AC / RKK / 29 /19-20 / 18

Various items of laboratory furniture of reputed make & brands are required for furnishing the newly established Testing & Training Center for Food & Water Quality in BCKV, Mohanpur, Nadia as per the following specifications. Warranty: At least 2 years onsite warranty should also be assured along with the offer.

Director Table Specification Medium density fibre board with high gloss melamine top of 25 mm thick with curved design on edges and making a thickness of top 80 mm; Free Standing Return Desk Table Top: 36 mm. MDF Modesty Panel: standing on two post designed in leatherite paste horizontally and middle part of base grooved within panel to make box design from front; 30 mm MDF right and left pad movable; Side Return Desk Table Top: 25 mm MDF; Pedestal Top Panel: 25 mm MDF; All Other Panels: 18 mm MDF, Lock: Provided Castors Provided; Handle: Metal, Credenza Top Panel: 25 mm MDF, Door Panels: 18 mm MDF; All other Panels: 18 mm MDF, all made of MDF conforming IS: 303-1989 chemically treated for termite and borer resistant bonded with melamine fortified urea formaldehyde synthetic adhesive/ phenol formaldehyde synthetic resin of 25 mm thickness on top & rest 18 mm thickness with 1 mm approved colour laminate (confirming to IS:2046-95 & EN 438) of all visible surfaces; all exposed edges are to be sealed with PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine, with full size 6 mm thick amber colour glass fitting with edge polishing; Size: L:W:H - 2000 X 1000 X 760 mm .

Director Chair Specification The seat and back are made up of 1.2 ± 0.1 cm thick hot pressed plywood, uphostered with leatherite and moulded Polyurethane foam. The back foam is to be designed with contoured lumber support for extra comfort. High Resilience (HR) Polyurethane foam is to be moulded. The armrest should be made of MS chromium plated and covered with leatherite padding. The armrests are to be fitted to the seat. Permanent contact mechanism with following features: 360 degree revolving; 17±2 maximum back tilt only; Upright position locking; Tilt tension adjustment; Handhold for adjusting height with hydraulic mechanism. The pedestal is to be fabricated by 0.2±0.02 cm thick HR sheet, powder coated and fitted with an injection moulded black Polypropylene Hub Cap and fitted with 5 nos twin wheel castors. The pedestal should have 65 cm pitch centre diameter. The twin wheel castors are to be injection moulded in black nylon.

Visitor Chair Specification Medium back fixed chair; Seat & back made of high density foam with leatherite upholstery; Back of chair should have horizontal stitching design and fixed in ergonomic shape for extra support on back; Base made of MS chromium plated in cantiliver shape.

Visitor Chair Specification Medium back fixed chair made of PVC (lacre coated) with hand rest and cushioned seat and back.

Chair Specification Supply of medium back revolving chair for visitor. Frame with 12 mm hot pressed ply covered with moulded PU foam in seat & back with leatherite upholstery in angular stitch deisgn on both seat and back. The back of the chair is in arch shape extending below the seat. The arm rests of the chair US in D-shape steel inserted PU arms including center tilt and height adjustment mechanism with gas lift and steel inserted nylon base with castors. Overall size of the chair shall be Seat: 500 mm x 500 mm; Total height of the back rest: 960 mm; Width of the back rest at the top position: 530 mm and bottom position: 470mm and Height of the back rest: 640 mm.

Window Blinds/ Roller Curtain Specification Supply of synthetic sheet of Window Blinds/ Roller Curtain with standard thickness of approved colour and durable quality with all accessories including fitting and fixing for :

W:H - 1600 X 1500 mm

W:H: - 1400 X 1100 mm

W:H: - 1800 x 1100 mm

W:H: - 1800 X 1500 mm

Unilateral Workstation Specification Top & partition & gable end made of 18 mm thick pre-laminated particle board with both side lamination phenol formaldehyde synthetic resin of approved make and brand. Thickness of the all outer laminates: 1.00 mm & thickness of inner laminates: 0.80 mm. (conforming IS:12823, density 700 kg/m³ chemically treated for termite & borer resistant, tested resistant to abrasion, steam, crack, stain & upto 15% moisture content) of approved colour laminate is to be processed & bonded by amino-formaldehyde based/ urea melamine resins with increased melamine offering enhanced resistance. All exposed edges should be sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine. Completed with necessary hardware & fittings from approved brand; Size: L:W:H - 1050 X 600 X 1200 mm.

Workstation Chair Specification Supply of medium back revolving chair for visitor. Frame with 12 mm hot-pressed ply covered with moulded PU foam in seat & back with leatherite upholstery in angular stitch deisgn on both seat and back. The back of the chair is in arch shape extending below the seat. The arm rests of the chair us in D-shape steel inserted PU arms including center tilt and standard height. Overall size of the chair shall be: seat size 500 mm x 500 mm; total height of the back rest should be 960 mm and the width of the back rest at the top position shall be 530 mm and bottom position shall be 470 mm and height of the back rest shall be 640 mm.

Reception Table Specification Table top should be made of 25 mm thick & gable end & modesty panel made of 18 mm pre-laminated particle board (P.F resin bonded) with both side lamination with outside 1.00 mm thickness & 0.80 mm inner portion; (conforming IS-12823, density 700 kg/m³, chemically treated for termite & borer resistant, resistant to abrasion, steam, crack, stain & upto 15% moisture content) of approved colour laminate & P.F resin bonded bonded by amino-formaldehyde based/ urea melamine resins with increased melamine offering enhanced resistance with elegant design. All exposed edges to be sealed with 2 mm PVC edge banding bonded by hot melt glue tape bonding processed by automated edge banding machine. The modular structure should be fitted using Hettich make joineries; The table should have 3 drawer system on one side, with central locking arrangement; and a open shelf storage system on the other side. The front of the table shall have an arch design from the top panel; completed with necessary hardware & fittings from approved brand; Size: L:W:H - 1500 X 600 X 1050 mm

Reception Chair Specification Supply of medium back revolving chair for visitor. Frame with 12 mm hot-pressed ply covered with moulded PU foam in seat & back with leatherite upholstery in angular stitch design on both seat and back. The back of the chair should be arch shaped extending below the seat. The arm rests of the chair us in D-shape steel inserted PU arms including center tilt and height adjustment mechanism with gas lift and steel inserted nylon base with castors. Overall size of the chair shall be: seat 500 mm x 500 mm; total height of the back rest: 960 mm and width of the back rest at top position: 530 mm and bottom position: 470 mm and height of back rest: 640 mm.

Waiting Chair Specification A) Three perforated Seats on a beam; B) Use of latest technology to make the Seat Radian 17.45 degrees to make comfortable seating for the user; C) Rust and Water Resistant; D) Chrome plated handles and legs, Powder Coated Seat; E) max. wt. 325-350 kg; F) Durable parts and support with whole welded connections; G) should be supplied in Knocked down condition, easy to assemble with all tools for assembly are to be provided; H) Seat width of each Chair: 52 cm; I) Seat Bent Line: 90cm; J) Arm Length: 37 cm, Width: 31cm, Height: 4cm; K) Leg Length: 54 cm, Height: 22cm without SS base height; L) Beam: 1.7 mm thickness with durable screw tube; M) Total Out to Out Width: 180 cm; N) Height: 80 cm; O) Depth: 64 cm; P) Max. weight: 26-27 kg; Size: L:W:H - 1750 X 680 X 780 mm

Sofa Set (3+1+1) Specification Slim and sleek design sofa: 2 pcs. of 1 seater & 1 pc of 3 seater; Structure of sofa must be made of Sal wood and the base of seat and backrest webbed with nylon belt and padded with 32 density Hi Resilient Foam and upholstered in woven fabric or leatherite. Armrest should be comfortable and finished with same material; Sofa is to be supported by strong chromium plated angular MS legs; the back rest of the sofa is to be ergonomically designed with 3 design pattern for the 2 seats and back and contoured armrests; Size: L:W:H - 1770 X 750 X 780 mm

Centre Table Specification Solid teak wood Stand coated with Polyester Resin Paints; Top Glass made out of 12 mm tempered glass sheet; Shelf glass made of 8 mm tempered glass with frosted design; Size: L:W:H - 850 X 450 X 420 mm

Steel Almirah Specification Two door cabinet made of 18-20 gauge MS powder coated with glass swinging door structured by metal from all sides; 4 shelves making 5 compartments; Size : L 865 x D 480 x H 1980 mm

Steel Rack Specification Made by MS slotted angle 35 mm x 35 mm having four compartments, five shelves including top & bottom. Shelf should be made by 20 gauge C.R. sheet, nicely spray painted and all complete; Size: L:W:H - 915 X 300 X 1980 mm

Wooden Raised Platform Specification Wood work for raising 150 mm height lecture platform made of Sal wood frame covered with 24 mm thick water proof plywood, top covered with 3 mm PVC floor mat and side covered with 6 mm termite and water resistant ply with 1 mm lamination; Size: L:W:H - 3600 X 2400 X 200 mm

Student Desk Specification 2-seater sitting cum wooden desk with cushion. Made by Sal wood structure, scc. 50 mm x 50 mm, 75 mm x 25 mm, 50 mm x 25 mm, seat & table top made by 19 mm thick PF resin bonded Plywood with laminated 1.00 mm thick, breach seat cushion by 50 mm thick SD foam and approved colour cloth/ rexin; Size: L 1200 x 450/900 (back rest) and table: L-1200 W 450 x 750 (h) mm

False Ceiling Specification Providing and fixing at all height false ceiling of 12.5 mm thick gypsum board of Casoprano, Sundance variety (semi-perforated) of India gypsum or equivalent conforming to IS:2095 including the frame work by 15 mm narrow flashed stiched suspension grid system using 32 mm x 15 mm T-section and grid of 600 mm x 600mm; Main runner to be fixed by 2 mm thick pre-stretched GI wire with soffit Cleat and GI rawl plug inserted on the main roof to be fixed @ 1220 c/c. All base frame material clip should be of cold rolled steel components and coated with hot dip galvanized steel. It should have a capping of material coated with backed polyester paint. The item includes cost of two coats of primer suitable for gypsum board and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with perimeter channels suitably fixed all complete including the cost of the painting.

Display System

Projection screen (wall hanging type), size: 6'-0" L x 4'-0" H

Ceramic steel magnetic green/white boards for training hall: size: 6'-0" L x 4'-0" H

Ceramic steel magnetic green/white boards for Director’s room: 4-0" L x 3'-0" H

Public Address System Public Address System is required for a Training Hall/Seminar Room (size: 26.75 x 6.0 m; height: 3.0 m in the 1st Floor) containing 8 windows (size: 1.5 x 1.35 m) and 2 doors (1.2 x 2.1 m). The room will be furnished with 6 split air conditioners with seating capacity for 80 participants along with a dias with capacity for 6 persons/speakers. The hall/room is to be equipped with suitable Public Address System consisting of the following items of approved make and design. Amplifier – 1 no.; 2 way speaker – 6 nos.; Wireless collar microphone – 1 no.; Wireless handheld microphone with suitable stand or PA Lectern System – 1 set; Wireless handheld microphone – 2 nos.; Fitting and fixing of the entire system using 1 sq. mm. twin parallel speaker cable of approx. length 60 meters or as per site requirement including necessary connectors.

MOTHER ENTERPRISE

M/S ANU ENTERPRISE

Roy Brothers Enterprises

Roy Brothers Enterprises

SARAMA STEEL FURNITURE

MOTHER ENTERPRISE