Tender for Comprehensive Operation & Maintenance of Street Lighting Infrastructure and SITC of Street Light Works at Western side of Ahmedabad city for Five Years.

Total Amount of 5 Years (SECTION-A)

Amount for 1st Year ( 1 month x 12 nos )

Amount for 2nd Year ( 1.03 x Amount of 1st Year )

Amount for 3rd Year ( 1.06 x Amount of 1st Year )

Amount for 4th Year ( 1.09 x Amount of 1st Year )

Amount for 5th Year ( 1.12 x Amount of 1st Year )

Total Amount of 5 Years (SECTION-B1)

Total Amount of 5 Years (SECTION-B1)

SECTION- B2 SITC Work

Amount of 1st Year

Amount of 2nd Year ( 1.03 x Amount of 1st Year )

Amount of 3rd Year ( 1.06 x Amount of 1st Year )

Amount of 4th Year ( 1.09 x Amount of 1st Year )

Amount of 5th Year ( 1.12 x Amount of 1st Year )

Total Amount of SITC Work (SECTION-B2)

Total Amount of SITC Work (SECTION-B2)

Total Amount of O & M (SECTION B1+ SECTION B2)

Total Amount of O & M (SECTION B1+ SECTION B2)

Total of SECTION-A+ SECTION-B1+ SECTION-B2

Document : Zonewise pole qty details

Project : Street Light Work Ahmedabad

Client : Ahmedabad Municipal Corporation

Sr NOS OF STREETLIGHT

North West Zone Total

5 West Zone Paldi

West Zone Total

2 South West Maktampura

South West Zone Total

Grand Total (Package B – West Zone)

Grand Total (Package B – West Zone)

Document : SECTION-A, O & M WORK

Project : Street Light Work Ahmedabad

Client : Ahmedabad Municipal Corporation

DESCRIPTION UNIT

NO. QTY RATE TOTAL

1 Street Light pole with < = 30 w LED light fitting (With Single Arm) No 60,533.00 75.00

2 Street Light pole with < = 30 w LED light fitting (With Two Arm) No 848.00 83.00

3 Street Light pole with < = 30 w LED light fitting (With Three Arm) No 4.00 90.00

Street Light pole with LED light fitting between 31w to 70 w (With Single

5 Street Light pole with LED light fitting between 31w to 70 w (With Two Arm) No 1,297.00 98.00

Street Light pole with LED light fitting between 31w to 70 w (With Three

7 Street Light pole with LED light fitting between 31w to 70 w (With Four Arm) No 6.00 113.00

Street Light pole with LED light fitting between 71w to 135 w & Above (With

Street Light pole with LED light fitting between 71w to 135 w & Above (With

Street Light pole with LED light fitting between 71w to 135 w & Above (With

Street Light pole with LED light fitting between 71w to 135 w & Above (With

Street Light pole with SMART LED light fitting between 80w to 250 w

12 (Excluding LED Fixture, Driver, SPD, Smart Controller, Over Voltage No 1,159.00 90.00

Protection Devices). (With Single Arm)

Street Light pole with SMART LED light fitting between 80w to 250 w

13 (Excluding LED Fixture, Driver, SPD, Smart Controller, Over Voltage No 884.00 105.00

Protection Devices) (With Two Arm)

Street Light pole with SMART LED light fitting between 80w to 250 w

14 (Excluding LED Fixture, Driver, SPD, Smart Controller, Over Voltage No 8.00 120.00

Protection Devices) (With Three Arm)

Street Light pole with SMART LED light fitting between 80w to 250 w

15 (Including LED Fixture, Driver, SPD, Over Voltage Protection Devices) (With No 4.00 120.00

Single Arm) (After guarantee period over)

Street Light pole with SMART LED light fitting between 80w to 250 w

16 (Including LED Fixture, Driver, SPD, Over Voltage Protection Devices) (With No 21.00 135.00

Two Arm) (After guarantee period over)

17 Ring Pole with Four Smart fitting No 2.00 128.00

18 Ring Pole with Four fitting No 14.00 128.00

19 High Mast Pole with LED fittings (12.0 mt to 30.0 mt High) No 118.00 1,801.00

High Mast Pole with Conventional (Sodium / MH) fittings (12.0 mt to 30.0 mt

Monthly charges for the Provision of cellular / IoT data connectivity for smart

21 streetlight controllers and feeder-level equipment, enabling real-time No 4,500.00 50.00

communication with the central LMS platform.

Document : SECTION-B1, OPTIONAL WORK FOR O&M

Project : Street Light Work Ahmedabad

Client : Ahmedabad Municipal Corporation

1 Section Feeder Panels

2 Cable Trench & Pipe

3 Cable & Termination

4 Street Light Pole & Bracket

Total Amount for 1 Year

Total Amount for 1 Year

Total Amount for 1 Month

Total Amount for 1 Month

ESTIMATE Page : 5 of

DESCRIPTION UNIT

NO. QTY RATE TOTAL

Note :It is mandatory for the successful bidder to execute this work as many times and for as much quantity as

required, based on the actual site conditions, throughout the entire contract period, as and when needed.

1 Section Feeder Pillar

Installation of Section Feeder Panel

Installation Testing and Comissioning of New / existing

section feeder pillar as said location by engineer in charge

complete in all respect as it is original with necessary cable

termination, with extra required various sizes cables & with

cable joints if needed etc. as per requirement or as per

instruction of engineer in charge.

Section Pillar Type-A, Each Door of Size Approx Height

1250mm, Length 450mm, 16 Guage

Section Pillar Type-B, Each Door of Size Approx Height

750mm, Length 375mm, 16 Guage

SITC of Section Pillar Stand of Size 40mm x 40mm x 6mm

angle, Height 950mm, Length 90mm, width 600mm.

Painting of Existing Section Feeder Panel Complete with two

coats of Aluminium Paint

1.6 Dismentalling of SFP no 225.00 1,108.00

1.7 Muffing of SFP no 225.00 4,209.00

Total of Section Feeder Pillar

2 Cable Trenches, Manholes & Pipes -

Making trench in soft soil of suitable width of 90 cms deep

from the final ground level or road level for laying cable or

locating the fault all over the run and backfilling the same &

clearing the site by removing debris & Shifting of the debris

& making site good As per the Instruction of the Engineer

Making trench in Hard murum / Tar Road of suitable width of

90 cms deep from the final ground level / road level for

laying cableor locating the fault all over the run and

backfilling the same and making the surface proper. by

removing debris & Shifting of the debris & making site good

As per the Instruction of the Engineer Incharge.

(B) If additional machinery like hammer driller or JCB use

Covering of cable with second class bricks laid cover the

cable crosswise & also on both sides with covering of 7.

Cms. layer of sand above & below cable (cable shall be laid

in 0.9mtr.deep & 0.4 Mtr.wide trench). Where there are more

than one cable in the trench on either side of the cable,

Cms. over lapping of bricks shall be provided.

Driling the road without breaking the road surface (Asphalt)

for laying of cable for feeding power supply by making

Suitable size of holes at both ends complete. (A) Up to

Driling the road without breaking the road surface (Asphalt)

for laying of cable for feeding power supply by making

2.6 Suitable size of holes at both ends complete. mt 654.00 610.00

(B) Up to 150 mm bore dia

ESTIMATE Page : 6 of

Providing & laying. Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II ) Anti Rodent type

with necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable with Excavation and backfilling

the same to make ground as per original. (A)50 mm dia

Providing & laying. Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II ) Anti Rodent type

with necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable with Excavation and backfilling

the same to make ground as per original. (C)90 mm dia

Providing & laying. Double walled corrugated pipes (DWC)

of polyethylene(conforming to IS 14930 II ) Anti Rodent type

with necessary connecting accessories of same material at

required depth for laying of cable. below ground / road

surface for enclosing cable with Excavation and backfilling

the same to make ground as per original. (D)120 mm dia.

Providing & laying approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

2.10 road crossing on or floor as directed for laying of cable. The mt 18,000.00 487.00

pipes as following size of dia & weight per 6 mtr. (E) 90 mm

Providing & laying approved make ISI marked HDPE 6Kg /

cm2 (Class-3) as per IS:4984:1995 PE-80 to be erected at

2.11 road crossing on or floor as directed for laying of cable. The mt 18,000.00 725.00

pipes as following size of dia & weight per 6 mtr. (F) 110 mm

Total of Cable Trenches, Manholes & Pipes

SITC of Flexible PVC insulated multi strand multi core 1.1 kv

grade ISI marked copper wires of following size to be

erected as directed. (f) 1.50 Sq.mm 4 core round PVC

Supply and laying of XLPE(IS:7098) (I)-88 ISI armoured

cable multistrand Aluminium conductor for 1.1 KV. to be

laid on the wall with necessary clamps or in the existing

3.2 trench/pipe of the following size of cables in the Existing Mtr 225.00 282.00

Cable Trench / Pipe

50 sq.mm x 3.5 c Al. cable

3.3 35 sq.mm x 3.5 c Al. cable Mtr 225.00 218.00

3.4 25 sq.mm x 4 c Al. cable Mtr 6,750.00 182.00

3.5 16 sq.mm x 4 c Al. cable Mtr 6,750.00 152.00

3.6 10 sq.mm x 4 c Al. cable Mtr 6,750.00 139.00

3.7 existing laid Cable recovery (Per mtr Length ), Mtr 4,727.00 14.00

Disconnecting the cable connection and Providing straight

joint with PVC mould using heat shrink /cast resin type

3.8 epoxy compound Insulating material and making the joint - - -

complete using necessary in line connectors, hardener,

earth continuity connection, spacers etc. and reconnecting

the same & ensure the joint resistance within the limits as

(A) up to 25 Sq mm Cable no. 9,054.00 1,073.00

(B) 35 to 95 Sq. mm cable. no. 1.00 1,535.00

3.9 Making of burnt Loop-IN, Loop-Out in poles no. 2,430.00 264.00

ESTIMATE Page : 7 of

4 Street Light Pole -

Installation Testing & Commissioning up to 6 Mtr Tubuler

Pole/ Swaged Pole. with All kind of Accessories MCB,

Junction Box, Pole Numbering With 2 coat of Paint, Muffing,

stud type terminal and arrangement for cable termination as

per details given by manufacturer considering site

Installation Testing & Commissioning up to 6 Mtr. Octagonal

pole/ Conical pole, any flanged mounted pole with All kind of

Accessories MCB, Junction Box, Pole Numbering With

coat of Paint, stud type terminal and arrangement for cable

termination as per details given by manufacturer considering

site requirement.

Installation Testing & Commissioning up to 7 Mtr. to 10 Mtr.

Tubuler Pole/ Swaged Pole. with All kind of Accessories

MCB, Junction Box, Pole Numbering With 2 coat of Paint,

Muffing stud type terminal and arrangement for cable

termination as per details given by manufacturer considering

site requirement.

Installation Testing & Commissioning up to 7 Mtr.to 10 Mtr

Octagonal pole/ Conical pole, any flanged mounted pole with

All kind of Accessories MCB, Junction Box, Pole Numbering

With 2 coat of Paint, stud type terminal and arrangement for

cable termination as per details given by manufacturer

considering site requirement.

Installation Testing & Commissioning up to 11 Mtr. to

Mtr.Tubuler Pole/ Swaged Pole.with All kind of Accessories

MCB, Junction Box, Pole Numbering With 2 coat of Paint,

Muffing stud type terminal and arrangement for cable

termination as per details given by manufacturer considering

site requirement.

Installation Testing & Commissioning up to 11 Mtr.to 16 Mtr

Octagonal pole/ Conical Pole, any flanged mounted pole

with All kind of Accessories MCB, Junction Box, Pole

Numbering With 2 coat of Paint, stud type terminal and

arrangement for cable termination as per details given by

manufacturer considering site requirement.

Providing cement concrete.for foundation or for concrete

filling in 1:2:4 ratio with 20 to 25 mm stone metal duly

plastered with necessary curing for pole /Panel muffing or

any other purpose.

Providing TMT Bar FE 500/500D reinforcement for RCC

4.8 work including bending, binding and placing in position Kg. 11,250.00 75.46

complete upto floor two level.

SITC of 0.1 to 2 Mtr G.I.bracket with 2 coat P.U. Paint with

primer(Any Arm Bracket as per architect design).

Note : Sample must be Approved from Client / Architect /

Consultant before supply.

Painting of street light pole with bracket complete with two

4.1 coats of Aluminium paint for following size of pole. no 29.00 213.00

(A) up to 4 mtr

Painting of street light pole with bracket complete with two

4.11 coats of Aluminium paint for following size of pole. no 2,450.00 263.00

(B) up to 6 mtr.

Painting of street light pole with bracket complete with two

coats of Aluminium paint for following size of pole.

(C) up to 9 mtr

ESTIMATE Page : 8 of

Painting of street light pole with bracket complete with two

4.13 coats of Aluminium paint for following size of pole. no 269.00 552.00

(D) up to 10 to 13 mtr / 16 mtr

4.14 PU base primer and PU Paint on pole up to 4.0 Mtr no 45.00 753.00

PU base primer and PU Paint on pole above 4.0 Mtr up to

PU base primer and PU Paint on pole above 8.0 Mtr up to

PU base primer and PU Paint on pole above 12.0 Mtr up to

SITC of Pole Numbering as per Engineer in charge, Charges

Pole dismantling, carting and to submit at AMC store. ( 4 mtr

to 10 mtr height)

Pole dismantling, carting and to submit at AMC store. (

mtr to 16 mtr height) 12 NOS OF Foundation BOLT

Supply of Foundation bolt for 12 Mtr. To 30 Mtr. High Mast

as per standard.

Any height and type pole alignment

Supply and Installation for Modification work of relocation of

Junction Box upto 1.2 Mtr. From bottom. Scope of work:-

4.23 Hole Drilling and Fixing of Junction box with loop in loop out no 446.00 941.00

cable in Existing GI / DWC Pipe with connection of Fixtures

and earthing wire

Supplying and erecting A class / B Class Galvanized iron

pipe having smooth finished bore of the pipe on both ends

erected nuts and bolts along the pole / wall shaping the pipe

as per site requirement. Pipe dia as following.

Supplying and erecting A class / B Class Galvanized iron

pipe having smooth finished bore of the pipe on both ends

4.25 erected nuts and bolts along the pole / wall shaping the pipe Mtr 1.00 323.00

as per site requirement. Pipe dia as following.

RCC/Asphalt road cutting to accommodate C-PVC 25 mm

heavy duty pipe minimum 2 x 2 inch (DXW) for cable laying

and reinstate with cementing in proper manner. (It also

include supply of C-PVC 25 mm heavy duty pipe & laying of

Note : It is mandatory in the scope of successful bidder to

execute this work as many times ( for as as many quantity)

as per actual site conditions during entire contract period as

and when required.

4.27 MS tubular sleeve 2 mtr long 219 mm dia extention piece no 56.00 6,690.00

Total of Street Light Pole

Chemical Type Earthing

Supplying & erecting in earthpit of minimum bore dia.

225mm size , approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of Copper Pipes having Outer pipe dia of 50mm

having , Inner pipe dia of 40 mm , connection terminal dia of

14 mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable

for following type of applications.

(a) For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

ESTIMATE Page : 9 of

(a) For Electrical Installation up to 440V in normal soil

5.2 Length of pipe - 2 Mtr no 110.00 5,703.00

Back filling compound - 1 Nos Bag of 25 Kg.

Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I.

pipe with necessary coupling buch buried in specially

prepared earth pit & G.I. earth wire of 8 SWG erected &

connected as directed (For panel)

Plate Type Earthing

Supplying & erecting funnel type earthing having earth plate

of following size burred in specifically prepared earth pit

mtr. below ground with 40 kg. charcoal and salt with

alternate layers of charcoal & salt, 20mm.dia. G.I. pipe with

Funnel with a wire mesh for watering & bricks masonry

block, C.I. Cover complete as per para 7.3 of IS 3043 with

necessary length of double Galvanised Iron / copper earth

wire No 6 SWG bolted with lug to the plate and covered in

12 mm dia. G.I. pipe 2.5 mtr long complete connected to the

nearest switch gear with end socket as per direction & duly

tested by earth tester confirming to IS (As per drawing) with

following specification

With 45 x 45 x 0.35 cms. G.I. earth plate

Total of Earthing

6 Miscellanious -

Replacement of lightning arrestor as per actual site condition

during entire contractor period as and when required

Replacing of Head frame for 12 mtr. To 30 mtr. High mast

Replacing of Wire rope for 12 Mtr. To 30 Mtr. High Mast

Ligting System.

Replacement of Traveling cable for 12Mt. to 30 Mt. High

Mast Lighting System.

Replacement of Double winch drum for 12 Mtr. To 30 Mtr.

High Mast Lighting System

Rewinding of electrical motor for 12 Mtr. To 30 Mtr. High

Mast Lighting System.

Replacement of electrical motor for 12 Mtr. To 30 Mtr. High

Mast Lighting System.

Dismantling of 12Mt. to 30 Mt. High Mast Lighting System &

Carting to AMC store.

Installation of 12 Mtr. To 30 Mtr. High Mast Lighting System.

With loading / Unloading

Replacement of Lent ran carriage for 12 Mtr. To 30 Mtr. High

Mast Lighting System

To carry out census of existing street light poles, Post top

pole and feeder pillar ( The same to be incorporated in CMS

App.) in entire city with help of mobile app of any king of

6.11 latest equipment (Geo-coordinate mapping) depicting lot 1.00 5,00,000.00

longitude and latitude and code of each street light poles as

per the formate indicated in the tender

(To be complete within 3 months)

Total of Miscellanious

Reinstate of paver block with back filling. Waterring,PCC and

fixing blocks in proper manner.

SITC of Cement 1:5:10 (1 Cement: 5 Coarse sand: 10 hard

broken stone aggregates 40 mm nominal size) and curing

complete excluding cost of form work in (A) Foundation and

ESTIMATE Page : 10 of

Providing and Laying of Rubber Moulded Paver Block

Grey/Coloured 60 mm thick, M-35 Grade of any size ; shape

(Usually Uni-Paver Blocks) using black trap good quality

aggragate of 20 mm nominal size for footpath, parking

areas, service lanes and other areas as mentioned in the

drawing / instruction of engineer in charge. Cost includes

formworks using rubber mould, Rate providing and laying

paver blocks as per required grading and specification. The

paver block shall be echanically

7.3 compacted. The work of paving blocks shall be executed in Sq.Mtr. 142.00 475.00

line and level by skill mason of flooring work only. It should

be laid in such a way that the no cutting of the paver block to

be necessary. if cutting of paver

block necessary then it should be cut by machine only and

carting. The finished surface of the paver block shall have

resonably good, plain finished. Paver blocks shall be

compacted and shall be relaid if necessary. Gravel or such

type of materials shall not be allowed for production. Laying

on 5 cms thick sand

Total of Civil Work

ESTIMATE Page : 11 of

ocument : SECTION-B2, SITC FOR Streetlight work

Project : Street Light Work Ahmedabad

Client : Ahmedabad Municipal Corporation

Sr. No. Description Amount

1 Section Feeder Panels

5 Cable & Termination

6 Street Light Pole & Bracket

7 Light Fixture

ESTIMATE Page : 12 of

DESCRIPTION UNIT

NO. QTY RATE TOTAL

Section Feeder Panels Type-C

"Supplying, unloading at site, shifting to site, assembling, leveling,

grouting, erecting, Testing, & Commissioning double

compartmentalized Street light control panel with IP 55 protection &

Enclosure should be powder coated fabricated from 12 Gauge M.S.

sheet & folded channel totally enclosed cubical type. with pad lock

arrangement. The successful tenderer will have to prepare general

arrangement with dimensions & get it approve through Architect/

Consultant. All civil work including RCC platform for street light panel

should be in scope of Electrical contractor complete in all respect as

per detail drawing and directed by engineer in charge. with the

mm height MS angle covered stand.

The switchboard (panel) shall have provision for future expansion &

shall be modular in construction. The bus bars shall be connected

with C type clamps without any drilling on the bus bars.

SITC of the IP 65 Smart Section feeder panel with space for Smart

Energy monitoring system and 2 number of 3 phase Energy meter of

Supply Company for the Street Lighting Consisting of following

Incoming : 100 Amp FP MCCB with the spreader link with in built

earth fault relay

R-Y-B-On-Off indicating Lamp with control fuse.

Set of 100 A. FP tinned copper busbars of EC. grade & adequate

capacity, size & insulated with colour tape & should be tined at all

Auto/Manual bypass switch with indicating lamp

Meter : VAF meter equivalent to Enercon make ELF 3259 with 100/

Outgoing : MCB's Should be of 10 KA.

Timer Equivalent to Theben make Astronomical type with the battery

back up : 2 nos.

40 amp. FP Power Contactor : 2 nos.

6 - 32 amp. DP Power Contactor : 8 nos.

40 Amp. FP MCB : 4 nos.

6 -32 Amp. FP MCB : 2 nos.

6 - 32 amp. SP MCB : 18 nos.

5 KVAR Capacitor with the 40 amp TP capacitor duty contactor with

the 10 minute time delay relay.

Panel Should Have lockable Space to incorporate the 2 nos of the

phase energy meter with its main switches with separate cable entry

with separate compartment & Separate door. Also door higes are

made from solid pin and bolted type. No welding are alloved for

Section Feeder Panels Type-D -

ESTIMATE Page : 13 of

Supplying, unloading at site, shifting to site, assembling, leveling,

grouting, erecting, Testing, & Commissioning double

compartmentalized Street light control panel with IP 55 protection &

Enclosure should be powder coated fabricated from 16 Gauge M.S.

sheet & folded channel totally enclosed cubical type. with pad lock

arrangement. The successful tenderer will have to prepare general

arrangement with dimensions & get it approve through Architect/

Consultant. All civil work including RCC platform for street light panel

should be in scope of Electrical contractor complete in all respect as

per detail drawing and directed by engineer in charge. with the

mm height MS angle covered stand.The switchboard (panel) shall

have provision for future expansion & shall be modular in

construction. The bus bars shall be connected with C type clamps

without any drilling on the bus bars.SITC of the IP 65 Smart Section

feeder panel with space for Smart Energy monitoring system and

number of 3 phase Energy meter of Supply Company for the Street

Lighting Consisting of followingIncoming : 63 Amp FP MCB with the

spreader link with in built earth fault relayR-Y-B-On-Off indicating

Lamp with control fuse.Busbar :Set of 63 A. FP tinned copper busbars

of EC. grade & adequate capacity, size & insulated with colour tape &

should be tined at all joints.Auto/Manual bypass switch with indicating

lampMeter : VAF meter equivalent to Enercon make ELF 3259 with

63/ 5 A Class 1 ct.Outgoing : MCB's Should be of 10 KA.Timer

Equivalent to Theben make Astronomical type with the battery back

up : 2 nos.40 amp. FP Power Contactor : 2 nos.6 - 32 amp. DP Power

Contactor : 8 nos.40 Amp. FP MCB : 2 nos.6 -32 Amp. FP MCB :

nos.6 - 32 amp. SP MCB : 12 nos.5 KVAR Capacitor with the 40 amp

TP capacitor duty contactor with the 10 minute time delay relay.Panel

Should Have lockable Space to incorporate the 2 nos of the 3 phase

energy meter with its main switches with separate cable entry with

separate compartment & Separate door. Also door higes are made

from solid pin and bolted type. No welding are alloved for hinges.

ESTIMATE Page : 14 of

FEEDER SECTION PILLAR TYPE-A (Regular)750 W x 600 L x

1050 H (As per drawing)Supply, installation, Testing and

commissioning of the Feeder Section Pillars as per specifications, IS

and DrawingsThe unit rate for each item shall include : Call for final

inspection prior to dispatch. Delivery of the fidder pillar / section pillar

to site. Shifting of the fidder / section piller from site to store to the

suitable location. Shifting& Fixing of Section Pillar. Assembly and

wiring of component supplied separately. Installation of sectionpiller to

including removing old section pillar. Earthing all components, frame

etc. to a common internal earth bar. M.S. parts should painted with

powder coating.Supply & fixing all accessories and supporting

3 structure. Supply & fixing of M.S. 40 x 40 x 6 channels for fixing the Set 72.00 49,161.00

panels. Connection, testing and commissioning Checking of internal

connection and wiring, operation of switches, starter, MCCB,

relays,contactors etc. Supply of necessary tools, hardware, testing

equipment etc. etc. Electrical contractor shall carry out the insulation

test at site and all the readings shall be submitted in duplicate to the

consultant or engineer-in- charge. All civil work including RCC

platform for street light panel should be in scope of Electrical

contractor complete in all respect as per detail drawing and directed

by engineer in charge with the MS angle covered stand. Approval

from State Electricity Board & Liason work. Also door higes are made

from solid pin and bolted type. No welding are alloved for hinges.

FEEDER SECTION PILLAR TYPE-B-1

SIZE :- 750 W x 600 L x 750 H (As per drawing)

Supply, installation, Testing and commissioning of the Feeder Section

Pillars as per specifications, IS and Drawings.

The unit rate for each item shall include : Call for final inspection prior

to dispatch. Delivery of the fidder pillar / section pillar to site. Shifting

of the fidder / section piller from site to store to the suitable location.

Shifting & Fixing of Section Pillar. Assembly and wiring of component

supplied separately. Installation of section piller to including old

section pillar. Earthing all components, frame etc. to a common

internal earth bar.M.S. Parts should painted with powder coating.

4 Supply & fixing all accessories and supporting structure. Supply & Set 45.00 30,602.00

fixing of M.S. 40 x 40 x 6 channels for fixing the panels. Connection,

testing and commissioning. Checking of internal connection and

wiring, operation of switches, starter, MCCB, relays, contactors

etc.Supply of neccessary tools, hardware, testing equipment etc.

Electrical contractor shall carry

out the insulation test at site and all the readings shall be submitted in

duplicate to the consultant or engineerin-

charge. All civil work including RCC platform for street light panel

should be in scope of Electrical contractor complete in all respect as

per detail drawing and directed by engineer in charge with the MS

angle covered stand. Approval from state Electricity Board & Liason

work.Also door higes are made from solid pin and bolted type. No

welding are alloved for hinges.

5 FEEDER SECTION PILLAR TYPE - B-2 Set 38.00 30,602.00

1200 W x 400 L x 900 H (As per drawing)

ESTIMATE Page : 15 of

FEEDER SECTION PILLAR TYPE - B-3Size :- 600 x 600 x

mmSupplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-Off

street lights on time scheduling basis made from 12 G CRCA

sheet duly epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable size of

Pole MCB and 4 pole contactor (cat-III)with Astronomical digital

time switch, auto manual switch of same make and suitable

6 input and output Bakelite terminals and with door earthing no 78.00 14,668.00

approved by Engineer in charge. Supply & fixing of M.S. 40 x

x 6 channelsfor fixing the panels. panel is also suitable to fit on

wall. Also door higes are made from solid pin and bolted type.

No welding are alloved for hinges. All civil work including RCC

platform for street light panel should be in scope of Electrical

contractor complete in all respect as per detail drawing and

directed by engineer in charge with the MS angle covered stand.

Removing of Section Feeder Panel

Dismantling and removing of existing section feeder pillar as said

location by engineer in charge complete in all respect as it is original

with necessary civil work foundation, cable termination, with extra

required various sizes cables & with cable joints if needed etc. as per

requirement or as per instruction of engineer in charge.

Installation of Section Feeder Panel

Installation Testing and Comissioning of New / existing section feeder

pillar as said location by engineer in charge complete in all respect as

it is original with necessary cable termination, with extra required

various sizes cables & with cable joints if needed etc. as per

requirement or as per instruction of engineer in charge.

Upgradation of Section Feeder Panel

Upgradation of existing section feeder pillar Install MCB instead of

9 Fuse as said location by engineer in charge complete in all respect as Set 4.00 3,000.00

it is original with necessary cable termination etc. as per requirement

or as per instruction of engineer in charge.

Total amount for Section Feeder Panels

Total amount for Section Feeder Panels

SITC of the MCB's ( 10 KA ) Timers , & Contactors With the Dinrail

Channel providing and erecting Miniature circuit breaker single pole

0.5A to 2A system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark

Miniature circuit breaker single pole suitable to operate on 240 V A.C.

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark

6 to 25 A SP MCB

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms

to IS : 8828 in existing box having following capacity

6 to 32 A DP MCB

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

13 quick action & tripping with all advance feature & do not incorporate no 2.00 1,950.00

any electronic component. for following Max. rating erected as

25 to 32A / 30mA/100 mA DP ELMCB

ESTIMATE Page : 16 of

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as

directed40 A / 100 mA DP ELMCB

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity

(a) 6 to 32 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive

Load (C Curve) having 10KA breaking capacity & confirms to IS :8828

in existing box having following capacity

(b) 40 Amp. Cat.III

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

(C Curve) having 10KA breaking capacity & confirms to IS :8828 in

existing box having following capacity

6 to 32A FP MCB

Supplying & erecting power contactor for time switch complete

20 erected as per direction Cat III no 2.00 1,865.00

[B] 2 pole 250V 32 Amp.

Supplying & erecting power contactor for time switch complete

21 erected as per direction Cat III no 2.00 2,755.00

[D] 4 pole 440V 40 Amp.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof thermoplastic

enclosure & transparent cover erected as required with necessary

connection erected as directed.

To Supply & Install Takti (Size 12" X 8 " in 16 gauge M.S. Plate) on

23 street light pole with painting in the prescribed matter as directed by no 44.00 424.00

the engineer in charge and take two photograph of the same takti.

Total amount for MCB

Total amount for MCB

Making trench in soft soil of suitable width of 90 cms deep from the

final ground level or road level for laying cable or locating the fault all

24 over the run and backfilling the same & clearing the site by removing mt 1,16,093.00 55.00

debris & Shifting of the debris & making site good As per the

Instruction of the Engineer Incharge.

Making trench in Hard murum / Tar Road of suitable width of 90 cms

deep from the final ground level / road level for laying cableor locating

25 the fault all over the run and backfilling the same and making the mt 29,024.00 74.00

surface proper. by removing debris & Shifting of the debris & making

site good As per the Instruction of the Engineer Incharge.

26 (B) If additional machinery like hammer driller or JCB use [Add] mt 3,207.00 354.00

ESTIMATE Page : 17 of

Covering of cable with second class bricks laid cover the cable

crosswise & also on both sides with covering of 7. 5 Cms. layer of

sand above & below cable (cable shall be laid in 0.9mtr.deep &

Mtr.wide trench). Where there are more than one cable in the trench

on either side of the cable, 5 Cms. over lapping of bricks shall be

Driling the road without breaking the road surface (Asphalt) for laying

28 of cable for feeding power supply by making Suitable size of holes at mt 4,354.00 488.00

both ends complete.(A) Up to 100 mm bore dia

Driling the road without breaking the road surface (Asphalt) for laying

of cable for feeding power supply by making Suitable size of holes at

both ends complete.

(B) Up to 150 mm bore dia

Construction of brick masonery pulling chamber 1250 mm x 1250 mm

inside clear size and depth upto 1.2 meter with 350 mm thick

masonery in cerment mortar proporation 1:5,cement finish cement

plaster in CM proportion of 15 mm thickness from inside with 150 mm

thick PCC at bottom with top slab minmum 200 mm thickness in M20

grade with reinforcement. The rate shall be inclusive of providing and

fixing frame and cover of FRC for the Heavy Duty. Rate also inclusive

of excavation and back filling & clearing the site by removing debris &

Shifting of the debris & making site good As per the Instruction of the

Engineer Incharge complete in all respect.

Total Amount for Cable Trench

Total Amount for Cable Trench

Providing & laying. Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II ) Anti Rodent type with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for enclosing

cable with Excavation and backfilling the same to make ground as per

original. The corrugated pipe shall be able to withstand compression

test at 750 N when reaching a deflection of 5 %.

Providing & laying. Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II ) Anti Rodent type with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for enclosing

cable with Excavation and backfilling the same to make ground as per

original. The corrugated pipe shall be able to withstand compression

test at 750 N when reaching a deflection of 5 %.

Providing & laying. Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II ) Anti Rodent type with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for enclosing

cable with Excavation and backfilling the same to make ground as per

original. The corrugated pipe shall be able to withstand compression

test at 750 N when reaching a deflection of 5 %.

Providing & laying. Double walled corrugated pipes (DWC) of

polyethylene(conforming to IS 14930 II ) Anti Rodent type with

necessary connecting accessories of same material at required

depth for laying of cable. below ground / road surface for enclosing

cable with Excavation and backfilling the same to make ground as per

original. The corrugated pipe shall be able to withstand compression

test at 750 N when reaching a deflection of 5 %.

ESTIMATE Page : 18 of

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing

35 on or floor as directed for laying of cable. The pipes as following size mt 5,051.00 487.00

of dia & weight per 6 mtr.

(E) 90 mm inner Dia

Providing & laying approved make ISI marked HDPE 6Kg / cm2

(Class-3) as per IS:4984:1995 PE-80 to be erected at road crossing

on or floor as directed for laying of cable. The pipes as following size

of dia & weight per 6 mtr.(F) 110 mm inner Dia.

Total Amount for pipes

Total Amount for pipes

Supply and laying of XLPE(IS:7098) )(I)-88 ISI marked armored cable

of Cu. / Aluminum conductor of 1.1 KV.grade of following sizes in

ground or in pre-laid DWC pipe / Trenches with necessary cable

identification mark to be provided at distance of 15 mt. & with 2 nos.

of 16 SWG G.I. wire continuous in length per cable.

37 50 sq.mm x 3.5 c Al. cable mt 333.00 282.00

38 35 sq.mm x 3.5 c Al. cable mt 7,216.00 218.00

39 25 sq.mm x 4 c Al. cable mt 21,648.00 189.00

40 16 sq.mm x 4 c Al. cable mt 1,21,739.00 152.00

41 10 sq.mm x 4 c Al. cable mt 84,328.00 139.00

Supplying and laying Flexible PVC insulated multistrand multicore

kv grade ISI marked copper wires of following size.

SITC of 1.00 Sq.mm 3 core round PVC sheathed

Scope also include the removal of existing wire if required

SITC of 1.50 Sq.mm 3 core round PVC sheathed

Scope also include the removal of existing wire if required

SITC of cable with 5 core x 2.5 Sq. mm EPR insulated PVC scheated

Copper Cable with required length from bottom Junction Box to top

junction box of Highmast, with needed all electrical mechanical

accessories and tools to Commission the Highmastt poles as per

tender terms, conditions & Specifications.The scope also includes the

deposition of the existing removed cables and related accessories at

the location as directed by Engineer Incharge Scope also include

the removal of existing wire if required

Cable Termination

Supplying & fixing Double Compression type Brass glands & making

joint with necessary crimping socket of long nack type connecting the

same to various equipment etc. for the following sizes:

46 50 sq.mm x 3.5 c Al. cable no 30.00 150.00

47 35 sq.mm x 3.5 c Al. cable no 1,155.00 150.00

48 25 sq.mm x 4 c Al. cable no 1,155.00 126.00

49 16 sq.mm x 4 c Al. cable no 2,310.00 107.00

50 10 sq.mm x 4 c Al. cable no 578.00 90.00

Total Amount for Cable & Termination

Total Amount for Cable & Termination

Street light Poles & High Mast

ESTIMATE Page : 19 of

SITC of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided with

FRP Anchor Base and it should be heavy duty, or MS Material duly

painted with Epoxy paint.Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

51 the paint. Minimum coating thickness shall be 80 to 100 micron. no 321.00 8,934.00

Deflection of the pole shall not exceed more than 10% of the length of

pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(1)

Suitable for base plate mounting single arm Bracket.[C] Overall length

of 3.5 Mtr. Average Thickness: 7mm.Top/ Bottom OD Dia A/F 89/135

mm ± 2mm approx. Approx. Weight of Pole 15kg. approx. (Without

Base) Anchor Base (Size 250X250 & 12mm th.)

SITC of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided with

FRP Anchor Base and it should be heavy duty, or MS Material duly

painted with Epoxy paint.

Pole should be flame retardant as per IS 6746. Resin used shall be

UV resistance and pigmented. A highly weather resistant

polyurethane coating shall be applied to the pole after applying

suitable primer system that ensures proper adhesion of the paint.

52 Minimum coating thickness shall be 80 to 100 micron. Deflection of no 161.00 9,696.00

the pole shall not exceed more than 10% of the length of pole for the

given load“ Pole should be generally made as per the dimensional

data, performance criteria and some interchangeability features of

poles as per standard ANSI C 136.20 latest version or ASTM D

4923/01 including cable termination box with necessary accessories .

The size of pole and type of installation with foundation as per

manufacturer details and site requirement are as below .

(1) Suitable for base plate mounting single arm Bracket.

[D] Overall length of 4 Mtr. Average Thickness: 7mm.

Top/ Bottom OD Dia A/F 89/145 mm ± 2mm approx. Approx. Weight

of Pole 19 kg approx. (Without Base)

Anchor Base (Size 250X250 & 12mm th.)

ESTIMATE Page : 20 of

SITC of approved make FRP Pole having following specifications:

FRP Light Pole made by CNC filament winding machine using

thermoset resin polyester/epoxy resin system) having minimum 62%

glass content. The pole should be in one piece and tapered round in

shape, having smooth finish and should be totally free from corrosion

as well as non conductive & shock proof Pole should be provided with

FRP Anchor Base and it should be heavy duty, or MS Material duly

painted with Epoxy paint.Pole should be flame retardant as per IS

6746. Resin used shall be UV resistance and pigmented. A highly

weather resistant polyurethane coating shall be applied to the pole

after applying suitable primer system that ensures proper adhesion of

53 the paint. Minimum coating thickness shall be 80 to 100 micron. no 161.00 13,920.00

Deflection of the pole shall not exceed more than 10% of the length of

pole for the given load“ Pole should be generally made as per the

dimensional data, performance criteria and some interchangeability

features of poles as per standard ANSI C 136.20 latest version or

ASTM D 4923/01 including cable termination box with necessary

accessories . The size of pole and type of installation with foundation

as per manufacturer details and site requirement are as below .(1)

Suitable for base plate mounting single arm Bracket.[H] Overall length

of 6 Mtr. Average Thickness: 7.5mmTop/ Bottom OD Dia A/F 89mm ±

2mm approx. approx. Weight of Pole 32 kg approx. (Without Base)

Anchor Base (Size 300X300 & 18mm Th.)

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 4 metre having thickness of 4.5 mm, 165 mm

outer uniform dia., with base plate of 450 x 450 x 12 mm with stiffener

plate with Seprate integral type junction box ( For Street

light ) , with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

54 with welded chain between pole and hinged door with Allen key no 321.00 13,243.00

access the integral junction box, Fabrication work complete in all

respect as per given detail with one coat of zinc oxide complete in all

respect as per Drawing. Rate shall be including two coats of PU paint

of shade as per drawing or as directed by Architect ( effective length

should be 4000mm above GF) (Sample to be approved )

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 6 metre having thickness of 4.5 mm, 165 mm

outer uniform dia., with base plate of 450 x 450 x 12 mm with stiffener

plate with Seprate integral type junction box ( For Street

light ) , with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

55 with welded chain between pole and hinged door with Allen key no 5.00 19,860.00

access the integral junction box, Fabrication work complete in all

respect as per given detail with one coat of zinc oxide complete in all

respect as per Drawing. Rate shall be including two coats of PU paint

of shade as per drawing or as directed by Architect ( effective length

should be 6000mm above GF) (Sample to be approved )

ESTIMATE Page : 21 of

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 7 metre having thickness of 4.5 mm, 165 mm

outer uniform dia., with base plate of 450 x 450 x 12 mm with stiffener

plate with Seprate integral type junction box ( For Streetlight ) , with j

bolt, necessary hardware as per detail, with necessary Reducer /

Coupler / for fixing of light fixtures & Hinged access door with welded

chain between pole and hinged door with Allen key require toaccess

the integral junction box, Fabrication work complete in all respect as

per given detail with one coat of zinc oxide complete in all respect as

per Drawing. Rate shall be including two coats of PU paint of shade

as per drawing or as directed by Architect ( effective length should be

7000mm above GF) (Sample to be approved )

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 8 metre having thickness of 4.5 mm, 165 mm

outer uniform dia., with base plate of 450 x 450 x 16 mm with stiffener

plate with Seprate integral type junction box ( For Street

light ) , with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

57 with welded chain between pole and hinged door with Allen key no 321.00 26,480.00

access the integral junction box, Fabrication work complete in all

respect as per given detail with one coat of zinc oxide complete in all

respect as per Drawing. Rate shall be including two coats of PU paint

of shade as per drawing or as directed by Architect ( effective length

should be 8000mm above GF) (Sample to be approved )

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 9 metre having thickness of 4.5 mm, 165 mm

outer uniform dia., with base plate of 450 x 450 x 16 mm with stiffener

plate with Seprate integral type junction box ( For Street

light ) , with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

58 with welded chain between pole and hinged door with Allen key no 161.00 29,790.00

access the integral junction box, Fabrication work complete in all

respect as per given detail with one coat of zinc oxide complete in all

respect as per Drawing. Rate shall be including two coats of PU paint

of shade as per drawing or as directed by Architect ( effective length

should be 9000mm above GF) (Sample to be approved )

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 10 metre having thickness of 4.5 mm,

mm outer uniform dia., with base plate of 450 x 450 x 16 mm with

stiffener plate with Seprate integral type junction box ( For Street

light ) , with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

59 with welded chain between pole and hinged door with Allen key no 161.00 33,100.00

access the integral junction box, Fabrication work complete in all

respect as per given detail with one coat of zinc oxide complete in all

respect as per Drawing. Rate shall be including two coats of PU paint

of shade as per drawing or as directed by Architect ( effective length

should be 10000mm above GF) (Sample to be approved )

ESTIMATE Page : 22 of

Supply & Installation of GI Pole made out of B CLASS ERW G.I. PIPE

for road having Height - 11 metre having thickness of 4.5 mm,

mm outer uniform dia., with base plate of 450 x 450 x 16 mm with

stiffener plate with Seprate integral type junction box ( For Streetlight )

, with j bolt, necessary hardware as per detail, with necessary

Reducer / Coupler / for fixing of light fixtures & Hinged access door

with welded chain between pole and hinged door with Allen key

require toaccess the integral junction box, Fabrication work complete

in all respect as per given detail with one coat of zinc oxide complete

in all respect as per Drawing. Rate shall be including two coats of PU

paint of shade as per drawing or as directed by Architect ( effective

length should be 11000mm above GF) (Sample to be approved )

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

61 arrangement for cable termination to be erected With Suitable no 5.00 4,196.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(A) 3 Mtr. Long 70 mm Top X 130 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%) .3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

450mm long with necessary G.I. J Bolts .Approx weight 29 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

62 arrangement for cable termination to be erected With Suitable no 65.00 5,501.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

450mm long with necessary G.I. J Bolts .Approx weight 37 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

63 arrangement for cable termination to be erected With Suitable no 5.00 6,806.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(C) 5 Mtr. Long 70 mm Top X 130 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 3 mm

thickness with 200mmX200mmX12mm base plate, 4-M16 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight 46 kg

ESTIMATE Page : 23 of

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

64 arrangement for cable termination to be erected With Suitable no 5.00 8,111.00

foundation (Included) as per details given by manufacturer

considering site requirement.(D) 6 Mtr. Long 70 mm Top X 135 mm

bottom dia (Tolerance are allowed in all octagonal pole top and

bottom dia +/-10%), 3 mm thickness with 200mmX200mmX12mm

base plate, 4-M20 Bolts and 600mm long with necessary G.I. J Bolts

.Approx Pole weight 59 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

65 arrangement for cable termination to be erected With Suitable no 5.00 11,299.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(E) 7 Mtr. Long 70 mm Top X 135 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 3 mm

thickness with 225mmX225mmX16mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts .Approx Pole weight 67 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

66 arrangement for cable termination to be erected With Suitable no 65.00 13,872.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(G) 8 Mtr. Long 70 mm Top X 155 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 3 mm

thickness with 260mmX260mmX16mm base plate, 4-M20 Bolts and

600mm long with necessary G.I. J Bolts Approx Pole weight 84 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

67 arrangement for cable termination to be erected With Suitable no 65.00 15,550.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(H) 9 Mtr. Long 70 mm Top X 155 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 3 mm

thickness with 260mmX260mmX16mm base plate, 4-M24 Bolts and

750mm long with necessary G.I. J Bolts .Approx Pole weight 97 kg

ESTIMATE Page : 24 of

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

68 arrangement for cable termination to be erected With Suitable no 65.00 19,577.00

foundation (Included) as per details given by manufacturer

considering site requirement.(I) 10 Mtr. Long 70 mm Top X 175 mm

bottom dia (Tolerance are allowed in all octagonal pole top and

bottom dia +/-10%), 4 mm thickness with 275mmX275mmX16mm

base plate, 4-M24 Bolts and 750mm long with necessary G.I. J Bolts

.Approx Pole weight 145 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

69 arrangement for cable termination to be erected With Suitable no 65.00 25,283.00

foundation (Included) as per details given by manufacturer

considering site requirement.

(J) 11 Mtr. Long 90 mm Top X 210 mm bottom dia (Tolerance are

allowed in all octagonal pole top and bottom dia +/-10%), 4 mm

thickness with 300mmX300mmX20mm base plate, 4-M24 Bolts and

750mm long with necessary G.I. J Bolts .Approx Pole weight 192 kg

Supplying and erecting approved make Octagonal pole made from

HR sheet steel. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/2633/4759, suitable

suspend local wind speed with integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile

35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable termination to be erected With Suitable

foundation (Included) as per details given by manufacturer

considering site requirement.

(K) 12 Mtr. Long 90 mm Top X 240 mm bottom dia, 4 mm thickness

with 320mmX320mmX20mm base plate, 4-M24 Bolts and 850mm

long with necessary G.I. J Bolts .Approx Pole weight 230 kg

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(A) 3 Mtr. Long 70 mm Top X 115 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%),3 mm

ESTIMATE Page : 25 of

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

73 Rail for MCB Mounting, stud type terminal and arrangement for cable no 33.00 8,065.00

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.(C)

Mtr. Long 70 mm Top X 145 mm bottom dia (Tolerance are allowed in

all conical pole top and bottom dia +/-10%), 3 mm thickness.

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(D) 6 Mtr. Long 70 mm Top X 160 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(E) 7 Mtr. Long 70 mm Top X 175 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

ESTIMATE Page : 26 of

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(F) 8 Mtr. Long 70 mm Top X 190 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

77 Rail for MCB Mounting, stud type terminal and arrangement for cable no 33.00 16,501.00

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.(G)

Mtr. Long 70 mm Top X 205 mm bottom dia (Tolerance are allowed in

all conical pole top and bottom dia +/-10%), 3 mm thickness

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(H) 10 Mtr. Long 80 mm Top X 220 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(I) 11 Mtr. Long 80 mm Top X 245 mm bottom dia (Tolerance are

allowed in all conical pole top and bottom dia +/-10%), 3 mm

ESTIMATE Page : 27 of

Supplying and erecting approved make Conical Pole (Medium Duty )

Made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/J-Bolts. as per details given by manufacturer

considering site requirement. The length of poles are as below.

(J) 12 Mtr. Long 80 mm Top X 260 mm bottom dia, 3 mm thickness

supplying & erecting 4.5 Meter G.I. (B Class ERW G.I.Pipes) Swaged

pole with Base Plate ,Single SMC Junction Box with all necessary

81 electrical mechanical accessories, Earthing jumper, Fastner, Lugs, 2 no 65.00 6,871.00

Nos.Cable Protection Pipes, Painting of pole with numbering etc as

per tender terms and conditions, Specifications and scope of work.

Supplying & erecting 5.5 Meter G.I.(B Class ERW G.I.Pipes) Swaged

pole with Base Plate ,Single SMC Junction Box with all necessary

82 electrical mechanical accessories, Earthing jumper, Fastner, Lugs, 2 no 1,604.00 7,403.00

Nos.Cable Protection Pipes, Painting of pole with numbering etc as

per tender terms and conditions, Specifications and scope of work.

Supplying & erecting 7.0 Meter G.I.(B Class ERW G.I.Pipes) Swaged

pole with Base Plate ,Single SMC Junction Box with all necessary

83 electrical mechanical accessories, Earthing jumper, Fastner, Lugs, 2 no 963.00 8,716.00

Nos.Cable Protection Pipes, Painting of pole with numbering etc as

per tender terms and conditions, Specifications and scope of work.

Supplying & erecting 9.5 Meter G.I.(B Class ERW G.I.Pipes) Swaged

pole with Base Plate ,Single SMC Junction Box with all necessary

84 electrical mechanical accessories, Earthing jumper, Fastner, Lugs, 2 no 1,283.00 12,870.00

Nos.Cable Protection Pipes, Painting of pole with numbering etc as

per tender terms and conditions, Specifications and scope of work.

SITC of extra junction box with all required accessories and one no.

cable protection GI pipe of 40 mm dia as per drawing.

SITC of extra junction box with all required accessories and two no.

cable protection GI pipe of 40 mm dia as per drawing.

ESTIMATE Page : 28 of

SITCof 9M Conical Bended Hot Dip Galvanized with PU Painted with

Top dia 75mm and Bottom Dia 170mm with pole thickness 3mm

along with Base plate 275mmx275mmx16mm with Single Arm

Bracket of 300mm with provision for 4 nos of foundation bolts. The

steel used for the manufacture of Pole shall comply with BSEN

with yield strength of 355 MP for Conical Pole shaft or equivalent and

the material for the base plate, bracket, flange plates, shall be

equivalent to or better than IS 2062. Hot Dip Galvanizing shall be in

accordance with IS 2629 or latest IS specification. The poles should

be Hot Dip Galvanized to give average thickness of galvanization as

per IS 4759/ BSEN 1461 standards – 65 microns.Test report to be

submitted by manufacturer. All components of the pole and brackets

shall be hot dip galvanized after completion of fabrication.No further

87 touching up finalizing or modification shall be done after galvanizing. no 65.00 43,700.00

The overall length of each section bracket is immersed in one dipping

operation to ensure smooth and aesthetic finish. No repetition

allowed. They shall be designed and fabricated from such material

and provided with such finish so as to withstand atmospheric

conditions.The poles are to be designed for maximum wind speed of

47 m/s (169 km /hr.) (IS 875 Part-III). The pole shall be evenly

tapered from base to top. The pole shall preferably be fabricated in

section. There shall be no circumferential welded joint in Poles. All

welds shall ensure no fissures inside or outside or outsides surfaces,

and no blowholes. Within the pole there must be Din rail Mounting

provision for MCB & Electrical Connector. Pole must be with 300m

single bracket arm as per shown in drawing. Make / As per approved

SITC of 4M Conical Bended Hot Dip Galvanized with PU Painted with

Top dia 70mm and Bottom Dia 118mm with pole thickness 3mm

along with Base plate 200mmx200mmx12mm with Single Arm

Bracket of 300mm with provision for 4 nos of foundation nut & bolt.

The steel used for the manufacture of Pole shall comply with BSEN

10025 with yield strength of 355 MP for Conical Pole shaft or

equivalent and the material for the base plate, bracket, flange plates,

shall be equivalent to or better than IS 2062. Hot Dip Galvanizing

shall be in accordance with IS 2629 or latest IS specification. The

poles should be Hot Dip Galvanized to give average thickness of

galvanization as per IS 4759/ BSEN 1461 standards –

microns.Test report to be submitted by manufacturer. All components

of the pole and brackets shall be hot dip galvanized after completion

88 of fabrication.No further touching up finalizing or modification shall be no 33.00 20,125.00

done after galvanizing. The overall length of each section bracket is

immersed in one dipping operation to ensure smooth and aesthetic

finish. No repetition allowed. They shall be designed and fabricated

from such material and provided with such finish so as to withstand

atmospheric conditions.The poles are to be designed for maximum

wind speed of 47 m/s (169 km /hr.) (IS 875 Part-III). The pole shall be

evenly tapered from base to top. The pole shall preferably be

fabricated in section. There shall be no circumferential welded joint in

Poles. All welds shall ensure no fissures inside or outside or outsides

surfaces, and no blowholes. Within the pole there must be Din rail

Mounting provision for MCB & Electrical Connector. Pole must be with

300m single bracket arm as per shown in drawing. / As per approved

ESTIMATE Page : 29 of

SITC of Decorative Pole of 4.2 M column structure with an aesthetic

curved designed single arm decorative bracket. The Pole Shaft

should be fabricated out of Steel tube of grade YST 240. Structurally

designed base plate of Steel Steel of grade E250 Conforming to IS

226/ IS 2062 should be welded with the pole shaft. The structure

should be completely hot-dip galvanized and surface finished with PU

paint. The pole should be of large section at the base with height of

2.7M made up of Tapered fabricated sheet as per IS 1079, welded

with pipe dia of 140mm through which one single ended branch

coming out with dia. 60mm. The base plate shall be of

370mmx370mmx16mm suitable for mounting on 4 nos foundation

bolts. The pole shall be made of Mild Steel with Hot Dip Galvanizing

coating including base plate as per ASTM A123. The pole shall be of

‘composite’ construction designed to withstand specified ‘dead load’

pertaining to the luminaire and its mounting accessories and ‘wind

load’ corresponding to a basic wind speed of 169 kmph without any

deformation or damage to the structure. The welding shall be of high

quality, carried out by qualified welders using approved welding

procedures and tested for its quality through NDT method, such as

DP Test. The pole shaft structure shall be hot dip galvanized through

single dip process as per ASTM A123 and minimum average coating

shall not be less than 65 microns. No mechanical operation, such as

welding, drilling, etc. should be carried out on the pole structure post

hot dip galvanizing. The poles shall have door of about 470 mm

length and shall be vandal resistance and shall be weather proof to

ensure safety of inside connection as approved by the Depts. The

door shall be flush with the exterior surface and shall have suitable

locking arrangement with provision for connectors, MCB, etc. (to be

supplied by others). Complete pole shall be treated with high quality

epoxy zinc primer and thereafter coated with environmentally stable

Polyurethane paint to minimum average DFT of 70 microns. Kesslec

STYLE POLE/ Reytek / Neri Make / As per approved make list.

ESTIMATE Page : 30 of

SITCof Decorative Pole of 9M column structure with an aesthetic

curved designed Double arm decorative bracket. The Pole Shaft

should be fabricated out of Steel tube of grade YST 240. Structurally

designed base plate of Steel Steel of grade E250 Conforming to IS

226/ IS 2062 should be welded with the pole shaft. The structure

should be completely hot-dip galvanized and surface finished with PU

paint. The pole should be of large section at the base with height of

4M made up of Tapered fabricated sheet as per IS 1079, welded with

pipe dia of 165mm through which two single ended branch coming

out with dia. 76mm. The base plate shall be of

370mmx370mmx16mm suitable for mounting on 4 nos foundation

bolts. The pole shall be made of Mild Steel with Hot Dip Galvanizing

coating including base plate as per ASTM A123. The pole shall be of

‘composite’ construction designed to withstand specified ‘dead load’

pertaining to the luminaire and its mounting accessories and ‘wind

load’ corresponding to a basic wind speed of 169 kmph without any

deformation or damage to the structure. The welding shall be of high

quality, carried out by qualified welders using approved welding

procedures and tested for its quality through NDT method, such as

DP Test. The pole shaft structure shall be hot dip galvanized through

single dip process as per ASTM A123 and minimum average coating

shall not be less than 65 microns. No mechanical operation, such as

welding, drilling, etc. should be carried out on the pole structure post

hot dip galvanizing. The poles shall have door of about 470 mm

length and shall be vandal resistance and shall be weather proof to

ensure safety of inside connection as approved by the Depts. The

door shall be flush with the exterior surfa ce and shall have suitable

locking arrangement with provision for connectors, MCB, etc. (to be

supplied by others). Complete pole shall be treated with high quality

epoxy zinc primer and thereafter coated with environmentally stable

Polyurethane paint to minimum average DFT of 70 microns.Make / As

per approved make list.

ESTIMATE Page : 31 of

SITC of 4 Mtr height Urban Street Light Pole Hot dip Galvanized and

PU painted having pipe size of 100x100 mm square pipe (as per

drawing) with thickness of 3 mm Pole shall be mounted on square

base plate 200*200 *12 mm thickness suitable for mounting on 4 nos

foundation bolts. The pole must have a provision of extended Single

Arm bracket of 500mm length with the provision of integrated IP66

luminaire protected with an IK08 rated polycarbonate lens and

separate control gear compartment. Overall System efficacy at

130Lm/W at 4000K CCT. Surge Protection provided at 10kV for both

Common and Differential mode. The Pole Shaft should be fabricated

out of Steel tube of grade YST 240. Structurally designed base plate

of Steel Steel of grade E250 Conforming to IS 226/ IS 2062 should be

welded with the pole shaft. The pole shall be of ‘composite’

construction designed to withstand specified ‘dead load’ pertaining to

the luminaire and its mounting accessories and ‘wind load’

corresponding to a basic wind speed of 169 kmph without any

91 deformation or damage to the structure. The welding shall be of high no 6.00 20,125.00

quality, carried out by qualified welders using approved welding

procedures and tested for its quality through NDT method, such as

DP Test. The pole shaft structure shall be hot dip galvanized through

single dip process as per ASTM A123 and minimum average coating

shall not be less than 65 microns. No mechanical operation, such as

welding, drilling, etc. should be carried out on the pole structure post

hot dip galvanizing. The poles shall have door of about 250 mm

length and shall be vandal resistance and shall be weather proof to

ensure safety of inside connection as approved by the Depts. The

door shall be flush with the exterior surface and shall have suitable

locking arrangement with provision for connectors, MCB, etc. (to be

supplied by others). Complete pole shall be treated with high quality

epoxy zinc primer and thereafter coated with environmentally stable

Polyurethane paint to minimum average DFT of 70 microns in closed

paint booth chamber.The pole manufacture must have ISO

ESTIMATE Page : 32 of

SITCof 9Mtr height Urban Street Light Pole Hot dip Galvanized and

PU painted having pipe size of 150x150 mm square pipe (as per

drawing). Pole shall be mounted on square base plate 300*300 *16

mm thickness suitable for mounting on 4 nos foundation bolts. The

pole must have a provision of extended Single Arm bracket of 1M

length with the provision of integrated IP66 luminaire protected with

an IK08 rated polycarbonate lens and separate control gear

compartment. Overall System efficacy at 110Lm/W at 4000K CCT.

Surge Protection provided at 10kV for both Common and Differential

mode. The Pole Shaft should be fabricated out of Steel tube of grade

YST 240. Structurally designed base plate of Steel Steel of grade

E250 Conforming to IS 226/ IS 2062 should be welded with the pole

shaft. The pole shall be of ‘composite’ construction designed to

withstand specified ‘dead load’ pertaining to the luminaire and its

mounting accessories and ‘wind load’ corresponding to a basic wind

92 speed of 169 kmph without any deformation or damage to the no 6.00 43,700.00

structure. The welding shall be of high quality, carried out by qualified

welders using approved welding procedures and tested for its quality

through NDT method, such as DP Test. The pole shaft structure shall

be hot dip galvanized through single dip process as per ASTM A123

and minimum average coating shall not be less than 65 microns. No

mechanical operation, such as welding, drilling, etc. should be carried

out on the pole structure post hot dip galvanizing. The poles shall

have door of about 250 mm length and shall be vandal resistance and

shall be weather proof to ensure safety of inside connection as

approved by the Depts. The door shall be flush with the exterior

surface and shall have suitable locking arrangement with provision for

connectors, MCB, etc. (to be supplied by others). Complete pole shall

be treated with high quality epoxy zinc primer and thereafter coated

with environmentally stable Polyurethane paint to minimum average

DFT of 70 microns./ As per approved make list.

ESTIMATE Page : 33 of

SITC of 9Mtr height Urban Street Light Pole Hot dip Galvanized and

PU painted having pipe size of 150x150 mm square pipe (as per

drawing) with thickness of 3 mm . Pole shall be mounted on square

base plate 300*300 *16 mm thickness suitable for mounting on 4 nos

foundation bolts. The pole must have a provision of extended Single

Arm bracket of 1.25M length with the provision of integrated IP66

luminaire protected with an IK08 rated polycarbonate lens and

separate control gear compartment. Overall System efficacy at

130Lm/W at 4000K CCT. Surge Protection provided at 10kV for both

Common and Differential mode. The Pole Shaft should be fabricated

out of Steel tube of grade YST 240. Structurally designed base plate

of Steel Steel of grade E250 Conforming to IS 226/ IS 2062 should be

welded with the pole shaft. The pole shall be of ‘composite’

construction designed to withstand specified ‘dead load’ pertaining to

the luminaire and its mounting accessories and ‘wind load’

corresponding to a basic wind speed of 169 kmph without any

deformation or damage to the structure. The welding shall be of high

quality, carried out by qualified welders using approved welding

procedures and tested for its quality through NDT method, such as

DP Test. The pole shaft structure shall be hot dip galvanized through

single dip process as per ASTM A123 and minimum average coating

shall not be less than 65 microns. No mechanical operation, such as

welding, drilling, etc. should be carried out on the pole structure post

hot dip galvanizing. The poles shall have door of about 250 mm

length and shall be vandal resistance and shall be weather proof to

ensure safety of inside connection as approved by the Depts. The

door shall be flush with the exterior surface and shall have suitable

locking arrangement with provision for connectors, MCB, etc. (to be

supplied by others). Complete pole shall be treated with high quality

epoxy zinc primer and thereafter coated with environmentally stable

Polyurethane paint to minimum average DFT of 70 microns. Kesslec

WAKEFIELD 9M / Reytek / Neri Make / As per approved make list.

SITC of Type-A, Any kind of 3 to 4.5 mtr ht. Post top lantern Pole (

With Basic Rate of Rs. 22500/-)

SITC of Type-B, Any kind of 5 to 5.9 mtr ht. Post top lantern Pole (

With Basic Rate of Rs. 30000/-)

SITC of Type-C, Any kind of 6 Mtr. Ht. to 7.9 Mtr. Ht. Decorative

Street Light Pole ( with Basic Rate of Rs.35000/-)

SITC of Type-D, Any kind of 8 Mtr. Ht. Decorative Street Light Pole (

with Basic Rate of Rs.40000/-)

SITC of Type-E, Any kind of 9 Mtr. Ht. to 12 Mtr. Ht. Decorative Street

Light Pole ( with Basic Rate of Rs.45000/-)

SITC of Any kind of 0.1 to 2Mtr. Decorative Single Arm Bracket ( with

Basic Rate of Rs.7500/-) however not limited to this only.

SITC of Any kind of 0.1 to 2Mtr. Decorative Double Arm Bracket ( with

Basic Rate of Rs.10000/-) however not limited to this only.

SITC of Any kind of 0.1 to 2Mtr. Decorative Three Arm Bracket ( with

Basic Rate of Rs.12000/-) however not limited to this only.

SITC of Smart pole as per the Drawings / Specification As per

approved make list.

SITC of cement concrete.for foundation or for concrete filling in 1:2:4

103 ratio with 20 to 25 mm stone metal duly plastered with necessary Cu.Mtr 1,056.00 5,077.00

curing for pole muffing or any other purpose.

SITC of TMT Bar FE 500/500D reinforcement for RCC work including

bending, binding and placing in position complete upto floor two level.

ESTIMATE Page : 34 of

SITC of 0.1 to 2 Mtr G.I.bracket with 2 coat P.U. Paint with primer(Any

Arm Bracket as per architect design).

Note : Sample must be Approved from Client / Architect / Consultant

SITC of FRP/GRP arm bracket of having 15˚ arm with 50 mm OD

pipe *5 mm thk,1000mm long from pole centre (A) Single arm bracket

SITC of FRP/GRP arm bracket of having 15˚ arm with 50 mm OD

107 pipe *5 mm thk,1000mm long from pole centre no 66.00 2,390.00

(B) Double arm bracket

Supplying & erecting approved make AMC press moulded composite

FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite

connector strip 5way(3P+N+E),DIN rail for mounting mob & hinged

108 doors as per requirement having locking arrangements with mounting no 15.00 890.00

clamp with nuts, bolts & washers suitable for erection on pole with

cable clamps& earth bolt of following size of box.

(A) 300mm x 200mm x 100mm [deep]

SITC of electric insulating paint having quantity of paint suitable to

apply upto 6 feet on pole with 5 KV strength and following

specifications:

109 (Hig electric strength 55 kv/mm, stable upto 200 degree temprature, no 1,444.00 1,530.00

excellent puncture resistant, resistance to fire, excellent resestance to

UV radiation, tough & scratch resistant excellent resistant to

Total Amount of Street Light Pole & Bracket

Total Amount of Street Light Pole & Bracket

: Luminaries with all electrical accessories are prewired upto the

terminal block & mounted on a removable control gear module for

ease of maintenance. All electrical connections of the control gear

module with the rest of the luminaire should be easily maintainable.

Mounting options should be for pole top mounting

. Note : All Outdoor Fixture should be minimum IP66

Supply and installation of LED street light luminaire with system

power (20W)± 5% , Available in color temperature (4000K-5700K),

CRI>70, SDCM<3 , LEDs used have a life of 50,000 burning hrs. &

Lumen maintenance as per L70 with high power white LEDs wattage

of 3 Watt and above assembled on MCPCB. The Luminaire System

efficacy should be of ≥160LPW at 5700K / ≥150LPW at 4000K /

≥135LPW at 3000K. The fixture housing must be Made of ADC

PDC Aluminum housing for rapid thermal healing & Powder coated by

Corrosion resistant Nano coating technology. The luminaire PCB

Used for Making Light Engine should be Metal Core PCB made of

high grade Al 5052 with minimum 70 micron copper thickness &

W/mk thermal conductivity for better thermal maintenance for light

Engines. Luminaire must have a Ingress protection of IP66 and

Impact Resistance of IK08. The fixture should have an Injection

moulded special PC lens optics ensuring low glare & best in class

uniformity of >0.45. The luminaire must have Integral encapsulated

high efficiency electronic driver of efficiency > 85% having a

Aluminum extrusion construction with rated voltage of 140-270V,

power factor > 0.95, THD < 10%, with Inbuilt surge protection of 10KV

and upgraded with integrated IP67 protected SPD of 20KV/10KA

surge protection with all necessary safety protection like mis-wiring,

Over voltage, Short circuit, Reverse Polarity protection.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-

IES, LM 79, LM 80, & TTC certificates will be provided from NABL

accredited lab.

ESTIMATE Page : 35 of

Supply and installation of LED Street light luminaire with system

power (45W)± 5% , Available in color temperature (4000K-5700K)

CRI>70, SDCM<3 , LEDs used have a life of 50,000 burning hrs. &

Lumen maintenance as per L70 with high power white LEDs wattage

of 3 Watt and above assembled on MCPCB, efficiency more than

150 lm/w. The Luminaire System efficacy should be of >=135LPW. .

The Luminaire System efficacy should be of ≥160LPW at 5700K /

≥150LPW at 4000K / ≥135LPW at 3000K The fixture housing must be

Made of ADC 12 PDC Aluminium housing for rapid thermal healing &

Powder coated by Corrosion resistant Nano coating technology. The

luminaire PCB Used for Making Light Engine should be Metal Core

PCB made of high grade Al 5052 with minimum 70 micron copper

thickness & 2 W/mk thermal conductivity for better thermal

111 maintanance for light Engines. Luminaire must have a Ingress no. 1,059.00 3,312.00

protection of IP66 and Impact Resistance of IK08. The fixture should

have an Injection moulded special PC lens optics ensuring low glare

& best in class uniformity of >0.45. The luminaire must have Integral

encapsulated high efficiency electronic driver of efficiency > 85%

having a Aluminium extrusion construction with rated voltage of 140-

270V, power factor > 0.95, THD < 10%, with Inbuilt surge protection

of 10KV and upgraded with integrated IP67 protected SPD of

20KV/10KA surge protection with all necessary safety protection like

mis-wiring, Over voltage, Short circuit, Reverse Polarity

protection.Luminaire performance & Safety :IEC 60598, IS 10322-5,

IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015IES, LM

79, LM 80, & TTC certificates will be provided from NABL accredited

112 Technical specifications as Above (#111) no. 33.00 3,312.00

Supply and installation of LED street light luminaire with system

power (60W)± 5% , Available in color temperature (3000K-5700K)

CRI>70, SDCM<3 , LEDs used have a life of 50,000 burning hrs. &

Lumen maintenance as per L70 with high power white LEDs wattage

of 3 Watt and above assembled on MCPCB. The Luminaire System

efficacy should be of ≥160LPW at 5700K / ≥150LPW at 4000K /

≥135LPW at 3000K. The fixture housing must be Made of ADC

PDC Aluminium housing for rapid thermal healing & Powder coated

by Corrosion resistant Nano coating technology. The luminaire PCB

Used for Making Light Engine should be Metal Core PCB made of

high grade Al 5052 with minimum 70 micron copper thickness &

W/mk thermal conductivity for better thermal maintanance for light

Engines.Luminaire must have a Ingress protection of IP66 and Impact

Resistance of IK08. The fixture should have an Injection moulded

special PC lens optics ensuring low glare & best in class uniformity of

>0.45. The luminaire must have Integral encapsulated high efficiency

electronic driver of efficiency > 85% having a Aluminium extrusion

construction with rated voltage of 140-270V, power factor > 0.95, THD

< 10%, with Inbuilt surge protection of 10KV and upgraded with

integrated IP67 protected SPD of 20KV/10KA surge protection with all

necessary safety protection like mis-wiring, Over voltage, Short

circuit, Reverse Polarity protection.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-

IES, LM 79, LM 80, & TTC certificates will be provided from NABL

accredited lab.

114 Technical specifications as Above (#113) no. 33.00 4,948.00

ESTIMATE Page : 36 of

Supply and installation of LED street light luminaire with Dimmable

Driver with system power (90W )± 5% , Available in color temperature

(3000K-5700K) , CRI>70, SDCM<3, LEDs used have a life of

burning hrs. & Lumen maintenance as per L90 with high power white

LEDs wattage of 3 Watt and above assembled on MCPCB. The

Luminaire System efficacy should be of ≥160LPW at 5700K /

≥150LPW at 4000K / ≥135LPW at 3000K. The fixture housing must

be Made of ADC 12 PDC Aluminum housing for rapid thermal healing

& Powder coated by Corrosion resistant Nano coating technology.

The luminaire PCB Used for Making Light Engine should be Metal

Core PCB made of high grade Al 5052 with minimum 70 micron

copper thickness & 2 W/mk thermal conductivity for better thermal

maintenance for light Engines. Luminaire must have a Ingress

protection of IP66 and Impact Resistance of IK08. The fixture should

have an Injection moulded special PC lens optics ensuring low glare

& best in class uniformity of >0.45. The luminaire must have Integral

encapsulated high efficiency electronic driver of efficiency > 85%

having a Aluminum extrusion construction with rated voltage of 140-

270V, power factor > 0.95, THD < 10%, with Inbuilt surge protection

of 10KV and upgraded with integrated IP67 protected SPD of

20KV/10KA surge protection with all necessary safety protection like

mis-wiring, Over voltage, Short circuit, Reverse Polarity

protection.Luminaire performance & Safety :IEC 60598, IS 10322-5,

IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015IES, LM

79, LM 80, & TTC certificates will be provided from NABL accredited

116 Technical specifications as above (#115) no. 33.00 5,917.00

Supply and installation of LED street light luminaire with Dimmable

Driver with system power (120W)± 5% , Available in color

temperature (4000K-5700K) , CRI>70, SDCM<3 , LEDs used have a

life of 100,000 burning hrs. & Lumen maintenance as per L90 with

high power white LEDs wattage of 3 Watt and above assembled on

MCPCB. The Luminaire System efficacy should be of ≥160LPW at

5700K / ≥150LPW at 4000K / ≥135LPW at 3000K. The fixture housing

must be Made of ADC 12 PDC Aluminum housing for rapid thermal

healing & Powder coated by Corrosion resistant Nano coating

technology. The luminaire PCB Used for Making Light Engine should

be Metal Core PCB made of high grade Al 5052 with minimum

micron copper thickness & 2 W/mk thermal conductivity for better

thermal maintenance for light Engines. Luminaire must have a

117 Ingress protection of IP66 and Impact Resistance of IK08. The fixture no. 514.00 6,501.00

should have an Injection moulded special PC lens optics ensuring low

glare & best in class uniformity of >0.45. The luminaire must have

Integral encapsulated high efficiency electronic driver of efficiency >

85% having a Aluminum extrusion construction with rated voltage of

140-270V, power factor > 0.95, THD

< 10%, with Inbuilt surge protection of 10KV and upgraded with

integrated IP67 protected SPD of 20KV/10KA surge protection with all

necessary safety protection like mis-wiring, Over voltage, Short

circuit, Reverse Polarity protection.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-

IES, LM 79, LM 80, & TTC certificates will be provided from NABL

accredited lab.

118 Technical specifications as above (#117) no. 1,219.00 6,501.00

ESTIMATE Page : 37 of

Supply and installation of LED street light luminaire with Dimmable

Driver with system power (150W)± 5% , Available in color

temperature (3000K-5700K) ,CRI>70, SDCM<3 , LEDs used have a

life of 100,000 burning hrs. & Lumen maintenance as per L90 with

high power white LEDs wattage of 3 Watt and above assembled on

MCPCB. The Luminaire System efficacy should be of ≥160LPW at

5700K / ≥150LPW at 4000K / ≥135LPW at 3000K. The fixture housing

must be Made of ADC 12 PDC Aluminum housing for rapid thermal

healing & Powder coated by Corrosion resistant Nano coating

technology. The luminaire PCB Used for Making Light Engine should

be Metal Core PCB made of high grade Al 5052 with minimum

micron copper thickness & 2 W/mk thermal conductivity for better

thermal maintenance for light Engines. Luminaire must have a

Ingress protection of IP66 and Impact Resistance of IK08. The fixture

should have an Injection moulded special PC lens optics ensuring low

glare & best in class uniformity of >0.45. The luminaire must have

Integral encapsulated high efficiency electronic driver of efficiency >

85% having a Aluminum extrusion construction with rated voltage of

140-270V, power factor > 0.95, THD< 10%, with Inbuilt surge

protection of 10KV and upgraded with integrated IP67 protected SPD

of 20KV/10KA surge protection with all necessary safety protection

like mis-wiring, Over voltage, Short circuit, Reverse Polarity

protection.Luminaire performance & Safety :IEC 60598, IS 10322-5,

IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015IES, LM

79, LM 80, & TTC certificates will be provided from NABL accredited

120 Technical specifications as above (#119) no. 770.00 7,798.00

Supply and installation of LED street light luminaire with Dimmable

Driver with system power (170W)± 5% , Available in color

temperature (3000K-5700K) , CRI>70, SDCM<3 , LEDs used have a

life of 100,000 burning hrs. & Lumen maintenance as per L90 with

high power white LEDs wattage of 3 Watt and above assembled on

MCPCB. The Luminaire System efficacy should be of ≥160LPW at

5700K / ≥150LPW at 4000K / ≥135LPW at 3000K. The fixture housing

must be Made of ADC 12 PDC Aluminum housing for rapid thermal

healing & Powder coated by Corrosion resistant Nano coating

technology. The luminaire PCB Used for Making Light Engine should

be Metal Core PCB made of high grade Al 5052 with minimum

micron copper thickness & 2 W/mk thermal conductivity for better

thermal maintenance for light Engines. Luminaire must have a

121 Ingress protection of IP66 and Impact Resistance of IK08. The fixture no. 129.00 9,018.00

should have an Injection moulded special PC lens optics ensuring low

glare & best in class uniformity of >0.45. The luminaire must have

Integral encapsulated high efficiency electronic driver of efficiency >

85% having a Aluminum extrusion construction with rated voltage of

140-270V, power factor > 0.95, THD

< 10%, with Inbuilt surge protection of 10KV and upgraded with

integrated IP67 protected SPD of 20KV/10KA surge protection with all

necessary safety protection like mis-wiring, Over voltage, Short

circuit, Reverse Polarity protection.

Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-

IES, LM 79, LM 80, & TTC certificates will be provided from NABL

accredited lab.

122 Technical specifications as above (#121) no. 707.00 9,018.00

ESTIMATE Page : 38 of

Supply and installation of LED Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on MCPCB,

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminum with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V, Power

Factor more than 0.95, THD < 10 %, CCT 4000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 145 lumens/watt . LED driver

efficiency > 85%.( fittings required LM-79 & LM-80 certificates)

(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings. The Engineer in charge may select any wattage capacity

between the ranges shown.)(B) Flood Light (IP-66), Surge protection

10KV integral and, Light must have 440VAC line supply with over-

voltage protection.(iii) above 90 watts Watts

Supply and installation of LED Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on MCPCB,

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminum with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V, Power

Factor more than 0.95, THD < 10 %, CCT 4000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 145 lumens/watt . LED driver

%.( fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.

The Engineer in charge may select any wattage capacity between the

(B) Flood Light (IP-66), Surge protection 10KV integral and, Light

must have 440VAC line supply with over-voltage protection.

(iv) above 120 watts

Supply and installation of LED Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on MCPCB,

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V,Power

Factor more than 0.95, THD < 10 %, CCT 4000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 145 lumens/watt . LED driver

%.( fittings required LM-79 & LM-80 certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.)

(B) Flood Light (IP-66), Surge protection 10KV integral and ,Light

must have 440VAC line supply with over-voltage protection.

(v) above 160 watts

ESTIMATE Page : 39 of

Supply and installation of LED Flood light fittings with High power

White LEDs wattage of 3 Watt and above assembled on MCPCB,

corrosion free High pressure die cast aluminum housing with smooth

finish powder coated and heat sink extruded aluminum with diffuser

and Polycarbonate optics/ lenses, with toughened glass with

company mark/name engraved or embossed 160 to 270 V, Power

Factor more than 0.95, THD < 10 %, CCT 4000 K to 5700K,Uniformity

ratio >0.45, Luminaire efficacy> 145 lumens/watt . LED driver

%.( fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.

The Engineer in charge may select any wattage capacity between the

(B) Flood Light (IP-66), Surge protection 10KV integral and, Light

must have 440VAC line supply with over-voltage protection.

(vi) above 200 Watts

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminum with diffuser and

Polycarbonate optics/ lenses, with toughened glass with company

mark/name engraved or embossed 160 to 270 V, Power Factor more

than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.(

fittings required LM-79 & LM-80 certificates) (NOTE: Below

description have shown ranges of Wattage capacity of LED fittings.

The Engineer in charge may select any wattage capacity between the

ranges shown.)(C) Post Top Lantern LED fitting comprises of finish

cast aluminum spigot and spun aluminum canopy fixed with opal

polycarbonate, pipe arrangement for vertical mounting driver and

accessories wired upto terminal block. IP 66(ii)32-40W

SITC of Type – A Any kind of Light fixture ( with Basic Rate of

SITC of Type – B Any kind of Light fixture ( with Basic Rate of

SITC of Type – C Any kind of Light fixture ( with Basic Rate of

SITC of Type – D Any kind of Light fixture ( with Basic Rate of

SITC of Type – E Any kind of Light fixture ( with Basic Rate of

SITC of Type – F Any kind of Light fixture ( with Basic Rate of

Total Amount of Light Fixtures

Total Amount of Light Fixtures

Plate Type Earthing

Supplying & erecting funnel type earthing having earth plate of

following size burred in specifically prepared earth pit 3 mtr. below

ground with 40 kg. charcoal and salt with alternate layers of charcoal

& salt, 20mm.dia. G.I. pipe with Funnel with a wire mesh for watering

& bricks masonry block, C.I. Cover complete as per para 7.3 of IS

3043 with necessary length of double Galvanised Iron / copper earth

wire No 6 SWG bolted with lug to the plate and covered in 12 mm dia.

G.I. pipe 2.5 mtr long complete connected to the nearest switch gear

with end socket as per direction & duly tested by earth tester

confirming to IS (As per drawing) with following specification

134 (C) with 60 x 60x 0.315 cms. Copper earth Plate no 4.00 7,797.00

135 (B) With 45 x 45 x 0.35 cms. G.I. earth plate no 6.00 2,543.00

Chemical Type Earthing -

ESTIMATE Page : 40 of

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of Copper Pipes having Outer

pipe dia of 50mm having , Inner pipe dia of 40 mm , connection

terminal dia of 14 mm with constant ohmic value surrounded by

highly conductive compound with high charge dissipation suitable for

following type of applications.

(a) For Electrical Installation up to 440V in normal soil Length of pipe -

Back filling compound - 1 Nos Bag of 15 Kg.

(a) For Electrical Installation up to 440V in normal soil Length of pipe -

Back filling compound - 1 Nos Bag of 25 Kg.

Pipe type earthing with 40 mm dia 2.5 mtr long 'B' grade G.I. pipe with

138 necessary coupling buch buried in specially prepared earth pit & G.I. Ea. 2,887.00 815.00

earth wire of 8 SWG erected & connected as directed (For panel)

Earth wire/strips : -

Supply and laying required size Cu/GI. earthing strips for

interconnecting the earthing stations, panels, section piller etc. in built

up trenches, on walls/ceiling, buried in ground generally as specified

and shown on drawings complete with :a) Fixing

accessories.b) Corrosion protection of buried conductors with

bituminous coating and covered with PVC tapes.

140 No.8 gauge bare cu. earth wire Kg. 219.00 787.00

Providing and erecting HOT deep Galvanised iron strip/ wire 8 to

Total Amount of Earthing

Total Amount of Earthing

Pole dismantling, carting and to submit at AMC store. ( 4 mtr to 10 mtr

The temporary illumination work

Providing of minimum of 10 nos. of LED Flood light minimum

Watt flood light and its temporary wiring in each job in existing road /

service road as per client requirement

Providing , erecting , fabricating the M.S. structure as per requirment

on site incorporatingproper size of M.S. angles, flats, bars, channels,

pipes, sections, Sheets & for the pole swaging with the suitable dia

144 pipe complete with cutting, welding, grinding & finishing duly painted Kg 2,887.00 77.00

with two coat of redoxide with erection on site as per direction of

engineer in charge with necessary gouting, cementing, plastering &

finishing complete as per the instruction of the engineer incharge.

Total Amount of Miscellaneous

Total Amount of Miscellaneous

ESTIMATE Page : 41 of