Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.9 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹30 L+₹3.0 L (11.0%)Rejected-Finance | L2 | Rejected-Finance Not L1 | |
| 3 | L3₹31.4 L+₹4.4 L (16.2%)Rejected-Finance HOUSE NO 01 B JANANA DODI OPP AKSHAY HOTEL RAI KA BAGH JODHPUR RAJASTHAN 342010 | 342010 | L3 | Rejected-Finance Not L1 | |
| 4 | L4₹33.4 L+₹6.3 L (23.5%)Rejected-Finance | L4 | Rejected-Finance Not L1 |
| Sl No | Description | Qty | Unit | LOKESH ELECTRICAL WORKS CONTRACTOR L2 | KAVYA ENTERPRISES L1 | Nvimal Engineers and Contractor L3 | M/S SUMAN ENTERPRISES L4 |
|---|---|---|---|---|---|---|---|
| 1.00 | Servising of Diesel Engine Generating sets 15 to 50 KVA Rating to be carried out as per schedule given as under. B- check:- (Every 100 Hrs or 6 months whichever is earlier) (i) Fluid levels - Check and top off coolant, oil, and fuel levels as needed. (ii) Oil and Filter change - Change the engine oil, oil filter, fuel filter and bypass filter. (iii) Air filter replacement - replace the Air filter. (iv) Replace the water separator (v) Radiator cleaning - Clean the radiator with chemical cleaner (vi) Leakage inspection - Check for any leaks in the fuel, coolant, or oil system and make necessary repairs (vii) Battery inspection - inspect the battery including terminals, for corrosion and ensure proper voltage (viii) General Inspection - Visually inspect the generator for any damage, loose parts, or signs of wear, loose wire connection in terminal boxes. (ix) V- Belt condition - Check the condition of belts (x) Exhaust system - Inspect the exhaust system for leaks and ensure proper operation (xi) Electrical system - Check the electrical system for any issues or loose connections and make necessary repairs (xii) Fire Extinguisher - Ensure the fieextinguisher is present, charged and in good working condition complete all as specified and directed.
Note:- (a) Necessary minor repair works, control wiring & materials shall be inclusive in the quoted rates.
(b) Relavant spares which are replaced in repairs works shall be measured and paid as supply only). | 12 | Each Job | 1,000 ₹12,000 Lowest | 3,500 ₹42,000 | 1,800 ₹21,600 | 2,000 ₹24,000 |
| 2.00 | All as per item no. 01 above, but 62.5 kVA to 100 kVA. | 25 | Each Job | 1,300 ₹32,500 Lowest | 4,500 ₹1,12,500 | 1,800 ₹45,000 | 2,000 ₹50,000 |
| 3.00 | All as per item no. 01 above, but above 100 kVA and upto 160 kVA. | 14 | Each Job | 1,400 ₹19,600 Lowest | 5,500 ₹77,000 | 2,000 ₹28,000 | 2,100 ₹29,400 |
| 4.00 | All as per item no. 01 above, but above 160 kVA and upto 250 kVA. | 5 | Each Job | 1,500 ₹7,500 Lowest | 6,500 ₹32,500 | 2,500 ₹12,500 | 2,600 ₹13,000 |
| 5.00 | All as per item no. 01 above, but above 250 kVA and upto 400 kVA. | 4 | Each Job | 2,100 ₹8,400 Lowest | 7,500 ₹30,000 | 3,000 ₹12,000 | 3,200 ₹12,800 |
| 6.00 | Servising of Diesel Engine Generating sets 15 to 50 KVA rating to be carried out as per schedule given as under. C- Check:- (Every 1500 Hrs or 1 year whichever is earlier) (i) Pollution level - Monitor exhaust emissions and ensure they meet envirnomental standards. (ii) Oil and Filters - Change enginer oil, oil filters, fuel filters, and bypass filters to maintain engine health and performance. (iii) Air filter - Replaace the air filter to ensure proper airflow and prevent damage to the engine (iv) Water separator - Change the water separator (v) Cooling system - Clean the radiator and check the coolant level to ensure proper cooling and prevent over heating (vi) Gaskets check - Inspect and potentially replace gaskets in various chambers to prevent leaks and ensure proper sealing (vii) Load testing - cary over the load bank tests as require and submitt the test report kept on record complete all as specified and directed. Note:- (a) Necessary minor repair works, control wiring and materials shall be inclusive in the quoted rates (b) Relavant spares which are replaced in repairs works shall be measured and paid as supply only). | 4 | Each Job | 4,600 ₹18,400 | 2,500 ₹10,000 Lowest | 3,000 ₹12,000 | 2,900 ₹11,600 |
| 7.00 | All as per item no. 06 above but 62.5 kVA to 100 kVA. | 10 | Each Job | 5,100 ₹51,000 | 3,500 ₹35,000 Lowest | 3,500 ₹35,000 Lowest | 3,600 ₹36,000 |
| 8.00 | All as per item no. 06 above, but above 100 kVA and upto 160 kVA. | 8 | Each Job | 6,000 ₹48,000 | 4,500 ₹36,000 Lowest | 4,500 ₹36,000 Lowest | 4,600 ₹36,800 |
| 9.00 | All as per item no. 06 above, but above 160 kVA and upto 250 kVA. | 3 | Each Job | 7,000 ₹21,000 | 5,500 ₹16,500 Lowest | 5,500 ₹16,500 Lowest | 5,600 ₹16,800 |
| 10.00 | All as per item no. 06 above, but above 250 kVA and upto 400 kVA. | 1 | Each Job | 9,500 ₹9,500 | 6,500 ₹6,500 Lowest | 7,000 ₹7,000 | 6,900 ₹6,900 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
2 Jul 2025, 6:00 pmClosed
GE AF JODHPUR
GE (AF) Jodhpur
REPAIR MAINT CALIBRATION OF DG SETS AMF PANELS INSTALLED IN TECH AREA AND SU SITE AT AF STN JODHPUR
2025_MES_712816_1
8422/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF JODHPUR
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE AF JODHPUR
₹70,000
Yes
14 Aug 2025
6 Jun 2025
4 Jul 2025
6 Jun 2025
2 Jul 2025
20 Jun 2025
Amount
Servising of Diesel Engine Generating sets 15 to 50 KVA Rating to be carried out as per schedule given as under. B- check:- (Every 100 Hrs or 6 months whichever is earlier) (i) Fluid levels - Check and top off coolant, oil, and fuel levels as needed. (ii) Oil and Filter change - Change the engine oil, oil filter, fuel filter and bypass filter. (iii) Air filter replacement - replace the Air filter. (iv) Replace the water separator (v) Radiator cleaning - Clean the radiator with chemical cleaner (vi) Leakage inspection - Check for any leaks in the fuel, coolant, or oil system and make necessary repairs (vii) Battery inspection - inspect the battery including terminals, for corrosion and ensure proper voltage (viii) General Inspection - Visually inspect the generator for any damage, loose parts, or signs of wear, loose wire connection in terminal boxes. (ix) V- Belt condition - Check the condition of belts (x) Exhaust system - Inspect the exhaust system for leaks and ensure proper operation (xi) Electrical system - Check the electrical system for any issues or loose connections and make necessary repairs (xii) Fire Extinguisher - Ensure the fieextinguisher is present, charged and in good working condition complete all as specified and directed. Note:- (a) Necessary minor repair works, control wiring & materials shall be inclusive in the quoted rates. (b) Relavant spares which are replaced in repairs works shall be measured and paid as supply only).
All as per item no. 01 above, but 62.5 kVA to 100 kVA.
All as per item no. 01 above, but above 100 kVA and upto 160 kVA.
All as per item no. 01 above, but above 160 kVA and upto 250 kVA.
All as per item no. 01 above, but above 250 kVA and upto 400 kVA.
Servising of Diesel Engine Generating sets 15 to 50 KVA rating to be carried out as per schedule given as under. C- Check:- (Every 1500 Hrs or 1 year whichever is earlier) (i) Pollution level - Monitor exhaust emissions and ensure they meet envirnomental standards. (ii) Oil and Filters - Change enginer oil, oil filters, fuel filters, and bypass filters to maintain engine health and performance. (iii) Air filter - Replaace the air filter to ensure proper airflow and prevent damage to the engine (iv) Water separator - Change the water separator (v) Cooling system - Clean the radiator and check the coolant level to ensure proper cooling and prevent over heating (vi) Gaskets check - Inspect and potentially replace gaskets in various chambers to prevent leaks and ensure proper sealing (vii) Load testing - cary over the load bank tests as require and submitt the test report kept on record complete all as specified and directed. Note:- (a) Necessary minor repair works, control wiring and materials shall be inclusive in the quoted rates (b) Relavant spares which are replaced in repairs works shall be measured and paid as supply only).
All as per item no. 06 above but 62.5 kVA to 100 kVA.
All as per item no. 06 above, but above 100 kVA and upto 160 kVA.
All as per item no. 06 above, but above 160 kVA and upto 250 kVA.
All as per item no. 06 above, but above 250 kVA and upto 400 kVA.
Servising of Diesel Engine Generating sets 15 to 50 KVA rating to be carried out as per schedule given as under. D- Check:- (perfomed on yearly basis or after running hours of 3000-5000 Hrs) (i) Complete DG Set should be dismantle. (ii) Turbo charger service/ replace. (iii) Injector pin service. (iv) Cylinder head service. (v) PT pump service. (vi) Change oil. (vii) Change oil filter, fuel filter and bypass filter. (viii) Change water separator. (ix) Radiator cleaning with chemical. (x) Complete DG Set engine should be dismantle of any number of cylinders by dismantling/ strip opening of the DG set for overhauling by removing the cylinder head assembly including facing and grinding, piston connecting rod, cylinder liner, oil sump and injector including replacement of worn out spare i.e. cylinder liner with 'O' ring, piston assembly, connecting rod, large end bearing pair, valve seat, valve guide, FIP element, lubricant oil pump, gasket for cylinder, set of O rings, set of hose pipes, fuel pipes nozzle calibration, FIP calibration, water pump assy etc, ball bearing, nozzle and plunger for injector, bearing connecting rod, bearing main pair set (large end) standard, repair kit for water pump & other requirement accessories and reassembling the complete engine complete all as directed and specified. Note:- (a) Necessary minor repair works, control wiring & materials shall be inclusive in the quoted rates. (b) Relavant spares incluvise in the quoted rates.
All as per item no. 11 above but 62.5 kVA to 100 kVA.
All as per item no. 11 above, but above 100 kVA and upto 160 kVA.
All as per item no. 11 above, but above 160 kVA and upto 250 kVA.
All as per item no. 11 above, but above 250 kVA and upto 400 kVA.
Dismantling the complete radiator carefully from DG Sets cleaning/ scraping of depositing manualy from outside of the radiator, cleaning radiator fins with descaling solution from inside & outside with forged feed method & with water and aircompressor (by using separate chemical pump water pump & compressor) plugging of all leakage in welding, brazing of copper tubes, cleaning of fins and replacement of gaskets, requirement accessories complete for the DG Set capcities 15 kVA to 50 kVA complete all as specified and directed.
All as per item no. 16 above, but 62.5 kVA to 100 kVA.
All as per item no. 16 above, but above 100 kVA and upto 160 kVA.
All as per item no. 16 above, but above 160 kVA and upto 250 kVA.
All as per item no. 16 above, but above 250 kVA and upto 400 kVA.
Supply only byepass lubricant oil filters cartridge elements with 'O' ring for 15 kVA to 50 kVA DG set complete all as specified and directed. Make:- Kirlosker/ cummins/ fleetguard or equivalent approved by GE.
All as per item no. 21 above, but 62.5 kVA to 100 kVA.
All as per item no. 21 above, but above 100 kVA and upto 160 kVA.
All as per item no. 21 above, but above 160 kVA and upto 250 kVA.
All as per item no. 21 above, but above 250 kVA and upto 400 kVA.
Supply only new air filters cartridge elements with 'O' ring for 15 kVA to 50 kVA DG set complete all as specified and directed. Make:- Kirlosker/ cummins/ fleetguard or equivalent approved by GE.
All as per item no. 26 above, but 62.5 kVA to 100 kVA.
All as per item no. 26 above, but above 100 kVA and upto 160 kVA.
All as per item no. 26 above, but above 160 kVA and upto 250 kVA.
All as per item no. 26 above, but above 250 kVA and upto 400 kVA.
Supply only fuel oil filter cartridge elements with 'O' ring for 15 kVA to 50 kVA DG set complete all as specified and directed. Make:- Kirlosker/ cummins/ fleetguard or equivalent approved by GE.
All as per item no. 31 above, but 62.5 kVA to 100 kVA.
All as per item no. 31 above, but above 100 kVA and upto 160 kVA.
All as per item no. 31 above, but above 160 kVA and upto 250 kVA.
All as per item no. 31 above, but above 250 kVA and upto 400 kVA.
Supply only lubricant oil filter cartridge elements with 'O' ring for 15 kVA to 50 kVA DG set complete all as specified and directed. Make:- Kirlosker/ cummins/ fleetguard or equivalent approved by GE.
All as per item no. 36 above, but 62.5 kVA to 100 kVA.
All as per item no. 36 above, but above 100 kVA and upto 160 kVA.
All as per item no. 36 above, but above 160 kVA and upto 250 kVA.
All as per item no. 36 above, but above 250 kVA and upto 400 kVA.
Supply only fuel water separator filters cartridge elements with 'O' ring for 15 kVA to 50 kVA DG set complete all as specified and directed. Make:- Kirlosker/ cummins/ fleetguard or equivalent approved by GE.
All as per item no. 41 above, but 62.5 kVA to 100 kVA.
All as per item no. 41 above, but above 100 kVA and upto 160 kVA.
All as per item no. 41 above, but above 160 kVA and upto 250 kVA.
All as per item no. 41 above, but above 250 kVA and upto 400 kVA.
Cleaining, over hauling and dismantling the sump cover cleaning complete, removing sludge, dust etc and re-fixing, including replacement of sump gasket, nut & bolts and other required accessories for 15 kVA to 50 kVA DG Set complete all as specified and directed. Note:- Toping up Engine oil should be measured and paid separately.
All as per item no. 46 above, but 62.5 kVA to 100 kVA.
All as per item no. 46 above, but above 100 kVA and upto 160 kVA.
All as per item no. 46 above, but above 160 kVA and upto 250 kVA.
All as per item no. 46 above, but above 250 kVA and upto 400 kVA.
Supply only engine oil 15 W 40 grade in DG Set complete all as specified and as directed.
Supply only coolant of DG Set complete all as specified and as directed.
Supply only V-Belt of make Fenner or equivalent as approved by GE complete all as per site requirement.
Supply only of oil pressure gauge, ISI marked complete all as specified and directed.
Supply only of oil temparature gauge, ISI marked complete all as specified and directed.
Supply only of fuel gaugemeter, ISI marked, operated on 24 V DC complete all as specified and directed.
Supply only of high temparature diesel hose pipe of 1000 PSI of size 12.5mm dia for connecting from diesel tank outlet to engine, ISI marked complete with banjo bolt & washer complete all as specified and directed.
Supply only of high temparature diesel hose pipe of 1250 PSI of size 10.3mm dia for connecting from diesel tank outlet to engine, ISI marked complete with banjo bolt & washer complete all as specified and directed.
Supply only of distilled water for battery complete all as specified and directed.
M&L for dismantling of exhaust assembly from DG Sets of capacity 62.5 kVA to 125 kVA, supply and fixed in repair/ replacement of CPCB approved Retrofit Emission Control Device (RECD) mechanism installed at exhaust port side to reduce harmfull emissions from the DG Sets with Display ONLINE data logging/ LCD display, fully automatic, stainless steel material complete including gaskets, nut & bolts and other requirement accessories complete all as specified and directed.
All as per item no. 60 above, but 125 kVA to 250 kVA DG Set.
All as per item no. 60 above, but above 250 kVA and upto 400 kVA DG Set.
M&L for dismantling of exhaust pipe of silencer, cleaning of silencer to remove carbon deposit inside exhaust and refixing including replacement of worn out rubber gasket packing and nut, bolts complete all as specified and directed.
Taking out unserviceable old insulating material from the exhaust pipe, cleaning the exhaust pipe and supply and wraping new Thermal insulation along with aluminium cladding of any size of exhaust pipe with neat & clean finishing including replacment of gasket and tightening of all nut and bolts complete all as directed by the Engr-in-Charge.
Dismantling of defective alternator/ dynamo from engine supplying and fixing new alternator 24 volts DC Make:- TVC Lucas or equivalent as approved by GE including replacement of worn out nuts, bolts mounting clamp etc. complete all as specified and direceted.
Dismantling of self starter 24 volt DC by disconnecting battery connection taking out to civil workshop for carrying out following repair works and refixing including testing complete:- (i) Rewinding of armature & field coil (ii) Replacement of carbon brush and solenoid switch (iii) Replacement gear assembly complete all as specified and directed.
Dismantling of self starter 12 volt DC by disconnecting battery connection taking out to civil workshop for carrying out following repair works and refixing including testing complete:- (i) Rewinding of armature & field coil (ii) Replacement of carbon brush and solenoid switch (iii) Replacement gear assembly complete all as specified and directed.
Taking down u/s battery 12 V, 180 AH from the DG Set and supply and install 12 V 180 AH maintenance free battery including terminal clamps, copper lead of suitable size/ length, battery stand complete testing and commissioning all as directed by Engr-in-Charge. Make : Exide/ Tata green/ Amar raja.
M&L for surface finish powder coating for acoustic enclosure of DG Sets of any capacity and make with flame resistant powder coating protection level up to IP 65, one number of 6 KG ABC type fire extinguisher placed outside DG, tightening earthing strips of DG Sets, replacing suitable acoustic insulation material for sound proofing the DG Set with existing colour code, Stenciling name of DG & capacity where as specified and including general cleaning of DG inside & out side area complete all as specified and directed.
Taking out diesel tank of any capacity carefully including disconnection from system, descaling the diesel tank with water pressure and removing the complete deposited, drying the tank and painting two coat with super enmelled paint out side the tank size, replacement of gate valve and fixing the tank in original location and connection with existing diesel line with replacement GI/ MS fittiing replacement of diesel indicator glass/ PVC tube with necessary fitting,repair to any leakage,cleaning and testing of fuel line upto FIP inlet including making of locking arrangements complete up to 600 Ltrs capacity complete all as specified and directed.
S&F in replacment of compact type battery charger unit suitable for charging battery 24 Volt 180 AH with 2 metre copper leads - 02 nos & brass clamps complete all as specified and directed. Make:- SU-KAM/ AMCO/ AMAR RAJA.
S&F in replacment of compact type battery charger unit suitable for charging battery 12 Volt, 180 AH with 2 metre copper leads - 02 nos & brass clamps complete all as specified and directed. Make:- SU-KAM/ AMCO/ AMAR RAJA.
M&L for replacement of battery lead set two suitable for 180 AH capacity 1.5 mtr long including GM terminals one end coper lug and other and including 0.5 mtr connecting both end with gun metal terminals complete all as specified and directed.
M&L for re-conditioning 12/24 Volts, of capacity up to 180 AH batteres complete including replacement of vent caps, terminal posts, cell connectors, separtors, lead plate and electrolyte complete, charging of battery and Improve specific gravity upto 1280 and 2 volts of each cell including transportation of battery from site to civil work shop & back complete all as specified and directed.
M&L in repair for earthing complete with GI earth plate electrode 60cmx60cmx6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to and including GI earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion and excavation and earth work in any type of soil, PCC 1:3:6 type C1 in chamber, precast RCC cover 50mm thick in cement concrete 1:2:4 type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4 Kg/Sqm) with cast iron frame, funnel with wire mesh, 20mm bore GI pipe medium grade watering pipe, lugs, 40mm bore GI pipe medium grade protection pipe upto 7.5m complete all as specified and directed.
Repair/ maintenance of Automatic Mains Failure Panel (AMF) including repair of main control board & control wiring with sutable copper cables & thimbles, Auto control switches (such as Auto manual mode, single phase mode, DG/ EB by pass mode), repair of contactor kits as existing, repair of busbars & insulators with colour code, replacing of digital display system, fuses & timers, relay system complete for DG Set 15 kVA to 50 kVA and after repair of AMF panel and necessary testing shall be carried out as specified and directed. Note:- (i) Quoted rates are inclusive for all requirement accessories which are necessary repair of AMF panel. (ii) MCCB, MCX contactors, mechanical change overs are measured and paid separately.
All as per item no. 76 above, but 62.5 kVA to 100 kVA.
All as per item no. 76 above, but above 100 kVA and upto 160 kVA.
All as per item no. 76 above, but above 160 kVA and upto 250 kVA.
All as per item no. 76 above, but above 250 kVA and upto 400 kVA.
S&F in repair AVR for DG set having capacity upto 63 KVA complete all as specified and directed. Make:- National/ Kirloskar/ Cummins/ CG.
S&F in repair AVR for DG set having capacity upto 63 KVA to 125KVA complete all as specified and directed. Make:- National/ Kirloskar/ Cummins/ CG.
S&F in repair AVR for DG set having capacity upto 125 KVA to 200 KVA complete all as specified and directed. Make:- National/ Kirloskar/ Cummins/ CG.
S&F in repair AVR for DG set having capacity upto 250 KVA to 400 KVA complete all as specified and directed. Make:- National/ Kirloskar/ Cummins/ CG.
S&F in repair 12 V, 150 AH maintenance free battery including terminal clamps, copper lead of suitable size/ length, battery stand complete testing and commissioning all as directed by Engr-in-Charge. Make:- Exide/ Tata green/ Amar raja.
S&F in repair 12 V, 100 AH maintenance free battery including terminal clamps, copper lead of suitable size/ length, battery stand complete testing and commissioning all as directed by Engr-in-Charge. Make:- Exide/ Tata green/ Amar raja.
S&F in repair MCCB 400 Amp, 36 KA, 4 pole, 415 V Adjustable type including spreader links complete all as specified and directed.
S&F in repair MCCB 250 Amp, 36 KA, 4 pole, 415 V Adjustable type including spreader links complete all as specified and directed.
S&F in repair MCCB 200 Amp, 36 KA, 4 pole, 415 V Adjustable type including spreader links complete all as specified and directed.
S&F in repair MCCB 160 Amp, 36 KA, 4 pole, 415 V Adjustable type including spreader links complete all as specified and directed.
S&F in repair MCCB 125 Amp, 36 KA, 3 pole, 415 V fixed type including spreader links complete all as specified and directed.
S&F in repair four pole contactor of capacity 100 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repair four pole contactor of capacity 200 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repair four pole contactor of capacity 160 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repair four pole contactor of capacity 250 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repair four pole contactor of capacity 300 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repairs four pole contactor of capacity 400 Amps, 240 Volt AC, 2 NO+NC complete all as specified and directed.
S&F in repair four pole contactor coil of capacity 100 Amps, 240 Volt AC complete all as specified and directed.
S&F in repairs four pole contactor coil of capacity 200 Amps, 240 Volt AC complete all as specified and directed.
S&F in repair four pole contactor coil of capacity 160 Amps, 240 Volt AC complete all as specified and directed.
S&F in repairs four pole contactor coil of capacity 400 Amps, 240 Volt AC complete all as specified and directed.
S&F in repairs four pole contactor coil of capacity 250 Amps, 240 Volt AC complete all as specified and directed.
S&F in replacement water pump assembly complete all as specified and directed.
S&F in replacement lubrication oil pump assembly complete all as specified and directed.
Taking out FIP from DG Set of capaicity 15 to 50 KVA transportation to authorised service centre for repair/ maintenance and refixing to DG Set including replacement of necessary spare parts such as plunzers , governer kit with pin, nozzels, head ball guide kit, head sheet, rock rod, rollar bearing, oill seal, pistion & ring pin, joint kit and sleeves complete all as specified and directed.
All as per item no. 105 above, but 62.5 kVA to 100 kVA.
All as per item no. 105 above, but above 100 kVA and upto 160 kVA.
All as per item no. 105 above, but above 160 kVA and upto 250 kVA.
All as per item no. 105 above, but above 250 kVA and upto 400 kVA.
LOKESH ELECTRICAL WORKS CONTRACTOR (BID ID -3336649)
Nvimal Engineers and Contractor (BID ID -3332253)
M/S SUMAN ENTERPRISES (BID ID -3337567)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .