Athirattukunnu Lift irrigation scheme under Asspirational District Project Wayanad district.

Amount

Construction of Pumphouse and store room

2.8.1 : Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.3 : Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 15⁰ landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.3 : Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.5 : Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

5.9.6 : Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.7 : Centering and shuttering including strutting, etc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)

5.9.16.1 : Centering and shuttering including strutting, etc. and removal of form for:Edges of slabs and breaks in floors and wallsUnder 20 cm wide

50.6.1.5 : Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete

10.5.2 : Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using flats 30x6 mm for diagonal braces and central cross piece

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.6.1 : Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood / jack wood 30 mm thick shutters

50.9.15.5 : Providing and fixing iron hooks and eyes: 100 mm

9.63.3 : Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete:150x10 mm

9.66.2 : Providing and fixing ISI marked oxidised M.S. handles conforming to IS : 4992 with necessary screws etc. complete:100 mm

od4682/2021_2022 : Locking Arrangements - Supplying and Fixing lock and locking arrangements with MS/Steel Aldrop,and padlock of 65mm size.

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

13.43.1 : Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1 : Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

8.2.2.2 : Providing and fixing 18 mm thick gang saw cut, mirror, polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm

16.21 : Engraving letters in hard stone

13.71 : Lettering with black Japan pint of approved brand and manufacture

Supply of Submersible Pumpset and support frame

od4787/2021_2022 : Supply, Installation, Erection, Testing, Commissioning and fitting charges for all accessories of submerged Centrifugal Non clog pump set of Compact Unitary Mono-block submerged Single/multi stage,Volute type casing with suitable radial type impellers on common shaft for pump and motor ,Anti friction bearing with life time greasing, protection features with sensors to monitor temperature,Mechanical seal leakage ,etc.(The pump should be confirming to HIS/IS standards).The MOC of pump,casing-cast iron,impeller -SS CF8M,Shaft-SS-316,Suction Strainer -SS and other as per manufactures standard.The motor should be suitable for 3 Phase,415V /-10%,50Hz /-5%,AC supply submersible motor having Class'F'/H insulation, Air filled and IP-68protection confirming to IS 325 or latest standards .The pump discharge capacity of nearly 75 cubic metre /hour against head of 75 mtrs, Approx 40HP , the lowest head of delivery in the field is 25m, Speed 2250 RPM(N) or nearer ,with 10meters of copper power cable and control cable, railing arrangement. The pump should be painted with three coats of suitable anti corrosive paint over priming coat.

od4788/2021_2022 : Supply and erection of 40HP Auto Transformer starter (ATS) with suitable incommer and contactors including 12.5 KVA Capacitor with required indications ,metering and protections for single phasing ,over load, pump monitoring unit to protect from ingress, high temperature level etc

od4840/2021_2022 : Supply and laying termination cable of 1.1Kv 3.5 core 70sqmm aluminium conductor XLPE insulated<br>steel armoured UG cable as per relevant IS 1554

od4660/2021_2022 : Providing earthing as per the ISI specification with earth electrode of 2.10m class be GIpipe of dia not less than 40mm with necessary funneling arrangement with necessary masonry work and 38mm RCCcover slab for brick masonry

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

od4662/2021_2022 : Providing and fixing CI Non-return Valve complete . (the tail pieces, bolts, nuts, rubber insertion if required will be paid separately): 150 mm diameterClass I

od4663/2021_2022 : MS Flanges for 150mm pipe - Manufacturing supplying and fitting 150mm dia MS Flange having shell thickness 10mm depth 75mm with suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

od4664/2021_2022 : MS Pipes 150mm - Manufacturing supplying and fitting 150mm dia MS pipe of various length with shell thickness 6mm including painting with 2 coats of red oxide primer, laying the same to line and level as directed by departmental officers at site.

18.31.3.2 : Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertion etc. (the tail pieces if required will be paid separately):150 mm diameterClass II

od4667/2021_2022 : Supplying and fixing Pressure Gauge 0-16 kg/cm2 with psi 160mm Dia, Bottom Mounting, 1/2"BSP, Case: SS with Case vent, Window: Safety Glass, Dial: White Aluminium, Pointer: Black Aluminiun, Dry Case, Acurracy: 1 % of FS.Units/Pkg: 1 to the delivery line of Pumpset

od4670/2021_2022 : Providing and fixing Cast Iron bolts including nuts and washers complete.

od4672/2021_2022 : Supplying 2 Ton Chain pully unit for lifting submersible motor pumpset

od4673/2021_2022 : Supplying 20mm steel rope for lifting pumpset

13.65.1 : Painting with black anti- corrosive bitumastic paint of approved brand and manufacture to give an even shade:Two or more coats on new work

Supply and fittings of Irrigation Line

od4776/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 75mm dia, conforming to IS 4984/2016

od4777/2021_2022 : Supplying HDPE Pipe, PE100, PN8, 75mm dia, conforming to IS 4984/2016

od4780/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 90mm dia, conforming to IS 4984/2016

od4781/2021_2022 : Supplying HDPE Pipe, PE100, PN8, 90mm dia, conforming to IS 4984/2016

od4782/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 110mm dia, conforming to IS 4984/2016

od4783/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 125mm dia, conforming to IS 4984/2016

od4784/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 160mm dia, conforming to IS 4984/2016

od5048/2021_2022 : Supplying HDPE Pipe, PE100, PN6, 200mm dia, conforming to IS 4984/2016

od5049/2021_2022 : Supplying HDPE Pipe, PE100, PN8, 200mm dia, conforming to IS 4984/2016

od5050/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. (KWA 100.10.7) 200 mm OD HDPE pipe

od4675/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. (KWA 100.10.5) 160mm HDPE Pipe

od4676/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. (KWA 100.10.3) 125 mm OD HDPE pipe

od4677/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. (KWA 100.10.2) 110 mm OD HDPE pipe

od4678/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. (KWA 100.10.1) 90 mm OD HDPE pipe

od4786/2021_2022 : Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings. 75mm OD HDPE pipe

od4679/2021_2022 : Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidatingeach deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :All kinds of soil (Ref. Item No. 2.10.1 of DSR)

od4804/2021_2022 : Supply and fixing for PE100, 75mm HDPE Bend PN6 including cost of material and labour etc complete

od4806/2021_2022 : Supply and fixing for PE100, 90mm HDPE Bend PN6 including cost of material and labour etc complete

od4808/2021_2022 : Supply and fixing for PE100, 110mm HDPE Bend PN6 including cost of material and labour etc complete

od4809/2021_2022 : Supply and fixing for PE100, 125mm HDPE Bend PN6 including cost of material and labour etc complete

od4810/2021_2022 : Supply and fixing for PE100, 160mm HDPE Bend PN6 including cost of material and labour etc complete

od5051/2021_2022 : Supply and fixing for PE100, 200mm HDPE Bend PN6 including cost of material and labour etc complete

od5052/2021_2022 : Supply and fixing for PE100, 200mm HDPE Bend PN8 including cost of material and labour etc complete

od4812/2021_2022 : Supply and fixing for PE100, 75x75x75mm HDPE Tee PN 6 including cost of material and labour etc complete

od4813/2021_2022 : Supply and fixing for PE100, 75x75x75mm HDPE Tee PN 8 including cost of material and labour etc complete

od4814/2021_2022 : Supply and fixing for PE100, 90x90x90mm HDPE Tee PN 6 including cost of material and labour etc complete

od4815/2021_2022 : Supply and fixing for PE100, 90x90x90mm HDPE Tee PN 8 including cost of material and labour etc complete

od4816/2021_2022 : Supply and fixing for PE100, 110x110x110mm HDPE Tee PN 6 including cost of material and labour etc complete

od4817/2021_2022 : Supply and fixing for PE100, 125x125x125mm HDPE Tee PN 6 including cost of material and labour etc complete

od4818/2021_2022 : Supply and fixing for PE100,160x160x160mm HDPE Tee PN 6 including cost of material and labour etc complete

od5053/2021_2022 : Supply and fixing for PE100, 200mm HDPE Tee PN6 including cost of material and labour etc complete

od5054/2021_2022 : Supply and fixing for PE100, 200mm HDPE Tee PN8 including cost of material and labour etc complete

od4824/2021_2022 : Supply and fixing for PE100, 90x75mm HDPE Reducer PN 6 including cost of material and labour etc complete

od164/2022_2023 : Supply and fixing for PE100, 90x75mm HDPE Reducer PN 8 including cost of material and labour etc complete

od4844/2021_2022 : Supply and fixing for PE100, 110x75mm HDPE Reducer PN 6 including cost of material and labour etc complete

od165/2022_2023 : Supply and fixing for PE100, 110x75mm HDPE Reducer PN 8 including cost of material and labour etc complete

od4828/2021_2022 : Supply and fixing for PE100, 110x90mm HDPE Reducer PN 6 including cost of material and labour etc complete

od5055/2021_2022 : Supply and fixing for PE100, 110x90mm HDPE Reducer PN 8 including cost of material and labour etc complete

od4830/2021_2022 : Supply and fixing for PE100, 125x110mm HDPE Reducer PN 6 including cost of material and labour etc complete

od4831/2021_2022 : Supply and fixing for PE100, 160x110mm HDPE Reducer PN 6 including cost of material and labour etc complete

od4833/2021_2022 : Supply and fixing for PE100, 160x125mm HDPE Reducer PN 6 including cost of material and labour etc complete

od5056/2021_2022 : Supply and fixing for PE100, 200x110mm HDPE Reducer PN 6 including cost of material and labour etc complete

od5057/2021_2022 : Supply and fixing for PE100, 200x110mm HDPE Reducer PN 8 including cost of material and labour etc complete

od5058/2021_2022 : Supply and fixing for PE100, 200x160mm HDPE Reducer PN 6 including cost of material and labour etc complete

od5059/2021_2022 : Supply and fixing for PE100,160mm HDPE Flange PN6 including cost of material and labour etc complete

od4834/2021_2022 : Supply and fixing for PE100,160mm HDPE Flange PN8 including cost of material and labour etc complete

od5060/2021_2022 : Supply and fixing for PE100, 110mm HDPE Flange PN 6 including cost of material and labour etc complete

od4835/2021_2022 : Supply and fixing for PE100, 90mm HDPE Flange PN 8 including cost of material and labour etc complete

od4836/2021_2022 : Supply and fixing for PE100, 75mm HDPE Flange PN 8 including cost of material and labour etc complete

od4846/2021_2022 : Supply and fixing for PE100, 75mm HDPE Flange PN 6 including cost of material and labour etc complete

od4848/2021_2022 : Supply and fixing for PE100, 63mm HDPE Flange PN 6 including cost of material and labour etc complete

od4838/2021_2022 : Supply and fixing for PE100, 75x63mm HDPE Saddle piece PN6 with steel nuts and bolts fittings and labour charges etc

od5061/2021_2022 : Supply and fixing for PE100, 110x63mm HDPE Saddle piece PN6 with steel nuts and bolts fittings and labour charges etc

od4839/2021_2022 : Supply and fixing for PE100, 160x63mm HDPE Saddle piece PN6 with steel nuts and bolts fittings and cost of labour

od4670/2021_2022 : Providing and fixing Cast Iron bolts including nuts and washers complete.

18.59.1 : Providing and fixing C.I double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( The tail pieces, tapers etc. if required will be paid separately):50 mm dia

od4720/2021_2022 : Supply of CI Double Flanged Sluice Valve Conforming to IS 14846 - 2000, Sluice Valve with Cap PN 1.6, Size 80mm. (KWA 100.98.457)

od4876/2021_2022 : Supply of Leather Gasket for flange connection<br>

18.33.1 : Constructing masonry chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement:4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 ( 1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design:With common burnt clay F.P.S (non modular) bricks of class designation 7.5

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

od166/2022_2023 : Supplying and fixing 75mm PVC Flexible hose with hose clip

od167/2022_2023 : Supplying and fixing 65mm CI Hose collar

od168/2022_2023 : Supplying and fixing 65mm GI socket

od169/2022_2023 : Providing and fixing G.I. Bend <br>65 mm dia nominal bore

od170/2022_2023 : Providing and fixing gun metal Ball valve with Handle of approved quality (screwed end) :<br>65 mm nominal bore

od171/2022_2023 : Providing and fixing G.I. pipes Barrel Nipple 60cm Long complete with G.I fittings including trenching and refilling etc. External work<br>65 mm dia nominal bore

od172/2022_2023 : MS Flanges for 65mm pipe - Manufacturing supplying and fitting 65mm dia MS Flange having shell thickness 6mm depth 60mm with suitable bolt ,holes,fixing the flange in position with required welding around the flange,pipe joint grinding for smoothing the welded portion,including painting with red oxide primer etc. complete as directed by departments officers.

od149/2022_2023 : Shutter for check dams- Supplying and providing Vengai wood shutter planks 5cm thick including cost of materials and labour charges etc complete

60.4 : Locking Arrangements - Supplying and Fixing lock and locking arrangements with suitable chain hooks,and padlock of 65mm size.

60.5 : MS Rings - 100mm dia

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

K K SAJEEVAN

Joseph R V

Bidder Name

Joseph R V

K K SAJEEVAN

M P SUNNY