WELCOME MAINTENANCE AND PERIODICAL SERVICES INCLUDING MISC REPAIR WORK TO MARRIED AND OTM ACCN AT ICGS VADINAR UNDER GE (I) CG PORBANDAR

Amount

SCHEDULE 'A' B/R

Material & Labour for complete removal of existing treatment of walls by washing down and smoothing old surface of walls/ ceiling, preparation of surface by applying two coats of interior emulsion over a coat of primer over a layer of smooth Putty finish two coats as per manufacturer's instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note:- After painting, cleaning of all floors, glass & furniture by own arrangement of Contractor.

Material & Labour for old surface of walls, preparation of surface by applying one coats of interior emulsion of smooth Putty finish one coats as per manufacturer's instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note:- After painting, cleaning of all floors, glass & furniture by own arrangement of Contractor).

Material & Labour for complete removal of existing treatment by washing down and smoothing old surface of walls including scrapping and applying two coats of oil bound distemper over a coat of primer over layer of smooth Putty finish two coats as per manufacturer's instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note:- After painting, cleaning of all floors, glass & furniture by own arrangement of Contractor.

Material & Labour for preparing old plastered / decorated surface of wall including cornices etc., by brooming down and applying one coat of oil bound distemper including a wherever required of wall putty including smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note:- After painting, cleaning of all floors, glass & furniture by own arrangement of Contractor

Material & Labour for preparing old plastered / decorated surface of ceiling including cornices etc., by brooming down and applying one coat of oil bound distemper with smooth roller finish, complete all as specified and directed by Engineer-in-charge. Note:- After painting, cleaning of all floors, glass & furniture by own arrangement of Contractor

Material & Labour for preparation of old plastered surfaces of wall and applying one coat of white wash, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old plastered surfaces of ceiling and applying one coat of white wash, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old painted wood or wood based surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old painted steel based surfaces of any description exceeding 10 cm width or girth and applying one coat of synthetic enamel paint etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old painted concrete surfaces of any description over 10 cm girth or width not otherwise described and applying one coat of synthetic enamel paint, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of old decorated surfaces of walls by scrapping old paint with steel wire brush, wash the surface throughly and applying one coats of acrylic emulsion exterior grade including necessary steel scaffolding + green cloth all-round the work side for any position/height, complete all as specified and directed by Engineer-in-charge. Note :-Necessary safety precautions need to be taken before applying paint.

Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete, complete all as specified and directed by Engineer-in-charge.

Material & Labour for 15mm thick plastering in cement & sand mortar 1:4 on fair faces of stone work or brick work or concrete surfaces, finished even and smooth (w/o using extra cement), including all necessary scaffolding etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for rendering 10mm thick plastering in cement & sand mortar 1:6 on fair face of brick work or concrete surfaces of walls and finished surfaces even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Material & Labour for rendering 5mm thick cement plastering on brick or concrete surfaces on ceiling in Cement Mortar (1:3) finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of acrylic emulsion exterior grade over a coat of primer, including all necessary scaffolding etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of new plastered or un-plastered surfaces of walls including scrapping and applying two coats of oil bound distemper a coat of primer strictly as per manufacturer's instruction with smooth roller finish, complete all as specified and directed by Engineer-in-charge.

Material & Labour for preparation of new plastered or un-plastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed by Engineer-in-charge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exceeding 4.0 Sqm, complete all as specified and directed by Engineer-in-charge.

Taking down Chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed by Engineer-in-charge.

Supply and fixing 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing of 12mm thick Toughened Glass Door with patch fittings of SS-316 Grade including decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450mm suitable size, Fin Connect Patch Lock etc., in each door, including cutting holes in any size in floor and wall, complete all as specified and directed by Engineer-in-charge.

Dismantling of wall and ceiling boards (fibre pulp insulation etc) or insulation boards / slabs /blankets any thickness, including cover fillets, complete all as specified and directed by Engineer-in-charge.

Material & Labour for hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed by Engineer-in-charge.

Material & Labour for 12mm thick Gypsum Board seamless Ceiling as in curved, sunken or raised surface of any design as approved and finishing the surface fair by filling the joint with POP and two coats of OBD, including GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 Metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200mm length in roof slabs by means of ceiling cleats, complete all as specified and directed by Engineer-in-charge.

Material & Labour for 12mm thick Gypsum Board seamless Ceiling as in flat surface, finishing the surface fair by filling the joint with POP and two coats of OBD including GI frame work as flat surface approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2 Metre length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200mm length in roof slabs by means of ceiling cleats, complete all as specified and directed by Engineer-in-charge.

Providing and fixing Aluminum Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two skin of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mm x 25mm with 1mm thickness in 600mm x 600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc., complete all as per Manufacturer's instruction, complete all as specified and directed by Engineer-in-charge. All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. Note:- (i) items include cost of aluminium frame, ACP, Cramps, weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete). The manufacturer shall also give guarantee/warranty for ACP for a period of Five years. (ii) The ACP should have installed by authorized company/agent.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof coverings, complete all as specified and directed by Engineer-in-charge.

Supply and fixing pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw, complete all as specified and directed by Engineer-in-charge.

Roughening surfaces of old concrete floor by picking sweeping cleaning & washing down with water to remove dust etc., including removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 Kg/Sqm, complete all as specified and directed by Engineer-in-charge.

Material & Labour for rendering 15mm thick, cement plaster, in cement mortar (1:4) mixed with integral water proofing compound as per manufactures instruction, on roof slab surfaces finished even and smooth without using extra cement, complete all as specified and directed by Engineer-in-charge. Note:- Water proofing compound shall be measured and paid separately.

Material & Labour for providing APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.3 Kg/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely. (ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method. (iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over mineral surface.

Supply only water proofing compound (integral), complete all as specified and directed by Engineer-in-charge.

Material & Labour for PCC (1:2:4) type B-1, using 20mm graded aggregate as in floor of average 40mm thick including preparation of existing surface, complete all as specified and directed by Engineer-in-charge.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises, complete all as specified and directed by Engineer-in-charge.

Material & Labour for 18mm to 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over screed bed or bedding layer of 15mm thick cement mortar 1:6 etc., complete all as specified and directed by Engineer-in-charge.

Material & Labour for Non-skid coloured ceremic tiles 7 to 8mm thick area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick cement mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Material & Labour for coloured glazed ceremic coloured tiles of size 450x300x7 mm thick in vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat in 10mm thick cement mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Material & Labour for Vitrified light shade, ceremic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over screed bed or bedding layer of mortar 15mm thick Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Material & Labour for Vitrified light shade, ceremic tiles 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over backing coat of mortar 10mm thick Cement Mortar 1:4, complete all as specified and directed by Engineer-in-charge.

Supplying and laying of CPVC pipes of size 25mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors, Including taking down old unserviceable pipe, complete all as specified and directed by Engineer-in-charge.

Supplying and laying of CPVC pipes of size 16mm outer dia SDR-11 & Plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors, Including taking down old unserviceable pipe, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Wall Mixer 3 in 1 with provision for overhead shower and hand shower with 115mm long bend pipe on upper side, connecting legs & wall flanges, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 15mm bore Bib taps, with flange chromium plated cast copper alloy with capstan head, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 7" over head shower with 225mm with flange, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 15mm Angle Cock, fancy type, chromium plated, screwed down, high pressure, with capstan head, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Tubular towel Rail CP Brass, chromium plated D type, 600mm long between flanges, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs stainless steel toilet paper holder fixed to walls with chromium plated brass screws, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Health Faucet square with 1 mtr tube and hook, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Glass Shelf 500 x 60mm (with ABS Brackets) 450 x 125 x 6mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Vitreous china wash basin, white, flat back, size 560mm x 410mm x 180mm including waste pipe, brackets including cutting for and pinning in ends of brackets or erecting stand in repairs, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Soap Dispenser holder, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs Vitreous china urinal, full stall type, white( excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including fixing bolts and flush pipe, plastic seat cover, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair vitreous china squatting pan, Orissa pattern size 580mm x 440mm white, with integral foot rests, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs 32mm dia and 900mm long PVC waste pipe suitable for sink, WHB and urinal, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair stainless steel grating doom, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair PVC connections 15mm dia size with PTMT nuts of length 600mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC (SWR) pipes 75mm single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified and directed by Engineer-in-charge.

Supply and fixing PVC(SWR) bends any radius 75mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 75mm dia PVC (SWR) floor trap, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and directed by Engineer-in-charge.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, complete all as specified and directed by Engineer-in-charge.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail, & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 30mm thick 2nd class Hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, covered with decorative face veneer with lipping/frame on both sides, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 200mm long Aluminium, anodised, barrel tower bolt of extruded section and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 100mm long Stainless steel Butt hinges, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 150mm long Extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair aluminium alloy anodised sliding door bolt with hasp staple (bolt type) length 300mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair aluminium anodised barrel tower bolt of extruded section and fixed 200mm long, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair aluminum handles fabricated type anodised 150mm, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed in floor 150mm length, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repairs aluminium extruded section door closer hydraulically operated regulated designation No 3 universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg and fixed, complete all as specified and directed by Engineer-in-charge.

Supply and fixing Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engineer-in-charge.

Supply and fixing in repair Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 20mm dia aluminium decorative type powder coated curtain rod or similar articles, complete all as specified and directed by Engineer-in-charge.

Supply and fixing aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 4mm thick Figured glass, pin head type and glazing with oil putty / rubber neoprene in squares not exceed 0.5 Sqm in each pane, including hacking out old broken glass, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 4mm thick Ordinary sheet glass not exceed 0.5 Sqm in each pane fixed with oil putty / rubber neoprene, complete all as specified and directed by Engineer-in-charge.

Material & Labour for powder coated Aluminium frame for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc. Rubber gasketting all-round the panels/ shutters to fix glass, PVC gasketting in all channels, (minimum thickness of powder coating 50 micron), complete all as specified and directed by Engineer-in-charge.

Material & Labour for powder coated Aluminium shutter for door, sliding windows & ventilators with one or more rebates including joining cleats for fixing etc. Rubber gasketting all-round the panels/ shutters to fix glass, PVC gasketting in all channels, (minimum thickness of powder coating 50 micron, complete all as specified and directed by Engineer-in-charge.

Supply and fixing 5.5mm thick sheet glass ordinary quality ground or obscured or frosted, on one side and glazing with oil putty in square exceed 0.5 sqm in each pane, complete all as specified and directed by Engineer-in-charge.

Supply and fixing of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 500 Ltrs, including dismantling of existing tank, complete all as specified and directed by Engineer-in-charge.

Supply and fixing of rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 Ltrs, including dismantling of existing tank, complete all as specified and directed by Engineer-in-charge.

Demolition of stone /boulder masonary work built in Cement Mortar including all quoins, arches, pillars etc., & removing from site, complete all as specified and directed by Engineer-in-charge.

Material & Labour Porbandar stone masonry, well bonded, bedded and solidly hearted built in Cement Mortar 1:6, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair of 15mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair of 20mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair 15mm dia (min weight 142 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, complete all as specified and directed by Engineer-in-charge.

Supply & Fixing aluminium powder coated (required colour to match window colour) grill of 5mm dia squares rectangular triangular circular shape aperture not exceeding 7.00cm in length or width fixed with H or F channel, complete all as specified and directed by Engineer-in-charge.

Cleaning of water tank of capacity exceeding 500 ltrs but not exceeding 1000 Ltr removing all scale and dirt etc. by brushing with iron brushes, removing green algae etc. by using bleaching powder, all from tanks and from mouths of circulating pipe etc., complete all as specified and directed by Engineer-in-charge. Note : The Contractor will write date of cleaning on tank as directed by Engineer-in-Charge.

Material & Labour cleaning sides and base of existing water storage semi under-ground reservoir of capacity 1-2 lakh litters, circular or rectangular at RCC including brooming down with steel wire brushing, scaping down mud, moulds, mass or any other foreign material and cleaning the surface with water etc., removing the rubish to a distance not exceeding 50 Metre and including two coat of white wash inner side of sump, complete all as specified and directed by Engineer-in-charge.

V D JADEJA (BID ID -3211357)

roxy enterprise (BID ID -3211500)

Nitesh Enterprise (BID ID -3211250)

KRISHNA ENGINEERING (BID ID -3212115)

shree chamunda enterprise (BID ID -3211799)

RAJESH ENTERPRISE (BID ID -3211401)