REPAIR TO VARIOUS STEEL FURNITURE AND MISC ITEMS UNDER GE CLEMENT TOWN

Amount

TABLE DINING ORS:- (FD-165(M))

Removing old unserviceable top and S&F New top of 19 mm plain MDF Board Grade-I, Type-II ISI marked covered with 22 gauge aluminium sheet in one piece all as specified and shown in drawing.

Removing of unserviceable long rail/stiffner and S & F new long rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable short rail/stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable legs rail and S & F new legs of conduit pipe 25 mm 1.6 mm thick as per drawing.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing

M & L for welding to broken steel frame of Table Dining ORS as per drg complete all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table dining ORs by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

ALMIRAH LARGE STEEL WITH SHELVES :- (FD-67/104/1031)

Removing of old unserviceable handle without damaging the adjacent parts of almirah large steel and S & F new steel CP handle 125 mm long of approved quality complete all as specified and directed

Removing of unserviceable lock without damaging the adjacent parts of almirah large steel and S&F new lock of size 65 mm with duplicate keys to almirah large steel (Make : Godrej/Hetich/LINK) 6 lever complete all as directed and as shown in drg.

Removing unserviceable locking device and S&F new locking device of 10 mm dia including MS Rod and brass shackles for almirah large steel complete with fixing accessories complete all as shown in drawing and as specified and directed

Adjustment/fixing of the existing loose shelves by providing new clamps, cleats, screws etc removing unserviceable clamps all as directed (Cost of cleats, clamps, screws shall deemed to be included in quoted rate)

Taking out unserviceable hinges and S&F new hinges of reqd size as per drg.

Taking out unserviceable broken legs from Almirah large steel and S&F new legs made out of 1 mm MS sheet suitable for almirah large steel & welded accordingly complete all as directed and as shown on drg.

Taking out old unserviceable/damaged shelves of almirah large steel and S&F new shelves made out of 1mm MS sheet bent to required shape and fixing the same properly in position complete all as directed.

Taking out unserviceable shutters/Covers and S&F new shutters/covers made out of 1mm MS sheet made to required size and shape for almirah large steel as per drawing suitable for three way locking device and fixed with suitable size of MS Screws complete all as directed.

M & L for welding to broken steel frame of almirah large steel with shelves complete all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of almirah large steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coat of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed by Engr-in Charge. Cross marking with white paint(as & when required) to almirah large steel size 2" wide and 3' X 3' long. Stenciling by white paint on the right side of almirah large steel as "REMOVE ME FIRST IN CASE OF FIRE" with synthetic enamel paint in white colour and the size of letter as directed by Engineer-in-charge (Cost of paint shall deemed to be included in quoted rate)

ALMIRAH MEDIUM/SMALL STEEL WITH SHELVES : (FD-67/243/1032)

Removing of old unserviceable handle without damaging the adjacent parts of almirah medium steel and S & F new steel CP handle 125 mm long of approved quality all as specified and directed

Removing of unserviceable lock without damaging the adjacent parts of almirah medium steel and S&F new lock of size 65 mm with duplicate keys to almirah medium steel (Make : Godrej/Hetich/Link) 6 lever complete all as directed and as shown in drg.

Removing unserviceable locking device and S&F new locking device of 10 mm dia including MS Rod and brass shackles for almirah medium steel complete with fixing accessories complete all as shown in drawing and as specified and directed

Adjustment/fixing of the existing loose shelves by providing new clamps, cleats, screws etc removing unserviceable clamps all as directed (Cost of cleats, clamps, screws shall deemed to be included in quoted rate)

Taking out unserviceable hinges S&F new hinges of reqd size as per drg complete all as specified and as directed.

Taking out unserviceable broken legs from Almirah medium steel and S&F new legs made out of 1 mm MS sheet suitable for almirah medium steel & welded accordingly complete all as directed and as shown on drg.

Taking out old unserviceable/damaged shelves of almirah medium steel and S&F new shelves made out of 1mm MS sheet bent to required shape and fixing the same properly in position complete all as directed

Taking out unserviceable shutters/Covers and S&F new shutters/covers made out of 1mm MS sheet made to required size and shape for almirah medium steel as per drawing suitable for three way locking device and fixed with suitable size of MS Screws complete all as directed.

M & L for welding to broken steel frame almirah medium/small steel with shelves complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of almirah medium steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coat of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed by Engr-in Charge.Cross marking with white paint(if required) to almirah large steel size 2" wide and 3' X 3' long.Stenciling by white paint on the right side of almirah medium steel(as and when required) as "REMOVE ME FIRST IN CASE OF FIRE" with synthetic enamel paint in white colour and the size of letter as directed by Engineer-in-charge (Cost of paint shall deemed to be included in quoted rate)

LOCKER BED SIDE : (FD-257/1029)

Removing old unserviceable broken handle from locker bed side steel without damaging adjacent parts of locker bed side steel and S&F new CP handle 100 mm long of approved quality complete all as specified and directed

Removing old unserviceable haps and staple damaging the adjacent parts of locker bed side steel and S&F new haps and staple chromiun plated of suitable size complete all as specified and directed.

Taking out old unserviceable broken hinges from locker bed side steel without damaging adjacent parts of locker bed side steel and S&F new hinges of reqd size of approved quality complete all as specified and directed.

Taking out unserviceable broken legs from locker bed side steel and S&F new legs made out of 1 mm MS sheet suitable to locker bed side steel & welded accordingly complete all as specified and directed.

Taking out unserviceable shelves and S&F new shelve made out of 1mm MS sheet as per drawing including fixing of existing loose shelves by providing new cleats, clamps, screws etc. complete all as specified and directed.(Cost of cleats, clamps, screws shall deemed to be included in quoted rate)

Taking out unserviceable shutters and S&F new shutters made out of 1mm MS sheet as per drawing complete all as specified and as directed.

Taking out unserviceable conduit pipe and S&F new conduit pipe 20 mm dia of 1.6 mm thick MS CP as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of locker bed side complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of locker bed side steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coat of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE 3'x2' WITH DRAWER : (FD-1008)

Removing old u/s broken top and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging and headless nails all round the edges all as specified and directed. (Make: Green Ply /Century/Action Tesa/Novapan)

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing complete all as specified and as directed.

Removing of unserviceable short rail/stiffener and S & F new short rail/stiffener of conduit pipe 25 mm 1.6 mm thick as per drg.

Removing of unserviceable long rail/long stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg complete all as specified and as directed.

Removing the existing unserviceable locks of table 3' X 2' with drawer and S&F new lock 5 lever of suitable size with duplicate keys complete all as specified and directed. (Make : Godrej/Hetich/Link)

Removing of old broken unserviceable drawers from existing table 3' X 2' with drawer and S&F new drawers of suitable size made out of 1mm thick plain black steel sheet complete all as specified and directed

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of table 3'x2' with drawer complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table 3' X 2' with drawer steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE STEEL : (FD-1007/1016/1010/1012/1013)

Removing old u/s broken top and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and directed. (Make: Green Ply /Century/Action Tesa/Novapan)

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drg complete all as specified and as directed.

Removing of unserviceable short rail/stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg complete all as specified and as directed.

Removing of unserviceable long rail/long stiffner and S & F new short rail/stiffner of conduit pipe 25 mm 1.6 mm thick as per drg complete all as specified and as directed.

Removing of unserviceable shoe and S & F new hard rubber shoe as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of table steel complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coat of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE 3'x3' STEEL : (FD-1009)

Removing old u/s broken top and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and directed. (Make: Green Ply /Century/Action Tesa/Novapan)

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing complete all as specified and as directed.

Removing of unserviceable rail and S & F new rail of conduit pipe 25 mm 1.6 mm thick as per drg complete all as specified and as directed.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of table 3'x3' steel complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table 3' X 3' steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE OFFICE CLERK STEEL : (FD-84/1004/1006)

Removing old u/s broken top of table office clerk steel and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and directed and as per drawing. (Make: Green Ply /Century/Action Tesa/Novapan)

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing complete all as specified and as directed.

Labour only for adjustment of drawers where ever reqd as directed.

Removing unserviceable locks of drawer and S&F new lock (Make : Godrej/Hetich/ Link) 5 lever as per drg.

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of table office clerk steel complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table office clerk steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE OFFICE OFFICER STEEL : (FD-1002/1003)

Removing old u/s broken top of table office officer steel and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and directed. (Make: Green Ply /Century/Action Tesa/Novapan)

Taking out unserviceable leg and S&F new leg made out of MS conduit pipe 25 mm dia of 1.6 mm thick as per drawing complete all as specified and as directed.

Removing the existing unserviceable locks of drawer of table office officer steel and S&F new lock (Make : Godrej/Hetich/ Link) 5 lever of suitable size with duplicate keys complete all as specified and directed

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing complete all as specified and as directed.

M & L for welding to broken steel frame of table office officer steel complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table office officer steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TEAPOY VERANDAH : (FD/E6/MAP/17)

Taking out unserviceable legs and S&F new legs of existing shape and size as required duly welded to all the places as per drawing complete all as specified and as directed.

Removing old u/s broken top and S&F new Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with standerd PVC edging/wooden edging all around and headless nails all round the edges all as specified and directed

Removing of unserviceable shoe and S & F new hard rubber shoes as per drawing complete all as specified and as directed.

M & L for preparation of old steel surface of teapoy verandah and welding loose points, if any including de-rusting the surface and painting with one coat of synthetic enamelled paint (1st grade quality) complete all as specified and directed

BOOK CASE STEEL : (FD-1028/69(M))

Shelf : M&L for removing old worn out Shelf from the Book Case Steel and Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

Shutters : M&L for removing old worn out Shutters from the Book Case steel and Supply and fixing of new Shutter made out of 1 mm thick MS Sheet with 3mm plane glass . Rest all as specified on drg and as directed.

Lock: M&L for removing old worn out lock from the Book Case steel Supply and fixing of new lock (Set of four lock with one set of key)(Make : Godrej/ Hetich/ Link). Rest all as specified on drg and as directed.

Handle: M&L for removing old worn out handle from book case steel supply and fixing of new handle of best quality . Rest all as specified on drg and as directed.

M & L for welding to broken steel frame of Book Case Steel complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of book case steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

RACK STEEL (ANY TYPES) : (FD-129/106 /1038 /1039)

Shelf : M&L for removing old worn out Shelf from the Rack Steel (Any Types) and Supply and fixing of new shelf made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

Angle Iron : M&L for removing old worn out angle iron from the Rack Steel (Any Types) and Supply and fixing of new slotted angle iron of size 40x40x5mm of required length with suitable nuts and bolts specified on drg and as directed.

Side : M&L for removing old worn out sides from the Rack Steel (Any Types)and Supply and fixing of new Sides made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

Back : M&L for removing old worn out back from the Rack Steel (Any Types) and Supply and fixing of new back made out of 1 mm thick MS Sheet . Rest all as specified on drg and as directed.

M & L for welding to broken steel frame of Rack Steel (Any Type) complete all as specified and as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of rack steel by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

CHAIR REVOLVING/CHAIR EXECUTIVE : (TP & FD/E6/MAP/01)

Seat & Back : Removing the existing old unserviceable seat and back from the chair and re-upholestering with new fabric containing material like Acrylic polyester, poly viscose, poly propylene of colour as approved by GE on PU foam of 50 mm 50 density fixed over 12 mm BWR plywood all as specified on drg and as directed. (Fabric shall be as per sample kept in yard) and as approved by GE.

Twin Castor Wheel : Removing the existing unserviceable or broken castor wheel and S&F New Castor wheel to the chair in suitable pattern/model to match the original all as specified on drg and as directed.

Handle : Removing the existing broken/ unserviceable handle from the chair and S&F new handle made out of Black Integral Skin Polyurethene reinforced with MS insert scratch and weather resistant to the chair in suitable pattern/model to match the original all as specified on drg and as directed.

Bottom Base : Removing the existing unserviceable or worn out bottom base from the Chair. Supply and fix new Base to the chair in suitable pattern/model to match the original all as specified on drg and as directed.

M & L for welding to broken steel frame of Chair revolving/Chair Executive complete all as specified and as directed.

Gas lifting Hydraulic System : Removing the existing unserviceable Gas lifting Hydraulic System of various types from the Chair. Supply and fix new maintenance free, environmental friendly, chrome free cylinder tube fixed in a M.S. black powder coated with outer central column tube 38 mm dia and 2 mm thick having 100 mm storke length with gas pressure of 300 n force Gas lifting Hydraulic System to the chair in suitable pattern/model to match in original all as specified on drg and as directed.

BED HARD : (FD/E6/MAP/08(R))

Removing old u/s top and S&F new top of plywood (Make: Greenply/Century/Archidply) top 12mm thick BWR Grade ISI Marked confirming to IS-303 of Bed plywood made to shape & size as shown on drawings, complete all as specified and directed by GE. (Make: Greenply/Century/Archidply)

Removing old u/s headrest and S&F new headrest made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE complete all as directed and shown on drawing.

Removing old u/s footrest and S&F new footrest made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I of shade as approved by GE and shown on drawing including dismatling of old unserviceable top without disturbing the other parts. (Make: Green Ply /Century/Action Tesa/Novapan)

M & L for welding to broken steel frame of Bed Hard all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of bed hard by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE BED SIDE : (FD//E6/MAP/15(R))

Removing old u/s broken top of table bed side and S&F new Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side including all round PVC edging with adhesive and panel pins complete all as specified and directed. (Make: Green Ply /Century/Action Tesa/Novapan)

Removing old u/s top drawer of table bed side and S&F new Top drawer of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side and in front side with 12mm BWR grade plywood (Make: Greenply/Century/Archidply) in thrree sides including provision of telescopic channel of suitable size of approved quality, and 6mm BWR plywood (Make: Greenply/Century/Archidply) as bottom along with Chromium Plated handles(Approved by GE) all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s bottom drawer of table bed side and S&F new bottom drawer made of suitable size 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side in front side with 12mm BWR grade plywood (Make: Greenply/Century/Archidply) in three sides including provision of telescopic channel of suitable size of approved quality and 6mm BWR plywood (Make: Greenply/Century/Archidply) as bottom along with Chromium Plated handles (Approved by GE) all as specified and directed by GE. Plywood shall be of BWR Grade ISI Marked confirming to IS-303.

Removing old u/s side of table bed side and S&F new Side of suitable size made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan)) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing white lamination on other side complete all as specified and directed

M & L for welding to broken steel frame of Table Bed side all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table bed side by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

CHARPOY WITH HARD TOP : (FD-/MAP/II/01)

Removing old u/s top and S&F plywood (Make: Greenply/Century/Archidply) top of size 1930X900MM, 12mm thick BWR Grade ISI Marked confirming to IS-303 of Charpoy with Hard top made to shape & size as shown on drawings & complete all as specified and directed by GE. 12/6mm thick half round teak wood beading shall be provide alround the edges of plywood with suitable adhesive and headless nails.

M & L for welding to broken steel frame of Charpoy with Hard Top all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of charpoy IP Hard top by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

TABLE COMPUTER : (FD/E6/MAP/03)

Removing old u/s broken top and S&F new table Top of suitable size shall be made of 18/19 mm thick Prelaminated MDF Board exterior grade (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I one side with approved shade and balancing with lamination on other side with 4 mm half round teak wood beading with fevicol duly polish with a coat of high glossy french polish complete and headless nails all round the edges all as specified and directed.

Removing old u/s Shelves/bottom and S&F new shelves/bottom made of 18/19 mm thick prelaminated MDF Board (Make: Green Ply /Century/Action Tesa/Novapan) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE along with telescopic channel as directed.

Removing old u/s side/partion and S&F new Side/partion made of 18/19 mm thick prelaminated MDF Board (Make : Greenlam/Century/Action Tesa) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE.

M & L for welding to broken steel frame of Table computer all as directed.

Removing old u/s shoe and S&F new PVC adjustable shoe superior quality as approved by GE shall be provided.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of table computer by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

DESK FOR SENIOR STANDARD 2 SEATER : (FD-166(M))

Removing old unserviceable top and S & F new top made out of plywood (Make: Greenply/Century/Archidplyy) 18/19 mm thick BWR Grade ISI Marked confirming to IS-303 all as directed and shown in drg.

Removing old unserviceable bottom and S & F new bottom made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable sides and S & F new sides made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing old unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

M & L for welding to broken steel frame of Desk for Senior Standard 2 Seater complete all as specified and directed.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M&L for spray painting of repaired Desk for senior standard 2 seater completer on all surface applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete removal of existing paint complete and removing of dust dirt etc from wooden/iron surface including denting as as required on iron surface all as specified and shown on drg and directed.

DESK FOR SECOND STANDARD 2 SEATER : (FD-167(M))

Removing old unserviceable top and S & F new top made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing old unserviceable bottom and S & F new bottom made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable sides and S & F new sides made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

Removing unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 18/19 mm thick BWR grade ISI marked confirming to IS-303 all as specified and shown in drg.

M & L for welding to broken steel frame of Desk for Second Standard 2 Seater all as directed.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M&L for spray painting of repaired Desk for second standard 2 seater complete on all surfaces applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete, removal of existing paint complete, and removing of dust, dirt etc from wooden/iron surface including denting as required on iron surface all as specified and shown on drg and directed.

CHAIR FOR SENIOR/MIDDLE STANDARD : (FD-169(M))

Removing unserviceable seat and S & F new seat made out of plywood (Make: Greenply/Century/Archidply) 12 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable back and S & F new back made out of plywood (Make: Greenply/Century/Archidply) 12 mm thick BWR grade ISI marked confirming to IS-303 with 4mm dia 50mm long semi circular nut and bolts with washers drilling holes including seat and conduit frame all as directed and shown in drg.

Removing unserviceable shoes and S & F new rubber shoe best quality all as directed.

M & L for welding to broken steel frame of Chair for Senior/Middle Standard all as directed.

M&L for spray painting of repaired Chair for senior/middle standard 2 seater complete on all surfaces by applying one coats of synthetic enamel paint (Colour Shade as approved by GE) over a coat of red oxide primer on iron surface and white primer on wooden surfaces complete after preparation of surface by scraping complete, removal of existing paint complete, and removing of dust, dirt etc from wooden/iron surface including denting as required on iron surface all as specified and shown on drg and directed.

CHAIR SCHOOL WITH HAND BOARD : (FD/E6/MAP/05)

Removing old unserviceable seat/back of Chair and S&F one piece PVC Seat and back virgin quality as approved by GE all as specified and shown on drg.

Removing old unserviceable hand board of Chair and S&F new hand board top openable fixed on right hand side made of 18/19 mm thick Prelaminated MDF Board exterior grade (make: Greenply/century/action tesa/Novapan) ISI marked confirming to IS-14587 Grade-I of shade as approved by GE with standard PVC edging/wooden edging as specified and shown on drg.

M & L for welding to broken steel frame of Chair School with Hand Board all as directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of chair school with hand board by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

CHAIR VARANDAH : (FD/MAP-II/06)

M & L for Welding to broken steel frame of chair varandah by welding complete all as directed

S&F 4 mm thick PVC sheet for seat (Make:- Classic,Amko,cello) of Chair Verandah complete all as shown on drawing and as directed.

S&F 4 mm thick PVC sheet for back (Make:- Classic,Amko,cello) of Chair Verandah complete all as shown on drawing and as directed.

Taking down old unserviceable shoes and S & F rubber/PVC shoes to to leg of chair varandah complete all as specified and directed.

M&L for preparation of old painted iron & steel surfaces (Externally and internally including shelves etc) of chair verandah by scraping & rubbing down with sand paper, removing dents & scratches, if any filling the same with paste fillet and spray painting one coats of synthetic enamel paint(1st grade quality) (Colour shade as approved by GE other than exisiting colour) over a coat of red oxide primer complete after preparation of surface all as specified and directed.

NOTE : (Applicable for all items):- (i) The bidders/contractors are advised to read relevant Contract drawings and Particular specifications, Key specifications, Special conditions and General conditions of Contracts before entry/quoting the rates. (ii) The items are to be manufactured as per relevant drawings and specifications and supplied to the Department.

M/SDoon furnishers

Avtarsinghchaddhaandcompany