Karnataka

AOC

Works

Canals including Lining and Structures

AME of Varahi Left Bank Canal From Ch. 0.00 to 37.00km And Its Distributaries, Greasing, Repairing of Head Regulators and PO outlet Gates and AME for Varahi Irrigation Project Colony,Repair works to Electricity Supply Networks and Water supply Networks, Repairs of Office Buildings and Residential Buildings at Varahi Irrigation Project Colony for the year 2025-26.

Karnataka Neeravari Nigam Limited

KNNL Division Varahi Project Div No 1 Siddapura | Mysuru, Karnataka

Amount: ₹30.9 LCloses: 19 Nov 2025Closed

Timeline

Published12 Nov 2025
Closed19 Nov 2025
Awarded—

Bids

1 Bid19 Nov 2025

#	Company	Amount	Status
1	DAYANANDA ₹31.8 Laccepted-aoc	₹31.8 L	accepted-aoc

Tender Value

₹30.9 L

EMD Value

₹61,840

Closing Date

19 Nov 2025, 10:30 pmClosed

Tender Inviting Authority

Office Inviting Bids

Karnataka Neeravari Nigam Limited

Contact Person

N G Bhatt

Office Number

Mobile Number

Work Description

AME of Varahi Left Bank Canal From Ch. 0.00 to 37.00km And Its Distributaries, Greasing, Repairing of Head Regulators and PO outlet Gates and AME for Varahi Irrigation Project Colony, Repair works to Electricity Supply Networks and Water supply Networks, Repairs of Office Buildings and Residential Buildings at Varahi Irrigation Project Colony for the year 2025-26.

Tender Information

Tender ID

KNNL/2025-26/CN/WORK_INDENT3367

Reference Number

KNNL/2025-26/CN/WORK_INDENT3367

Tender Type

Open

Product Category

Canals including Lining and Structures

Form of Contract

Two Tender Document System(Two Cover)

Location

KNNL Division Varahi Project Div No 1 Siddapura

Source Website

Subscribe to view

Documents Required

7 documents required · 7 mandatory

Technical Bid

RequiredA copy of the valid KPWD Class III and above Civil Contractor registration certificate, For KPWD class III registered contractor shall be enrolled under KPWD, Manglore circle

RequiredA copy of the valid Employees Provident Fund registration Certificate

RequiredEach tenderer must pay specified full E.M.D. in the e-procurement platform through any of the payment modes as- a. Credit card b. Direct Debit c. National Electronic fund transfer -NEFT d. Over the counter -OTC. Tenders without valid E.M.D. shall be rejected

RequiredThe valid copy of GST Registration Certificate

RequiredThe annual turnover of intending bidder shall not be less than equal to amount put to tender i.e., Rs.36.49 lakhs in any two financial years during the last 5 years i.e, from 2020-21 to 2024-25 in all Classes of Civil Engineering Construction works only. The audit Profit and Loss account certified by a practicing Chartered Accountant duly showing with UDIN i.e Unique Document Identification Number along with income tax return filed should be uploaded.

RequiredThe intending bidder should have in last five years i.e. from 2020-21 to 2024-25 satisfactorily completed at least 90 Percentage of the contract value as a prime contractor at least one similar nature of work such as i.e Repair of Head Regulators and PO outlet Gates and Improvements of canal and Repairs for buildings of value not less than 50 percentage of the estimate value of amount put to tender i.e. Rs.18.25 lakhs

RequiredTender Capacity Eligible Tenderers will be qualified only, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as underAssessed available tender capacity -AxNx2.5-B

Eligibility Criteria

All the documents must be attested, scanned and uploaded.

The contractor should neither make any alteration in the conditions of contract or not stipulate any conditions of his own.

The 2nd Electronic document i.e., Financial bid of all the participated bidder will be opened after approval of the technical bidqualification among eligible bidders the lowest bidder will be identified. If the lowest bidder fails to produce the original documents for entering into an agreement or the original documents submitted does not match with the uploaded documents or found false, then his bid is treated as non-responsive bid as per clause-26(4) of the KTPP rules & his name would be recommended for the removal from the select list of KPWD enrolment and barred from participation in any of the tenders invited by the KNNL apart from forfeiting the EMD paid through e-cash.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Evaluation will be done based on the information provided by the contractor as per the document uploaded through e-procurement the correctness of the uploaded document will be verified if necessary.

Any bidders who is otherwise technically qualified withdraws from the bidding process at any stage before a final decisions taken on the tender, the EMD of such bidder shall be forfeited, the name of such bidder shall be recommended for removal from the KPWD contractors at least for a minimum period of one year in KNNL, besides making such bidders liable for black listing.

Any of the bidder who withdraws from the bidding process after completion of tender submission date at any stage before a final decision taken on the tender, the EMD of such bidder shall be forfeited and the name of such bidder shall be removed from the select list of KPWD registration and barred from participation in any of the tenders invited by KNNL thereafter

GST: The tenderer should quote the rate with respect to the amount shown as work portion Part-A in Column No-3 of Statement showing the details of work under Invitation For Tenders (IFT). However GST will be paid separately as per the prevailing rates as applicable under laws subject to the conditions mentioned in the Govt. circular No. FD 417 EXP-12/2024 dated 09-08-2024

The bidders shall ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-procurement on or before the last date of bid submission (Through Electronic Media)

The tenderer is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The department shall not be responsible for non-accessibility of e-Procurement portal due to internet connectivity issues and technical glitches.

Even though the agency/firm meets the qualifying criteria, they are subjected to disqualification if they have made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and incomplete filling of details in the prequalification document.

The evaluation of pre-qualification will be done based on the information provided by the contractor as per the documents uploaded through e-procurement. The correctness of the uploaded documents will be verified if necessary.

Conditional tenders will be rejected. The officer competent to accept the tender shall have the right to reject any or all the tender without assigning any reason whatsoever

Taxes will be deducted at the prevailing rates.

The intending bidders are advised to visit the site of work before attending and also submitting their tenders.

Karnataka Neeravari Nigam Ltd., Reserves the right to verify the correctness of the statements and documents furnished and inspect the jobs executed by the agency/firm, if found necessary.

The Tenders are invited as per Standard tender Bid Document of KW-2

All relevant documents as per the KNNL need to be uploaded while submitting bid in general documents provision in e-procurement portal.

Contractors should follow strictly prevailing rules of labour act.

Bidders should not be under any declaration of ineligibility for corrupt and Fraudulent practices issued by Government of Karnataka

Scanned Signature of the Bidder/Authorized Representative incase of firm/company to be attached while uploading bid documents along with valid power of attorney.

The officer competent to accept the tenders shall have the right to reject any or all the tenders without assigning any reason and whatsoever.

The Contractor should adhere to the accepted execution plan submitted by his under any circumstances without linking to the pending payment of the work & also land acquisition problem if any.

Considering the availability of funds, the bill of the Agency will be paid

Tenders from Joint ventures are not acceptable.

Relevant documents must be uploaded wherever necessary.

If any of the dates mentioned in the Calendar of events happened to be declared holiday, the next working day holds good for event.

Bidder should having Annual Turnover of more than Rs.100.00crores shall submit GST E-Invoice, while claiming the Bills under the above work.

The uploaded drawings are for Tender purpose only.

Further information about tendering can be had from https://kppp.karnataka.gov.in and office of the undersigned during office hours. (08259-284240)

Further corrigendum/modifications/corrections/addendum if any can be had from www.kppp.Karnataka.gov.in.

The selected bidder should produce MDP copy while submitting the bill from the compitative authority, authorized by the Mines and Geology Department of Karnataka 5 times of Royalty amount deducted in the absence of MDP (As per Government order Ltr No. M&Go/DCB/2023-24 Dated:07-11-2023)

Technical Criteria

General

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

Past Experience

The intending bidder should have satisfactorily completed (at least 90% of the contract value) as a prime contractor at least one similar nature of work i.e Repair of Head Regulators and PO outlet Gates and Improvements of canal and Repairs for buildings of value not less than 50% of the estimate value of amount put to tender i.e., Rs.18.25 lakhs in last five years i.e., from 2020-21 to 2024-25. The Work done certificates obtained from the officer not below rank of Executive Engineer should be uploaded. The work done value of the previous year shall be updated to present price level of 2025-26 at 10% per annum.

Work Done Certificate

Tenderers who meet the above specified minimum qualifying criteria, will only be qualified if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under- Assessed available tender capacity-AxNx2.5 - B where A -Maximum value of civil engineering works executed in any one year during the last five years updated to 2025-26 price level taking into account the completed as well as works in progress. N Number of years prescribed for completion of the works for which tenders are invited. B Value at 2025-26 price level, of existing commitments and on-going works to be completed during the next 4/12 year period of completion of the works for which Tender are invited Note-The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent

Others -- Tender Capacity

Capabilities of Vendor

A copy of the valid KPWD Class III and above Civil Contractor registration certificate, For KPWD class III registered contractor shall be enrolled under KPWD, Manglore circle

PWD Registration Certificate (Class I/II/III/IV)

A copy of the valid Employees Provident Fund (EPF) registration Certificate.

Valid EPF Certificate

GST Registration Certificate

GST Registration

Financial Status

Each tenderer must pay specified full E.M.D. in the e-procurement platform through any of the payment modes as:- a) Credit card b) Direct Debit c)National Electronic fund transfer (NEFT) d)Over the counter (OTC). Tenders without valid E.M.D. shall be rejected

Others -- Each tenderer must pay specified full E.M.D. in the e-procurement platform

The annual turnover of intending bidder shall not be less than equal to amount put to tender i.e., Rs.36.49 lakhs in any two financial years during the last 5 years i.e, from 2020-21 to 2024-25. (in all Classes of Civil Engineering Construction works only). The audit Profit and Loss account certified by a practicing Chartered Accountant duly showing with UDIN i.e (Unique Document Identification Number) along with income tax return should be uploaded. The turnover of previous years will be updated to the present value of the year 2025-26 giving weightage of 10% for each previous year turnover value

Audited CA Certificate of Annual Turnover

Fee & Financial Details

Tender Fee Amount

₹780

EMD Fee Amount

₹61,840

Important Dates

Last Activity

19 Nov 2025

Published

12 Nov 2025

Bid Opening

20 Nov 2025

Download Ends

17 Nov 2025

BOQ Preview

•

AME of Varahi Left Bank Canal From Ch. 0.00 to 37.00km And Its Distributaries, Greasing, Repairing of Head Regulators and PO outlet Gates and AME for Varahi Irrigation Project Colony,Repair works to Electricity Supply Networks and Water supply Networks, Repairs of Office Buildings and Residential Buildings at Varahi Irrigation Project Colony for the year 2025-26.

•

Providing and applying grease of approved quality to gate and hoist components requiring greasing as part of the annual maintenance using grease gun wherever necessary including cost of all materials,...

•

Removing and hauling all kinds of soil / soft rock including boulders upto 0.6 m diameter slipped due to natural causes and disposing off the same in specified dump area or as directed by manual mean...

•

Cleaning gates / hoists / embedded parts for re-painting by removing rust, old paint, grease by using wire brush, scrubber, rust remover including cost of all materials, labour, machinery, scaffolding...

•

Design, fabrication, supply, erection, testing and commissioning of fixed wheel type vertical lift service gate consisting of skin plate, vertical and horizontal girders, wheels, stiffeners, lifting b...

•

Clearing and grubbing road land By Mechanical Means using Dozer .(In area of thorny jungle) including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal o...

•

Cutting of Trees, excluding removal of stumps and roots of trees Girth above 1800 mm , complete with all lead and lift as directed by Engineer in Charge.

•

Earth work excavation for Foundation by mechanical means for all works & all depth as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, ...

•

Providing and laying in position Cement Concrete Mix 1:3:6 Using 40 mm nominal size graded crushed coarse aggregates for levelling course for all works in foundation. The granite/trap/basalt crushed g...

•

Providing and constructing laterite size stone masonry For Basement in CM 1:6.including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive ...

•

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement:4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inc...

•

Providing hearting / casing embankment using homogeneous approved soil from borrow areas in layers of 250 to 300 mm ( before compaction) including cost of all materials, machinery, labour, all other o...

•

Providing and laying 100mm thick pre-cast cover slabs over Road side drains / utility ducts / Rain water harvesting pit of width not exceeding 1000 mm using M20 concrete reinforced with TMT bars Fe 55...

•

Providing and laying 60mm thick factory made precast M -30 grade Cement Concrete Paver Block as per IRC SP 63:2018 & IS 15658 for Cycle Tracks & Pedestrian Footpaths of approved shape and colour, laid...

•

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Materia...

•

Providing Sal wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, usage charges complete as per specifications, etc,complete with all lead and lift...

•

Painting (one coats) with black Japan paint of approved brand and manufacture to give an even shade. including preparing the surface after thoroughly cleaning the surface to remove all dirt, dust and ...

•

Supplying and fixing new Mangalore tiles on existing reepers, etc,complete with all lead and lift as directed by Engineer in Charge.

•

Removing and fixing Old Mangalore tiles on existing reepers,etc complete with all lead and lift as directed by Engineer in Charge.

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves , including cost of materials, labour, us...

•

Providing and fixing in position fully panelled Honne wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per drawin...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...

•

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mount...

•

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of...

•

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gree...

•

Supply of LED floodlight luminaire with pressure die cast aluminum housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polycar...

•

Supply of LED street light luminaire with pressure die cast aluminum housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energycross-3 with Short circuit breaking capac...

•

Supplying & fixing of Porcelain 32 A fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers, etc,complete with all lead and lift as directed by Engineer in Charge.

•

Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirmingto IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for worki...

•

Supply and Installation/ Fixing/ Provision of Outdoor type Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproof, ...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Tender notification-.doc

Others - Tender Notification • 0.10 MB

PO GATE BID.docx

Tender Document • 8.64 MB

drawings indent 3367.pdf

Others - Drawings • 0.98 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

DAYANANDA

₹31.8 Laccepted-aoc