A A to LN Hospital New Delhi dg 2021 22 (SH Providing and placing frniture for Pay and Account Office 3rd Floor MRD block at Lok Nayak Hospital New Delhi) (Modified)

Amount

Providing & Placing Executive Table of size 84"x 36"x 2'6" (wxdxh).Table top thickness 50 mm made of wood veneer finish on MDF board in two tones duly polished with melamine finish having pencil tray in the centre of main table and cable manager on top. base made of 25 mm thick veneer finish with 3 drawer wooden pedestal on one side and cupboard pedestal on other side having all drawers on telescopic channels. The front tie is made in wood veneer finish, complete table is duly polished with deseired shade. complete as per the direction of engineer in-charge.

Providing & Placing Executive High Back Revolving Chair with dual layered leatherite upholstered foam at seat and back for comfortable seating . The height of back from seat shall be 28” for high back chair . The arm rest shall be fully cushioned for strength and aesthetics, the chair shall have pneumatic height adjusted tilting and revolving mechanism with five pronged steel reinforced base with twin wheel castors for smooth and easy movement. complete as per the direction of engineer in-charge.

Providing and placing Ergonomically designed visitor chair with special contour on the back rest for human body with lumbar support which protects the spine and leaves the shoulder free for easy movement. Base of the chair made of ERW MS Round Pipe of 25 mm dia & frame not less than 14 gauge duly powder coated up to 40-45 microns. Seat and back made of 15 mm hot pressed ply. “U” foam is provided on seat & back. “U” foam of density not less than 40 kg/m3. Armrest is made of one piece well rounded polypropylene.

Providing and Placing designer sofa fully upholstered Frame made of good quality wood duly anti-termite treated, Seat made of good quality flat steel spring used in seat frame duly covered with coir, jute cloth and markeen fixed with 4” thick ISI mark high density ‘U’ foam. Back & Arm Rest made of flat steel spring, covered with coir, jute cloth and markeen fixed with 2” thick ISI mark high density ‘U’ foam for giving shape in back and arm rest.

3 Seater

2 Seater

Providing & Placing Wooden Centre table 1200 x 600 x 450 mm (wxdxh). Frame made of teak wood duly polished. Top made of 19mm commercial board & 4mm teak ply pasted on top duly polished of desire shade. Shelf provided at the bottom duly polished with melamine finish.

Providing & Placing Wooden Almirah partially glazed and partially open of size 1800 x 420 x 1800 (WXDXH) made of melamine coated prelaminated chip board. Aluminum beading is provided at the border supporting 5mm clear glass for glass shutters with necessary hardware fixture. The bottom part is made of melamine coated prelaminated chip board having one adjustable shelf.

Providing and Fixing Modular workstation of size 1200 x 600 x 25mm (wxdxh) .Worktop made of 25mm thick prelaminted particle board duly banded. having 60 - 70 mm thick tile based 1220 mm high partition duly powder coated trim on top. the all open edges are sealed with 2 mm thick PVC tape pasted at 200'C with hot melt glue, complete including all necessary fittings & fixtures. each partition panel having fabric & White marker board, with two levels raceways, one at skirting and one above / below the worktop. It is also having Keyboard tray, CPU Trolley & mobile drawer unit.

Providing and Placing Medium Back computer operator revolving chair, back of overall height 41" overall depth of seat 19" and overall width 19" seat & back made of 15 mm molded ply with high density foam in seat and back with 5 pronged PP base with central tilt mechanism with pneumatic height adjustment gas lift mechanism.

Providing & Placing Modular table of size: 1500 x 750 x750 mm (wxdxh) having top made of 25mm thick prelaminted particle board duly edge banded. Base made in 18mm thick prelaminated particle duly edge banded. It is having a provision of Fixed 3 drawer unit in right hand side, keyboard tray in middle & one openable shutter at anothe side.

Providing & Placing Executive Medium Back Revolving Chair with dual layered leatherite upholstered foam at seat and back for comfortable seating . The height of back from seat shall be 22” for medium back chair .The chair shall have 5 pronged base with twin castors nylon wheel with pneumatic height adjustment