Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹44.8 L
EMD Value
₹74,800
Closing Date
13 Oct 2026, 10:30 am3d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer HPPWD Division Barsar
Executive Engineer HPPWD Division Barsar
P/L Correction layer G.S.B. and M/T in Km. 0/0 to 2/0)
2026_PWD_144890_1
6465-6515 dated 01-10-2026
Open Tender
Civil Works - Roads
Percentage
90 days
Barsar
Please refer Tender documents.
16 documents required · 16 mandatory
₹2,000
₹74,800
6 Oct 2026
6 Oct 2026
13 Oct 2026
6 Oct 2026
13 Oct 2026
6 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Construction of granular sub base by providing well graded material mixing in a mechanical mix plant at OMC carriage of mixed material to work site upto all leads spreading in uniform layers with motor grader on prepared surface and compacted with smooth wheel roller to achieve the desired density, complete as per technical Specification Clause 401. for grading –I material including carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 96 | Cubic metre | 1,700 | ₹1,63,200 |
| 2 | Providing and laying spreading and compacting stone aggregates to wet mix macadam 150mm(one hundred fifty millimetre) thick to be laid in two equal layers 75mm( seven five millimetre) each specification including premixing the material with water at OMC in mechanical mixer (pug Mill) carriage of mixed material by tipper to site laying in uniform layers in sub base / base course on a well prepared sub base and competing with smooth wheel roller of 80-100KN weight to achieve the desired density including lighting barricading and maintenance of diversion etc. as per table 400-11 &400-12 and Technical specification clause 406. carriage of materials within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 1,008 | cubic metre | 1,850 | ₹18,64,800 |
| 3 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85kg (Zero point eight five kilogram )per square metre using mechanical means as per technical Specification Clause 502 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 6,405 | Square metre | 84.4 | ₹5,40,582 |
| 4 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.225 kg(zero point two hundred twenty five kilogram ) per square metre on the prepared granular surface treated with primer and cleaned with hydraulic broom as per Technical Specification Clause 503 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 6,405 | Square metre | 28.05 | ₹1,79,660.25 |
| 5 | Providing laying and rolling of open-graded premix carpet of 20mm (twenty millimetre) thickness composed of 13.2mm to 5.6mm(thirteen point two millimetre to five point six millimetre) crushed stone aggregates at the rate 0.27cum (zero point two seven cubic metre) mixed with 14.6kg( fourteen point six kilogram)per ten square metre bitumen VG-10(viscosity grade ten) in suitable plant and laying by paver finisher to required line , grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100KN(eighty to one hundred) static roller capacity , finished to required level and grades to be followed by seal coat of Type-B as per Technical Specification Clause 508, by mechanical means including entire carriage of material within all leads and lifts and other incidentals . The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 6,405 | Square metre | 195.05 | ₹12,49,295.25 |
| 6 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type-B as per Technical Specification Clause 510, using bitumen VG-10 (viscosity grade ten) at the rate 6.8kg ( six point eight kilogram ) premixed with 0.06 cum (zero point zero six cubic metre)fine aggregate per 10.00 sqm (ten square metre) laid by mechanical means including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive octroi , royality , Malkana, toll tax, or other taxes but excluding GST imposed by the Government . | 6,405 | Square metre | 75.4 | ₹4,82,937 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
SBD.pdf
Tender Documents • 5.36 MB
BOQ_215594.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .