HERITAGE WORK FOR KOTA RETAIL RO

Excavation up to 1.5 M — "Excavation for foundation upto required depth below existing ground level up to 1.5m in any type of soil except hard rock. Rate to include dressing the sides and bottom, bailing out of water if encountered, shoring, strutting, backfilling after the construction of foundation, trenches/plinth beam etccompacting by the side of the foundation and disposal of surplus excavated earth within/outside HPCL's premises to an unobjectionable place, as directed by the Engineer in Charge including spreading, watering and compaction, complete. The measurement of the excavation would be based on actual depth of excavation with applicable ratefor different depths."

PCC 1:3:6 — Providing and laying PCC 1:3:6 using 20 mm and down size graded stone aggregates including machine mixing, providing formwork if required, placing, compacting by hand ramming, curing etc complete.

BRICK MASONRY — Providing and constructing following brick masonry in CM 1:5 using first quality bricks of Class designation 35 (35 KG / SQCM minimum) and conforming to IS- 1077-1986 including providing all openings and projections , raking the joints to 1 cm deep, scaffolding, soaking of bricks in water prior to use and curing etc complete as per specifications . For Substructure below plinth level

20 MM Plaster — Providing and laying 20 mm thick smooth cement plastering in 1:4 CM in single coat to all the interior walls including providing necessary scaffolding, chicken wire mesh at all joints of brick and concrete surfaces with a minimum overlap of 150 mm in all directions and additional thickness if required to achieve perfect line and level, groove cutting without any extra cost.

ACRYLIC EMULSION PNT,EXT — "ACRYLIC EMULSION PAINT (EXTERIOR GRADE) PROVIDING AND APPLYING 3 COATS OF ACRYLIC ANTI FUNGAL CEMENT PAINT INCLUDING PRIMER OF APPROVED MAKE & SHADE TO ALL THE EXTERIOR SURFACES AS PER MANUFACTURER'S SPECIFICATIONS INCLUDING PROVIDING NECESSARY SCAFFOLDING, CURING , ETC. COMPLETE. IF ADDITIONAL COATS ARE REQUIRED TO OBTAIN UNIFORM FINISH, THE SAME SHALL BE CARRIED OUT AT NO EXTRA,COST AS DIRECTED BY ENGINEER IN CHARGE. GENERAL SPECIFICATIONS/GUIDELINES GIVEN UNDER WHITEWASHITEM ALSO TO BE FOLLOWED, AS APPLICABLE."""

PLASTIC EMULSN PAINT — "PLASTIC EMULSION PAINT: PROVIDING AND APPLYING 2 COATS ( FIRST COAT WITH BRUSH AND FINAL COAT WITH ROLLER) OF PLASTICEMULSION PAINT OF APPROVED MAKE AND SHADE ON ALL SURFACES AND HEIGHTS TO GIVE AN EVEN SHADE INCLUDING PRIMER ANDCOMPATIBLE PUTTY. APPROVED MAKE: ASIAN/NITCO / NEROLAC. GENERAL SPECIFICATIONS/GUIDELINES GIVEN UNDER WHITEWASH ITEMALSO TO BE FOLLOWED, AS APPLICABLE. """

100x100 Precast Cement Pillar — "Providing and fixing of 100x100x1200 mm Precast Cemented pillar of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire with all carved detail inculding post and base, as per approved architectural drawing/view, designed for supporting jali or any other works.The work includes hand carving of decorative patterns, dressing, shaping, edge finishing, and polishing of exposed surfaces as per design/drawing.The work further includes transportation to site, loading/unloading, lifting, hoisting, scaffolding, and fixing in position over RCC/masonry base with cement mortar (1:4) or approved adhesive/anchoring system, including proper alignment, leveling, grouting, curing, cleaning, and all complete as per drawing, specification, and direction of the Engineer-in-Charge.Measurement:Shall be measured in number (Nos.) of finished items, complete as per approved drawing/view."

S&I of Cemented Decorative — Providing and fixing precast reinforced cement concrete 75 mm wide (+-25mm) border with carving pattern of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire, including positioning, fixing in position with cement mortar 1:3 (1 cement : 3 coarse sand), finishing smooth, and curing complete minumum thickness 25mm (Design should be approved by EIC/Consultant)

S&I of Cemented 125 mm Wide — Providing and fixing precast reinforced cement concrete 125 mm wide (+-25mm) border with carving pattern of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire, including positioning, fixing in position with cement mortar 1:3 (1 cement : 3 coarse sand), finishing smooth, and curing complete minumum thickness 25mm (Design should be approved by EIC/Consultant). Rates shall include Supply, transportation, Fixing, Chemicals, Clamps, scaffolding and another required material. No extra payment will be made for any material.

S&I of Cemented 175 mm Wide — Providing and fixing precast reinforced cement concrete 175 mm wide (+-25mm) border with carving pattern of mix 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire, including positioning, fixing in position with cement mortar 1:3 (1 cement : 3 coarse sand), finishing smooth, and curing complete minumum thickness 25mm(Design should be approved by EIC/Consultant). Rates shall include Supply, transportation, Fixing, Chemicals, Clamps, scaffolding and another required material. No extra payment will be made for any material.