INSTALLING HIGHMAST NEAR NANDIGEPPA TEMPLE

INSTALLING HIGHMAST NEAR NANDIGEPPA TEMPLE

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...

Formwork For Staging : For rates upto 5 m Height, adopt Formwork percentage Addendum I Percentage Additionalities for Formwork, Centering & Scaffolding : Cement Concrete Drain Walls is 35% ( PWD SR 20...

Digging of trench of 0.6m deep x 0.50 mtr wide refilling the trench to the required ground level andconsolidating etc complete (As per Civil SR KSRB I-2, P-7) Asphalt cutting (page No. 41 Item No. 6.6...

Supply and laying Double walled corrugated (DWC) HDPE pipe including all necessary conneting sockets/couplings tees/Bends/End-caps of same materials in existing trench as per IS 14930 part-II suitable...

Supplying of 1.1 kV, XLPE or Heat resistant PVC insulated, PVC exutruted Inner Seath Armoured LTUG Cable as per IS-1554 (Part-1) or IS-7098 Part-1, Armouring strip thickness and resistivity as per IS-...

Labour Charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required 6sqnn to 16 sqmm (page No. 41 Item No. 6.5.1 as per 2019-20 (Elc) SR PWP, & I.W...

Labour Charges for laying of 1.1 KV class UG cable in existing trench GI pipe/stoneware pipe/on wall/on pole as required GI pipe 40mm (page No. 41 Item No. 6.5.1 as per 2019-20 (Elc) SR PWP, & I.W.T.D...

Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the tollowing sizes 16sqmm (page No. 43 Item No. 6.17.6 as per 2019-20 (Elc) SR PWP, & I.W.T.D Belagavi Circle Belaga...

Supplying and fixing of heavy duty cable glands suitable for UG cable of 1.1 KV class (metal only) 25mm dia (page No. 42 Item No. 6.11.2as per 2019-20 (Elc) SR PWP, & I.W.T.D Belagavi Circle Belagavi)

Fabricating supplying and mounting MS box made out SWG suitable for floor/wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equipped with ta...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade. multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and drawing Flexible multicore cable manufactured with electrolytic grade flexible copper with low conductor confirming to table 3 class 5 of IS:8130-1984 and (virgin) PVC insulation and she...

Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking ca...

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 63Amps(Page No.24 Item No 5.7.3PWD ELE Belgaum Circle SR 2019-20)

4way 30 connector (Market Rate)

Auto manual switch (Market Rate)

Supplying and fixing microprocessor Based Astronomical timer Switch with using necessary bolts nuth and washers (Page No.32 Item No 5.48 PWD ELE Belgaum Circle SR 2019-20)

Suplying And Fixing angle iron frame work fabricated Of M.S angle iron. and M.S flat.with washers etc and painted with 2 coats of red oxide and then two coats of approved paint 40X40X6mm (Page No.30 I...

Fabrication, Supplying, Erection, Testing and Commissioning of 12 Mtrs long polygon high mast with Single / Multiple telescopic sections having, (minimum overlap distance of 1.5 times of top section) ...

LED Flood Light : .Supply of LED floodlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injec...

Supplying and fixing L.T. cast lron pot heads suitable for 1.1KV class UG cable filled with necessary bitumen/insulating compound complete with terminals, clamps bolts nuts and washers etc 16sqmm (Pag...

Fixing halogen/Metal halide/SVL/IL/LED floodlight fitting over existing pole /wall ceiling including clamps, bolts nuts and wiring using suitable capacity wires (page No. 79 Item No. 14.5 as per 2019-...

Supplying fixing wiring earth electrode for grounding conduits I.C cutouts and other equipment’s on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in apit. The pit should be...

Supplying and running of GI/Copper strips for grounding connection, using necessary fixing materials as required 25X3mm GI strip (page No. 40 Item No. 6.3.1 as per 2019-20 (Elc) SR PWP, & I.W.T.D Bela...