any length with ears 100 mm bore (sand cast) in any length with cement joints laid in trenches or in floors complete all as specified and directed.
S & F Cl bends (any radius) for soil pipes 100 mm bore diminishing pieces or tapers on walls with oval access doors complete all as specified and directed.
S & F Cl bends (any radius) for soil pipes 100 mm bore diminishing pieces or tapers on walls complete all as specified and directed.
S & F Cl bends (any radius) for waste pipes 75 mm bore diminishing pieces or tapers on walls with oval acesss door complete all as specified and directed
S & F cast iron cowls 100 mm bore pipe complete all as specified and directed.
M & L for cutting into existing manholes for connecting new drains (150 mm internal dia of pipe of pipe) and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.
S & F 150 mm internal dia salt glazed stoneware drain pipes, grade “A’ laid in trenches complete all as specified and directed.
S&F Rotational moulded polyethlene water storage tank 250 ltrs capacity (cylindercal vertical with closed top) hoisted and fixed in position all as specified in SSR Part I
M & L prepration of new surface of wood work of any description over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 7mm thick over and including 10 mm thick rendering in CM 1:3 , set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Cutting opening into cement concrete/ brick walls built in cement mortar or lime cement mortar superficial area n. exc. 1.00 sqm and making good in cement mortar 1:3 complete all as specified and directed.
Supply,installation,testing and commissioning of commercial kitchen equipment consisting of baffle hood of size 12'x3' made of SS sheet (20 gauge , SS 202) complete all as specified and directed by Engineer-in-Charge.
Supply, installation,testing and commissioning of GI sheet 24 gauge duct for commercial kitchen equipments including all fixtures complete all as specified and directed by Engineer-in-Charge.
M&L for Machine cut kota stone slab flooring 20-25 mm thick over cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar laid over 15 mm thick in cement mortar 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F Exhaust fan 24''(650 watt,900Rpm,crompton ,gc marathon complete all as specified and directed.
M & L for point wiring for one light / fan point controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated, unsheathed multi strand copper conductor cable FR-LSH in and including concealed PVC conduit 20 mm dia heavy duty ISI marked, steel terminal sunken boxes and 3 mm thick phenolic laminated sheet top cover for sunken boxes flush to surface for one light point/fan point, controlled by one switch connected to common earth dolly complete including cutting, chasing the surface and then making good the same in CM (1:3) complete all as specified and directed.
Supply anf Fixing switch piano flush type, 6 Amp 240 Volt, AC (ISI Marked) one way etc complete all as specified and directed.
Supply & fixing in LED batton fitting 1 x16 Watt, 220 V decorative box type with driver 4" complete fitting connection with 3 core flexible copper cable 23/0.00076 from ceiling rose to tube fitting connection etc complete all as specified and directed.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.
S&F ceiling rose surface bakelite 65mm x 50mm, 2 to 3 terminals with back plate etc complete all as specified and directed.
S&F LED light fitting, 1X25 watt, complete with tuff net glass protection IP:66, fixed to walls with GI bracket made out of suitable size of light grade pipe 32 mm dia tubing upto 1.2 mtr length bent to shape with 02 sets of MS clamps made out of 25x3 mm MS flat iron with suitable bolt and nuts and testing etc complete all as specified and directed by Engineer-in-charge. Make:- Cat Part No LHETAXU7PA6S025 of Havells or equivalent in Crompton/Bajaj
Supply and fixing in replacement of Single door sheet metal enclosure made out of CRCA mild steel sheet concealed surface mounting SPN, 2 way, 240 Volt, suitable for fixing MCBs, isolators etc complete all as specified and directed.
S&F in renewal MCB 6 Amp SPN capacities 'C' series 10KA rupturing capacaity complete all as specified and directed. Make:-Indoasian
M & L for earthing with galvanized steel plate electrode 600 x 600 mm x 6 mm size directly burred in ground vertically earth pit not less than 2.25 meter deep below normal ground level with top edge of the earth plate not less than 1.5 m below normal ground level surrounded with coal dust and common salt filling in alternative layers of 15 cm thick each connected to and including GI earth wire 4 mm dia by means of GI nuts, bolts, check nuts & washers etc connecting to main switch board and including 15 mm dia GI pipe light grade for protection of earth lead complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sqmm 4 core complete all as specified and directed.
Material and labour for dry tibba sand in trenches cushioning to under ground cable spreading, levelling hand punning complete all as specified and directed.Note- Punned down thickness will be measured for payment purpose complete all as specified and directed.
Supplying and laying un-reinforced precast concrete cable cover, class LV, type 2 with peak, size 300mm x 180mm x 40mm complete all as specified and directed.
Supply and laying steel water tubing medium grade 25 mm bore, galvanised with and including all tube fittings such as GI bends, tees, union etc. in trenches complete and connecting to water supply line and testing complete all as specified and directed.
Supply and fix gun metal gate Valve 25 mm bore, conforming to IS 9338 complete all as specified and directed.
KRISHNA CONSTRUCTION COMPANY
M/S HARIOM CONSTRUCTION COMPANY
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .