Renovation , addition and alteration of ground floor of Temple Office Building for TTSNDJI Distt.- Bilaspur (HP)

Amount

Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) In cement mortor.

Demolishing cement concrete manually /by mechanical means including disposal of material complete all respect, (a) Nominal concrete 1:3:6 or richer mix (I/C equvalent design mix within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

steel work welded in built up sections/ framed work, including cutting hoisting fixing in posposal and applying a priming coat of approved steel prirner using structural steel etc. as required : - In gratings frames guard bar ladder railings brackets gales and similar works within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) ISI make.

Brick work with common burnt clay F. P. S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor v level in all shapes and sizes in - Cenent morta1.6 (cement :6 coarse sand ). within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.: -- (a) Brick work

Half Brick Massonary in Common burnt clay building brick F.P.S. (Non modular) building bricks of class designation 7.5 in super structure above plinth level up to floor all level (a) cement mortar 1:3 ( 1 cement :3 send) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing wood work in frames of doors windows clerestory windows and other frames wrought framad and fixed in position with hold fast lugs or with dash fasteners of required dado & length sal wood within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Sal Wood.

15 mm cement plaster on rough side of single or half brick wall of mix (a) 1.6 (1cement : 6 coarse send) within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing panelled or panelled and glazed shutters for doors windows and clearstory windows fixing with butt hinges of required size with necessary screws excluding panelling which will be paid for separately all complete as per direction of Engineer-in- charge ( second class teak wood (i) 35 mm thick shutter within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) 35 mm thick shutter second class teak wood.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors windows and clerestory windows (Area of opening for panel insorts excluding portion inside grooves or rebates to be measured) Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick :- (a) Decorative plywood both side decorative veneer (type -1) conforming to is 1328 BWR type within all metres leads & lifts, all complete as per direction of Engineer-in-charge

Providing and fixing wire gauge shutters using glavanized M.S wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors windows and clerestory windows with hinges and necessary screws :(a) second class teak wood (i) 35 mm thick within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) 35 mm thick complete in all respect

Providing and laying in position cement concrete of specified ggrade excluding the cost of centering and shuttering - all work upto plinth level :(a) 1:3:6 (1 cement : 3 corse sand) : 6 graded stone aggregate 20 mm nominal size within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make in all colours and shades laid on 20mm thick cement mortar 1:4 (1coment : 4 coarse send) jointing with grey cement slurry @ 3.3 kg/ sqm including grouthing the joints with white cement and matching pigments etc complete:-(a) Size of tile 800x1600mm within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Kazaria or equavalent make size of tiles 800x1600mm.

Providing and laying vitrified tiles in different size (thicknees to be specified by the manufacturer),with water absorption lees than 0.08% and conforming to is : 15622 of approved brand & manufacturer, in all colours and shade, in skirthing riser of steps lad with cement based high polymer modified quick set tile adhesive (water based) conforming to is: 15477 in average 6mm thickness including grouting of joints (Payment for grouting of joints to be made separately). (a) size of tile 500x500 mm within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Kazaria or equavalent make size of tiles 500x 500mm.

Providing and fixing skirting and ceilling with pre- iaminated medium density fibre board exterior grade (Grade-1) conforming to is: 14587:1998 marked with (one side decorative and other side balancing iamination and edges to be sealed with pvc edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc all complete. : (a) 18 mm thick PVC sheet within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing duel purpose vitreous china closet suitable for use as squatting pan or european type water closet ( Anglo Indian W.C. pan ) with seat & lid fixed with CP brass hingess and runher buffers 10 litre low level flushing cisterm with fitting and brackets. 40 mm flush bend 20 mm over flow pipewith specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required: within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.: (a) Cera or equvalent make

Providing and fixing duel purpose vitreous china closet suitable for use as squatting pan or european type water closet ( Anglo Indian W.C. pan ) with seat & lid fixed with CP brass hingess and runher buffers 10 litre low level flushing cisterm with fitting and brackets. 40 mm flush bend 20 mm over flow pipewith specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets cutting and making good the walls and floors wherever required: within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.: (a) Cera or equvalent make

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing 8 mm dia C P. / S.S jet with flexible tube upto 1 metre long with S.S triangular plate to eureopean type W. C. of quality and make as approved. within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing 600 x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p brass screws and washer completed within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with cp brass screws with concealed fitting arrangement of approved quality and colour:- (a) 450 mm long towel eail with total length of 495 mm 75 mm wide and effective height of 88 mm weighing not less than 170 gms within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) 15 mm dia nominal bore Hissar Jindal B class make

Providing and fixing C.P. brass Bib Cock for basin mixer and geyser points opf approved quality conforming to is: 8931 within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge (a) 15mm nominai bore Hissar Jindal B class make

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to is: 8931 in all leads and lifts as per direction and best satisfaction of Engineer - in- charge (a) 15mm nominal bore Hissar Jindal B class make

P/Laying Centering and shuttering including strutting, propping etc. and removal of form for: (a) Suspended floors roof landings balconies and access platform in all leads and lifts as per direction and best satisfaction of Engineer - in- charge

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up plinth level :- 1:2:4 ( (1 cement : 2 coarse send) : 4 graded stone aggregate 20 mm nominal size in all leads and lifts as per direction and best satisfaction of Engineer - in- charge

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Mild steel and Medium Tensile steel bars (ISI make)

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge. (a) Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye erequivalent.

Providing and fixing stainless steel A (ISI 304) (18/8) kitchen sink as per is:13983 with C.I. brackets and stainless steel plug 40mm incliding painting of fiotting and brackets cutting and making good the walls wherever required within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge (a) kitchen sink withouty drain board 610x510 mm bowl depth 200 best satisfaction of Engineer - in- charge

P/fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked i/c fixing with approved adhesive etc. within all metres leads and lifts as per direction and best satisfaction of Engineer - in- chargecomplete.( Finolex or equivalent make.)(a) 75 mm dia pipes

(b) 110 mm dia pipes within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.( finolex or equivalent make.)

P/Fixing PVC floor trap of self cleaning design with grating without vent arm complete i/c cost of cutting and making goods the walls and floor Of finolex or equivalent make within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge:-(a) 110x75mm nominal diameter

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levvers and a pair of lever handles of approved quality with necessary screws etc complete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge:(a) 250x16mm.

Providing and fixing aluminuam extruded section body tubular tytpe universal hydraulic door closer (having brand brand logo with isi is 3564 embossed on the body door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessany accessoies and screws within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge

Providing and fixing ISI marked charomium plated tower bolt black finish, (Barrel type) with necessary screws etc. complete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge : (a) 100x10 mm

Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge:(a) 100 mm

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.(a) With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge (a) Two coats

French spirit polishing :- within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge (a) Two or more coats on new works including a coat of wood filler complete in all respect

Provinding and Applying high quality acrylic modified resin based texture of Dholpur /Red sand stone pattern with anti algae and UV resistence properties applied as intermediate finish pattern @ 43.04 Kgs / 10 sqm to from film of 1-1.5 mm thickness after scrapping and properly cleaning the surface to remove loose paticales from the plaster surface followed by top with premium Acrylic smooth exterior paint with silicon additives required shade by two or more coats @ 1.43 litres /10 sqm within all metres leads and lifts as per direction and best satisfaction of Engineer - in- charge.

Vijay Kumar (BID ID -580871)

Krishna Chand (BID ID -580919)