Construction of Anganwadi Bulding at Various Villages of Kaprada & Nanapondha Taluka, Dist. Valsad (KPR/Aganwadi-1, Total 5 nos Work) (1) Chavshala (2) Chepa -1 (3) Gotvel Vachla Faliya (4)Panas -2 (5) Suliya -2

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Excavation for foundation upto 1.5 m depth including 78.00 CMT. 149.83

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (B)

Dense or Hard Soil ( I ) 0 To 1.5 mt. Depth

2 Excavation for foundation for depth from 1.5 m to 3.0 m 39.00 CMT. 162.56

including sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead.(B)

Dense and Hard Soil ( II ) 1.5 To 3.0 MT Depth

3 Filling available excavated earth (Including rock in 47.50 CMT. 130.39

trenches plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering)

4 Providing & filling in plinth with murrum or yellow soil or 127.35 CMT. 289.06

ramming & consolidation etc. complete.

5 Filling in plinth with sand under floors including 22.50 CMT. 460.19

watering ramming, consolidating and dressing

complete (A) Foundation and plinth

6 Providing and laying cement concrete 1:3:6 (1- Cement : 36.80 CMT. 3313.29

3- Coarse sand : 6- graded stone aggregates 20 mm

nominal size) and curing complete including cost of

formwork in (A) PCC

7 Providing and laying Ordinary cement concrete M.250 and 22.70 CMT. 4683.40

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in foundation, footings base of column and

mass concrete. (A) Footing

8 Providing and laying Ordinary cement concrete M.250 and 6.80 CMT. 8577.93

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts , upto Plinth

9 Providing and laying Ordinary cement concrete M.200 and 11.25 CMT. 8542.58

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column, Pillers,

posts and struts, upto Ground Floor

10 Providing and laying Ordinary cement concrete M.200 and 1.90 CMT. 8582.97

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Column D) Column,

Pillers, posts and struts, upto First Floor

11 Providing and laying Ordinary cement concrete M.250 and 32.60 CMT. 6637.72

curing complete inculding the cost of formwork but

Excluding the cost of the cost of reinforcement for

reinforced concrete work in Beams. (E) Beam, upto

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

12 Providing and laying Ordinary cement concrete M.200 and 20.00 CMT. 6599.34

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Beams,(E) Beam, Ground

13 Providing and laying Ordinary cement concrete M.200 and 26.45 CMT. 6167.06

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in All Types of Slab,All Thickness (C) Slab

upto Plinth and Ground Floor

14 Providing and laying Ordinary cement concrete M.200 and 1.35 CMT. 6788.22

curing complete inculding the cost of formwork but

Excluding the cost of reinforcement for reinforced

concrete work in Chajja. Upto Ground Floor

15 Providing TMT Bar FE 500D reinforcement for R.C.C. 12980.00 Kg . 76.23

work including bending, binding and placing in position

complete upto floor two level,Ground Floor, First Floor

Second Floor, Third Floor, Terrace Floor (all floor).

16 Brick work using common brunt clay building bricks 166.15 CMT. 4295.99

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional Ground Floor

17 Brick work using common brunt clay building bricks 17.75 CMT. 4336.18

having crushing strength not less than 35 kg/sqcm. in

superstructure above plinth level upto floor two level in

cement mortar 1:6 (1 cement :6 fine sand) etc.comp. (B)

Conventional First Floor

18 Half brick masonry in common brunt clay building bricks 56.70 SMT. 716.37

having crushing strength not less than 35 Kg/Sq.Cm. in

Cement mortar 1:3 (1- Cement : 3 -coarse sand ) in (B)

Conventional Ground Floor

19 Providing 15mm thick cement plaster in single coat on 667.15 SMT. 171.80

Rough (Similar)side of single or Full/half brick walls for

interior plastering upto floor two level and finished even

and smooth in (ii) Cement mortar 1:3 (1-cement :3-sand)

Ground Floor

20 Providing & laying10 mm. thick cement plaster in single 229.15 SMT. 153.67

coat on fair side of ceilings for interior plastering upto

floor two level and finishing with smooth mala plaster.(i)

Cement mortar 1:3 (1 cement : 3 sand) Ground Floor

21 20mm thick sand faced cement plaster on walls upto height 872.45 SMT. 300.66

10 metres above ground level consisting of 12mm thick

backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm

thick finishing coat of C.M. 1:1 (1-cement : 1-sand) etc.

22 Providing throating or plaster drip and moulding to R.C.C. 30.00 RMT. 42.17

23 Providing and laying polished Granite Slab 18mm thick in 49.60 SMT. 2234.12

Flooring laid 20mm thick Cement Mortar 1:4 (1-Cement :

4-Coarse Sand) and jointed with Grey Cement Slurry

including full molded round front edges , rubbing and

polishing etc. complete.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

24 Providing and laying polished Granite Slab 18mm thick in 73.45 SMT. 2486.62

Risers of steps Dedo, window sill, jembs and pillars laid

10 mm thick Cement Mortar 1:4 (1-Cement : 4-Coarse

Sand) and jointed with Grey Cement Slurry including full

molded round edges , rubbing an

25 Providing and laying Vitrified tiles, 24'' x 24'' in flooring 276.70 SMT. 1073.13

treads of steps and landing laid on a bed of 12mm thick

cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.Soluble Salt PVT.

Tiles in All Rooms.

26 Providing and laying Vitrified tiles, 24'' x 24'' in skrting 172.70 SMT. 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3

(1-cement : 3-coarse sand) and jointed with white cement

slurry Soluble Salt PVT. Tiles in All Rooms.

27 Providing and fixing flush door both sides laminated 21.50 SMT. 3122.92

andshutter fabricated from 35 mm thick solid core

malemine faced three layered pre laminated flat pressed

wood based exterior grade bonded BWP/BWR synthetic

resin having stamped IS 12823 grade I type II including

Stainless steel decorative type designs fixtures / fastening

2Nos. Handles, 2Nos. Aldropes, towerbolt etc.including

I.T.W. triangular batten patti of size 30m.m.x30m.m.etc. as

per architectural detailed drawing and as directed by

engineer in charge..

28 Providing and fixing FRP frame size 125x65 mm and 8.20 SMT. 2615.04

35mm thick FRP shutter having extra reinforcement on

sides & edges in polish finish. The core of the shutter &

frame is to be filed up with injected polyurethene foam

done in situ alongwith embedded wooden pieces for

stiffening & also taking hinges & fintures. The whole FRP

frame & shutter is to be water proof weather proof, termite

proof & resistance to mild acid/alkali. Rates are to be

inclusive of S.S hinges with necessary screws &

alluminium S.S fixtures & fastenings & fastener sleeve.

29 Providing and fixing window having extruded aluminum 32.50 SMT. 3477.63

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track with Mosquitoe Net member size 61.85 mm x

mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of

size 61.85 mm x 31.75mm x 1.30 mm @ wt.of

Kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent

silicon sealant glass fixing to frame as per details etc

complete for window.

30 Providing and fixing standared extruded of alluminium 5.00 SMT. 2525.00

section of size 63mm x 38.10mm x 1.2mm (Wt.

Kg/mt) with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

31 Providing and fixing M.S. grill of required pattern of 2693.40 Kg. 111.61

windows etc. with M.S.. flats at required spacing and

frame alround square or round headed bolts and nuts or by

screws.including applying a priming coat of red lead paint

and two coats of oil painting

32 Applying two coats of Birla (white cement based) or 667.50 SMT. 161.46

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new wall surface to

give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth. with Wall painting (two coats)

with plastic emulsion paint of approved brand and

manufacture on undecorated wall surface to give an even

shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand

papered smooth.

33 Applying two coats of Birla (white cement based) or 229.50 SMT. 166.87

(acrylic lapy- putty) or equivalent & two coats of primer of

approved brand and manufacture on new Ceiling surface

to give an even shade including thoroughly brushing the

surface free from mortar dropping and other foreign matter

and sand papered smooth. Ceiling painting (two coats)

with plastic emulsion paint of approved brand and

manufacture on undecorated Ceiling surface to give an

even shade including throughly brushing the surface free

from mortar droppings and other foreign matter and sand

papered smooth.

34 Finishing wall with weather proof exterior emulsion paint 872.45 SMT. 160.59

on wall surface (two coats) to give an required shape even

shade after thoroughly brushing the surface to remove all

dirt, and remains of loose powdered materials.etc

complete. Priming: Apply a liberal coat of exterior acrylic

primer and allow it to dry for 4-5 hours.

35 Providing and laying integral cement based water proofing 271.95 SMT. 854.46

treatment including preparation of surface as required for

treatment of roofs, balconies, terraces etc. consisting of

following operations. (a) Applying and grouting a slurry

coat of neat cement u ',brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along

36 Providing and constructing sandwitch type Granite stone 14.50 RMT. 8290.08

top & bottom Kota Stone platform 0.6 mt. wide & 0.75 mt.

height, including front granite stone patti and top granite

skirting pati, vertical partitions of Kota stone and Edge

vertical granite stone on Both sides with cement

Mortar(1:1) as required comp as per drawings and

Instruction of Engineer incharge.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

37 Providing and fixing wash down water closet (European 5.00 No 4248.45

type, W.C. Pan) with integral P or S trap including jointing

the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-

fine sand) (Seal and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white colour,

Providing and fixing 12.5 Litres low level flushing cistern

with a pair, of C.I. or Mild brackets, complete with fittings

such as lead valve less syphon, 15mm nom.nal size brass

ball valve with polythene float, C.P brass handle unions

and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia.porcelain enamelled flush bend

including cutting holes in walls and making good the same

connecting the flush bend with cistern and closet (overflow

pipe to be measured and paid for separately)(A) Vitreous

China (I) In white colour, Providing and fixing plastic seat

and cover for wash down water closer with C.P. brass

hinges and rubber buffers. (B) Black plastic seal and cover,

With Jet spray heavy duty with S.S. Braided hose 60 cm

38 Providing and fixing washbasin with single hole for pillar 10.00 No 2463.46

tap with C.I. or M.S. brackets painted white including

sutting holes and making good the Providing and fixing

C.P. brass waste for washbasin or sink. (A)

32mmdia.,Providing and fixing pillar tap, stop tap, bottle

39 Providing and fixing PVC SWR Nahni trap IS 14735 for 20.00 No 571.08

drain - 100 mm diameter with jali of the following nominal

diameter of self cleansing design with C.I scread down or

hinged grating including the cost of cutting and making

good the walls.

40 Providing and fixing screw down bib taps of following 35.00 No 186.83

size.(A) Brass screw down bib tap polished bright. (i)

41 Providing & fixing of overhead shower 80 mm (3”) dia 5.00 No 2030.10

with 3 flow with Overhead Shower arm 200 mm with wall

flange complete (i) 15mm dia.,Providing and fixing brass

screw down stop tap.(A) 15mm dia.

42 Providing and fixing Kitchen sink with C.I. or M.S. 5.00 No 3158.53

brackets, painted white including cutting holes in walls and

making good the same (C) S.S. & Sink.(i) 600mm x

450mm x 150mm size with Providing and fixing C.P. brass

waste for washbasin or sink, piller tap, stop tap, bottle trap

43 Providing and fixing Gun metal check or non-return 10.00 No 420.63

fullway wheel valve. 25mm. dia.

44 Providing and fixing Gun metal check or non-return 10.00 No 663.43

fullway wheel valve. 40mm. dia.

45 Providing and fixing chromium plated brass half turn flush 5.00 No 263.77

cock of approved quality including fixing in pipe line etc.

complete.(ii) 25mm dia.

46 Providing and fixing ball cock of approved. quality as 5.00 No 132.89

directed.(A) Copper Metal (A) 25mm. dia.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

47 Providing laying and jointing in true line and level 15mm 30.00 RMT. 72.65

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

48 Providing laying and jointing in true line and level 25mm 60.00 RMT. 91.84

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

49 Providing laying and jointing in true line and level 50mm 100.00 RMT. 195.67

dia. U.P.V.C. Pipe ( SCH- 40) for cold water including

fittings as approved by Engineer In Charge. Pipe shall be

fixed on the wall with the help of clamp at every two metre

C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of all

materials.

50 Providing, laying and jointing in true line and level 110 60.00 RMT. 836.73

diametre U.P.V.C (Type B) conforming to IS 13592-1992

with one end plain and other end socketed with rubber

ring, & fittings conforming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 110 mm diametre

x 149 mm length x 145 mm heigh at every 2000 mm center

to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc.

including testing of pipes and joints and jointed with

adhesive solvent cement including cost of all materials.

51 Providing and fixing S.W. gully trap with C.I. grating brick 5.00 No 1246.92

masonry chamber and water tight C.I. cover with frame of

300mm x 300mm size (inside) with standard weight.(i)

Square mouth traps.(B) 150mm x 100mm size P or R type

52 Constructing Brick masonry road gully chamber 500mm x 10.00 No. 2017.19

450mm x 600mm including 500mm x 450mm C.I.

horizontal grating wih frame complete.

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

53 Constructing brick masonry chamber for underground C.I. 10.00 No 2932.93

Inspection chamber and bends with bricks having crushing

strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover

with frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to be not less

than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. )

(R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand

:4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on

walls and bed concrete etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single pipe line.

54 Providing & fixing G.I. Rain water spout of 50 mm.dia & 20.00 No. 101.91

30 cm length etc.

55 Providing and fixing in position cowel went to pipes.(C) 5.00 No. 501.87

56 Providing erecting and fixing double coated PVC. (ISI) 2500.00 Lit 3.95

water tank of required capacity each with all necessary

fittings and connection etc. complete on terrace.

57 Providing Sock pit of 5.0 Cum Volume (internal diameter 5.00 No 25286.36

of 1.50 meter) including Excavation and filling brick bats

with dry masonary work attop for 45cm height including

covering the top with R.C.C. SLab with One Man hole and

C.I. cover of 0.60 x 0.45m , including providing vatas in

Cement Motar 1:3 with the finishing curing and necessary

connection with the septic tank outlet etc complete as

directed by Engineer in charged.

58 Providing septic tank of inside dimensions( 2.5 mt. x 2.0 5.00 No 40419.19

mt.x 1.5 mt.) as Directed by incharge with brick masonary

of CM 1:6 the foundation floor with 1:5:10 B.B.C.C.

finished with 15 mm C.P. in C.M. 1:4 root cover of R.C.C.

slab inclunding connection pipe from inlet and outlet

59 Providing of Bala Work for Anganwadi like Wall 5.00 Job 30300.00

paintings on inside and outside walls upto the Slab height

or lintel height, Measurements - vertical Scale Paint, Wall

arts, Black board, Drawings of Animal, birds, Vegetables,

Nutrition chart,Days-Months, Making Yojana Logo Board

with all the deatils, writing bruilding name in paint on the

front side, etc complete as per Annexure (A) & as per

Directed by Engineer in charged.

60 Providing, erecting & Fixing Fibre Fabricted make 5.00 No 10100.00

childern Slide fit for children age group coming to

Anganwadi and approved by Engineer in charge, in the

playground of approved brand and quality at the site ad

directed by engineer in Charge

61 Providing, erecting & Fixing Fibre Fabricted make 5.00 No 11110.00

childern Swing for children age group coming to

Anganwadi and approved by Engineer in charge, in the

playground of approved brand and quality at the site ad

directed by engineer in Charge

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

62 Providing Cello/Nikamal two Seat polypropelene Plastic 25.00 Nos 3030.00

Junior Well finished Study/Play Table with Chairs for

Kids from 3-10 Years (Attractive colours like

RED/Yellow/Green) with all necessary charges and taxes

as Directed by the Engineer in charged.

63 Supplying & installing of Dry Chemical Powder type 6 10.00 Nos 2525.00

Kg. Capacity fire extinguisher as per I.S. 2171 ISI. Mark

with necessary fittings etc. complete.

64 Providing and fixing kitchen platform trolley having three 12.04 Sqm 17281.10

drawers of SS (IS 304) of required size like thali, katleri,

perforated, partition, cupsosar type in kitchen platform

having drawer front side and backside by using 19mm

thick all proof plywood of ( IS 710 ) quality all side

laminated etc. as directed. The size of SS (IS 304) basket

of size 4" to 18" for thali, dish, katleri, perforated,

partition, cupsosar type as directed including necessary

S.S. fittings, handles, nobs, telescopic channels, etc. as

65 Providing Office table with wooden top of approved brand 5.00 No 5555.00

Ply base of appropriate thickness of required dimensions

with base support made up of Waterproof Ply of approved

Brand(ISI make) on site with all necessary fittings

Fixtures like handles and adhesives,etc complete of design

directed by Engineer incharged

66 Providing Chair with armrest with leather /PVC / Mesh 10.00 Nos 4040.00

finish and proper cushion on site with all necessary fittings

, Fixtures and adhesives,etc complete of design directed

by Engineer incharged

67 Providing and fixing of Polished Kota Stone / Kadapa for 15.17 Sqm 1089.67

making Horizontal Shelves on wall using appropriate

adehsive/motar and making appropriate vertical supports

wherever necessary in brickwork or Kota Stone and and

jointed with gray cement slury mixed with pigment to

match the shade of slab and making the site cleaning as

original with all necessary material and labour charges etc

complete as per design directed by Engineer incharged

Rupees Fifteen Lakh TwentyOne Thousand Six Hundred SeventyFive Paise ThirtyTwo Only

SHEDULE B Page