SPECIAL REPAIRS TO TOILET, SPECIAL REPAIRS TO LIGHTS FROM CONVENTIONAL TO LED LIGHTS, SPECIAL REPAIRS TO COOLING APPLIANCES ALONGWITH PROVISION OF BARBED WIRE FENCING IN POCKET-2 AT AREA B AF STATION WADSAR UNDER GE AF CHILODA

Amount

M&L for formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete.

M&L for M-25 RCC using 20 mm graded aggregate type B1 (1:2:4) in Beams, cantilevers, bressummers, lintels over 1.5m span

M&L MS steel TMT bars 10mm dia and over cut to length ,bent to shape required including cranking bending spirally for hooping for column, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and directed.

All as per item No 3.00 above, but 5mm dia and over up to and including 10mm dia for links, stirrups, spacers and binders all as specified and directed.

M&L for brickwork with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in CM 1:4 complete.

S&F mild steel section tubular posts or struts in fencing including cutting tops to shape as directed drilling holes notching for wire etc. flat iron fillets (for securing wire mesh) including all necessary drilling, bolting etc and similar work conforming to Fe-290, Gde E-165 complete.

S&F galvanised, 2 strand, steel barbed wire, 2.24 mm dia, barbed with 2 mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of heavy duty galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. Note:- Each line wire shall be measured.

S&F galvanised steel punched type concertina coil of 1050mm dia (dia of coil when unstretched with Nos. of circles 50, Nos. of clips 230 with weight 15.60 kg/ coil and recommended and average coverage area is 6 RM/ coil) and fixed to angle iron post/ struts with 3.15mm dia GI wire complete all as specified and as directed.

S&F mild steel screw bolt (machine made) with hexagonal or square heads at one end and screwed the other end to be fitted with washers and one hexagonal nut bolt of length exceeding 22.5 cm but not exceeding 30 cm long and one side embedded in concrete posts to fix fencing wire, dia of shank 16 to 20 mm complete.

M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete.

Taking down cement or cement lime plaster any description including racking out joints, hacking for key, scrubbing down with water etc. complete.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of concrete or block masonry, brick work surfaces including finishing the surfaces even and smooth without using extra cement on internal wall surfaces all as specified and directed.

M&L for preparation of new plastered surfaces of wall & applying two coats of cement base paint over one coat of alkali resistant primer complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of wall & applying two coats of cement base paint complete all as specified.

M&L for preparation of old plastered surfaces of wall & applying two coats of exterior emulsion paint complete all as specified.

Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises.

M&L 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in levelling course complete all as specified and directed.

M&L for 15 mm thick screed bed or bedding layer of morter for laying floor finishes CM 1:6 complete all as specified and directed.

M&L for non- skid ceramic coloured joint free tiles 7 to 8mm thick (square/Rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L glazed ceramic coloured digital tiles 450x300mm x 7mm thick in vertical surface etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick backing coat of CM 1:4 etc all as specified.

M&L for rendering 10 mm thick on fair faces of concrete or block masonary CM 1:6 finished even and smooth (without using extra cement) in internal surface of wall complete all as specified and directed.

All as per item No 22.00 above but 5 mm thick in ceiling surfaces in CM 1:4 complete.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash all as specified.

M&L for preparation of new plastered surface of wall and applying two coats of white wash all as specified.

Taking up or down 15mm dia steel tubing and connection including cleaning for refixing or removal to store all as specified.

All as per tem No 26.00 above but 20 mm dia GI tubing complete.

S&F 15 mm dia steel tubing medium grade galvanised with all fittings and fixed complete to wall and ceiling or laid in floors all as directed.

All as per tem No 28.00 above but 20 mm dia GI tubing complete.

S&F in repair Fancy type CP bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair Fancy type CP Long shank bib taps 15 mm dia ,chromium plated cast copper alloy with half turn type capstan heads, screwed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed

S&F in repair Fancy type CP stop cock /angular cock 15mm dia cast copper alloy, high pressure with half turn type capstan heads, screwed both end for iron pipe or for unions and fixed.

S&F 15 mm dia pillar tapes Fancy type of Chromoum Plated brass with half turn type capstan heads screwed down high pressure, with or without lettered hot and cold with long shank, screwed shanks and fly nuts, screwed for iron pipes or for WHB complete all as specified and directed.

S&F soap dish of vitreous China white, approximate size 160x 160x90mm .

S&F Liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)

S&F aluminium anodised Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete.

S&F in repair sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and waste coupling; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.

Taking dawn PVC/CI pipe 100mm/75mm of any description all as specified and as directed by Engineer-in-Charge.

S&F CI waste and vent pipes in any length with or without ears, fixed to wall dia of pipe 100mm all as specified and as directed by Engineer-in-Charge.

S&F cast iron bend 100mm bore (any radius) dimnishing pieces or tapers with oval access doors etc.

S&F CI cowls of 100mm all as specified and as directed..

S&F 100mm cast iron sanitary connection short connection pipe of length up to 300-450mm socket to fit WC outlet etc.

M&L for bends of any type radius diminishing pieces or tapes ( large bore measured) of 75mm dia bore with oval access doors etc.

M&L for branch pices single (equal and unequal) ordenary or inserted (spigot or socket type) or with parallel branch of 75mm dia.

All as per item No 45.00 above but 100 mm size branch piece complete.

Dismantling of water tanks of exc 250 ltrs and not exceeding 500 ltrs in capacity.

S&F rotational moulded polyethylene water storage tank of 500 ltrs capacity (cylindrical verftical with closed top) hoisted and fixed in position all as specified.

S&F in repair 20mm dia (min weight 210 gms) PVC ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed.

Taking down chowkats or frame exc 1.5 Sqm and n exc 4 Sqm each (without taking off shutter from the frame).

Taking down chowkats or frame n exc 1.5 Sqm each (without taking off shutter from the frame).

S&F for solid PVC door frame of size 50mm x 47mm made out of 5mm prelam colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete

S&F factory made solid PVC moulded door shutter, 28 to 30mme thick (stiles), with 2,4 or 6 raised panel designed with 4mm thick moulded PVC sheet on front face and 4mm plain colour PVC sheet on back face as per specification and drawing complete.

M&L Aluminium powder coated (powder coated of requried colour) three track sliding windows frame top & sides of size 92x31.75x1.50mm (section No 20831), bottom size 92x31.75x1.50mm (section No 20832) and shutter top & bottom of size 40x18x1.55mm (section No 20736) and sides (handle) of size 40x18x1.55mm (section No 20738) and lock side shutter frame of size 40x18x1.45mm ( section No 20737)" with rubber gasket, beading and locking arrangement and rollers etc including making good to the disturbed portion complete including stainless steel wire mesh 0.36mm nominal dia of wire with 1.40mm average aperture and fixed with stainless steel wire staples and fixing 5mm thick glass with necessary rubber beading gasket etc all as specified and as directed by Engr-in-charge .

S&F for aluminium ventilator, louvers type, frame top & bottom of size 31x42x1.60mm (section No 20558) rectangular tub of size 40x20x2mm (section No 14019 and middle vertical of size 42x46.20x1.60mm Section (20560) and clip for fixing wire mesh and glass of size 19x17.30x0.90mm (section No 19360) thick including stainless steel wire cloth 0.36mm nomonal dia of wire and 1.40mm average width of aperture and fixed with stainless steel wire staples and supply and fixing 5mm thick forsted/pinheaded glass louvers with blades of 100mm heavy duty with necessary rubber beading, gasket etc all as specified and as directed by Engineer-in-Charge.

M&L Framed work such as grills, gratings, angle iron, purlin, wind tie etc. with end of bars shouldered and/or riveted or forged into spikes, framed guard bar , barred iron doors, railings, framed work/caging of water tank and similar works conforming to Fe 290, Gde -E-165 including hanging / locking arrangement as gate ,with hooks and pintle hinges, stops, hand-made sliding bolts including welding and fixing etc all as specified and directed.

M&L for preparation of old steel or iron surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete.

Demolition of wall of brick and stone wall built in cement mortor incl all quoins, archs, pillars,etc all as specified.

M&L for brick work with fly ash sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 all as specified.

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S&F in repair vitreous china white wash down water closet pan(pedestal pattern) including fixing bolts,plastic seat cover with jet spray and including necessary flexible pipe connection complete all as specified and removing debris out side MD land.

S&F in repair toilet paper holder vitreous china box type all as specified and as directed.

S&F in repair Health faucet (ABS) with rubit cleaning system 1.25m long PVC flexible tube & ABS wall hook all as specified and as directed.Make: Plumber

S & F in repair plastic water closet seat cover to pedestal pattern pan with chromium plated hinges.

S & F in repair vitreous china squatting pan 'Orissa pattern of size 580 x 440 mm white with integral foot rest( excluding flushing cistern and flush pipe) squatting pan including connecting to 'P' trap and to flushing pipe complete.

S&F in repair of low level flushing cystern 10 ltrs capacity body moulded from virgin quality high impact poly propoliyone and functional parts moulded from engneelicy grade ABS nylon and nylon glan complete incl brackets and 15mm bore 450mm long PVC connection all as directed.

S&F in repairs Vitreous china wash basin with pedestal flat back size 630X450 mm white, excluding taps, waste ,chain and plug and chain porcelain stopper but including brackets cutting for and pinning in ends of brackets or erecting stand.

S&F PVC water connection 600mm long to wash basin of 15mm dia incl CP nuts and washers all as specified and as direcetd by EIC.

S&F waste coupling of 32mm dia brass CP for glazed ware sink basins, etyc with long screwed shanks and fly nuts fanges end bedded in red lead cement and other end fixed. complete all as specified and directed

S&F in Vitreous china urinal full stall type white (excl flushing cistern) flush pipe and waste pipe

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm.

Taking out existing unserviceable plaster, loose unsound weaken cement concrete of any description and in any position from existing surface of RCC roof sab/RCC facia/ beams/ columns/ RCC chajja, average depth 25mm (approximate 6.5 mtrs height from natural GL) with power driven pneumatic chiesel and removal of debries upto a distence 500 mtrs out side MD land including saw cutting of all edges, making square shoulders of cavaties and roughening of smooth surface, scraping out and removing corrosion and all loose scales, rust etc from the visible reinforcement and cleaning the steel reinforecement properly providing NIT zink primer of FOSROC or equivalent. Zink primer of CHEMISTIC/WEBAC on visible reinforcement surface to form a contineous film and preparing the surface to recive concrete of epoxy grouting mortar etc all as specified including providing necessary scaffolding

M&L for applying bonding coat of modified styrene butadene emulsion (SBR bonding agent i.e nitobond SBR 45 or equivalent as approved) in proportion 1 Part (nitobond SBR 45:1 part (water) :3 part (OP cement) by volume with the brushes etc to bind new cement plaster/ polymer modified plaster/ concrete / screed concrete with oldsurface including removal of loose/ distengrated old concrete/ plaster including preparation of surface etc complete all as specified and as directed.

M&L for applying 25-35mm average thickness plaster on ceiling slab and chajja projections, facia and beams with polymer modified mortar firtified with SBR (Nitobond SBR 45 of FOSROC or equivalent of PIDILITE/ R or M International Mumbai/ 21 SHM mumbai) in proportion 1 part (cement):3 part (sand) by weight of cement with 11 to 15 ltrs water addition, finishing surface to match with existing adjoining surface complete all as specified and directed

Cutting chases, in brick walls pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of endings steps, cills sunshades, shelves lintels etc and cutting chases for concealed water tubing and making good cutting not exc 10 cm girth complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4, as in landings cover slabs (for man holes etc) chajjas , water through, mangers, shelves and similar articles with plain faces fair faces, incl chamfers, throating etc and setting in mortar 1 : 6 complete with joints to match complete all as specified and as directed.

S&F in repair 75 mm dia outlet CI nahani trap plain with S/S grating including jointing with solvent cement complete all as specified and directed.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed.

S&F for 150mm long aluminium handle cast type anodized all as specified and as directed by Engineer-in-Charge.

Excavating in trenches, n.exc 1.5m wide and n.exc 1.5m in depth, for foundation etc or for shafts, wells etc n exc 10 Sqm on plan and nexc 1.5m in depth and getting out in soft/loose soil upto first man holes complete all as specified and as directed.

Removing excavated material exc 50m & n exc 250m depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers no exc 25cm in soft/loose soil complete all as specified and as directed.

M & L reinforced cement concrte 150mm dia pipes, class NP2, laid and jointed complete with collars including dismantling of existing any pipe etc complete all as specified and as directed.

M & L cement concrete 1:4:8 bed to drain pipes of 150mm bore including packing under and haunching sides of pipes after they are laid tested complete all as specified and as directed.

M & L cement concrete 1:4:8 as in foundations, filling and mass concrete complete all as specified and as directed.

M & L pre cast cement concrete 1:3:6, block masanory with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

M&L for Providing precast cement concrete 1:2:4, as in landings cover slabs (for man holes etc) chajjas , water through, mangers, shelves and similar articles with plain faces fair faces, incl chamfers, throating etc and setting in mortar 1 : 6 complete with joints to match complete all as specified and as directed.

M & L mild steel bars 6mm to 8mm dia , cut to length, bent to shape required including cracking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, molds, mitered/stopped ends etc. Complete all as specified and as directed.

M&L for cement concrete Type B-1 (1:2:4) (using 20mm graded stone aggregate) as in copings, cills, steps, bed plates, kerb and similar work including weathering, slightly rounded or chamfered angles and throating,complete all as specified and as directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required for 150 mm bore pipe complete all as specified and as directed.

Taking down carefully existing unserviceable point wiring of any type, size and description (light, fan, socket outlet etc.) including removal of batten, pipes, sockets, switches, ceiling roses, light fittings etc. complete and making good to the disturbed surface to match with existing all as specified and directed.

Taking down main switches, distribution boards etc of any type and any capacity alongwith existing boards and removing the same from site and making good the disturbed surface/ portion of walls etc complete all as specified and as directed.

Taking down carefully old and unservicable sub-main wiring of any size and description and removing the same from site and making good the disturbed surface/ portion of walls etc complete all as specified and as directed.

M&L for concealed sub main wiring of single PVC insulated FRLS, unsheathed cables with stranded copper conductor 1100 volts grade, 4.0 Sqmm (Nominal area) alongwith one single core of 4.0 Sqmm size stranded copper conductor (PVC insulated FRLS) as continuous earth wire in (in green colour) to common earth alloy drawing in PVC conduit pipe of 25 mm dia (medium grade) in concealed surface in wall / ceiling all as specified and directed. Note:- Two runs of single core cable with one run of earth continuity cable and accessories will be measured and paid as one unit.

M & L for concealed point wiring complete with PVC insulated /unsheathed stranded copper conductor of wire 1.5 Sqmm , 1100 volt grade , alongwith one single core of same size stranded copper as continuous earth wire to common earth dolly in and including PVC conduit pipe fitting medium grade of 20 mm dia fixed in concealed surface of wall/ceilling/false ceilling including cutting /chasing in wall as required with powder coated sheet metal terminal boxes of required sizes and thickness (factory made) sunk in wall only with 3.0mm thick laminated sheet where as required and accessories complete suitable for the following :-

(a) One light/fan point controlled by one one way switch

(b) One socket outlet 05 Amps on the same board

All as per item No. 96.00 above but point wiring with 2.5 Sqmm cable and 2.5 Sqmm earth continuity conductor for 3 pin 15 Amp socket and all as specified and directed.

S& F ceiling rose, 5 Amps surface type 240 volts bakelite three terminal as ordered and directed .

S&F Switch piano, single pole one way 5 Amps 240 volt capacity flush type all as specified.

S&F 5 pin, 5 Amps switch & socket combination flush type multipurpose 2 in 1 ( 2pin & 3 pin) and all as specified and directed.

Supply and fix 3 pin 15 Amps switch socket combination, flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) all as specified.

Supply & fix sheet metal enclosures for flush/surface mounting double door distribution board 8 way, factory made and tested complete, suitable for mounting MCBs with 200 Amps tinned copper bus bar, cable lugs complete.

S & F MCB DP of rating 40 Amp, 240 Volt, 10 KA, 'C' series.

S & F MCB SP of rating, 06 to 32 Amp,240 volt, 10 KA 'B' Series.

S & F LED light fittings 18W, 230 Volt, 6000K, wall mounted LED batten & LED Rod seperate, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, LED rod complete with all accessories internallly prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 300mm.

Dismantling and taking down fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store or as schedule of credit all as specified and as directed.

S & F in replacement of LED light fittings 18W, 230 Volt, 6000K, wall mounted LED batten & LED Rod seperate, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, LED rod complete with all accessories internallly prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.

S&F in replacement LED Building light luminaire 1x25W having IP-65 protection,di-cast, aluminium alloy for housing having heat dissipation fins,sturdiness & corrision resistant,roadway luminaire powered by an integral driver , high power LED as light source, minimum lemen efficacy of 100 lm/w including bracket of suitable size with all accessories all as specified and directed by Engineer in Charge.

S&F in replacement 36 W LED recess mounting fitting(2' x 2') CRCA powder coated having polycarbonate diffuser powedered by independent electronic LED driver haing IP 20 protection,CCT 6000 K,230/240 VAC,lumen efficacy > 100 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

S & F in replacement of HIGHBAY/MEDIUM BAY LED light fittings 80W, 230 Volt, 6000K,Lumen efficacy > 100 lm/w including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and as directed.

Supply, install ,testing and commissioning of air cooled split unit Air conditioners 1.5 TR with minimum 3 star rating and EER 3.2 indoor,of electric driven single phase, 240 volt,Copper condenser,eco friendly refrigerant ,AC (outdoor & indoor unit)suitable for wall mounted with and including MS powder coated brackets and making/breaking hole through the wall for and passing the suction/discharge line including excess copper tubing if required beyond the length supplied with AC unit but not more than 5.00m and PVC conduit of 15mm dia not exceeding 2.5 m. long in concealed surface of wall for drainage of water, making good to disturbed surfaces with cement mortor of ratio 1:3 over and including coats of oil bound distemper over a coat of primer of matching colour complete all as directed. Note :- Rate for MS powder coated stand and extra copper pipe required shall be deemed to be include in quoted rates.

M&L for concealed sub main wiring,four run of 06 Sqmm single complete with PVC insulated /unsheathed stranded copper conductor 1100V grade,FRLS , 6.0 Sqmm (nominal area) along with two run of single core of 6.0 Sqmm size stranded copper conductor (PVC insulated FRLS) as continuous earth wire in (green colour) to common earth dolly drawn through and including PVC casing - capping of size 25 x 16mm and accessories of suitable size and fixed on wall/ceiling Note:- Two runs of single core cable with one run of earth continuity cable including PVC conduit and accessories will be measured and paid as one unit.

S & F for sheet metal enclosure Single door type for flush/surface mounting distribution board, factory made and tested complete, suitable for mounting MCB’s SPN 240 Volt 2 way complete

S&F AC mounting bracket 24 inch heavy duty wall mounted bracket load bearing capacity upto 50 kg all as per the direction of Engr-in-charge.