WBMAD/ULB/RM/NIT- 22e/25-26/SL24

Dismantling all types plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m………..a) In ground floor including roof. (a) Upto 150 mm thick.

Earthwork in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75m as directed.......... complete. a) Depth of excn. not exceeding 1500 mm.

Single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with powdered earth or local sand.

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing ......... (a) 25 mm to 30 mm wooden shuttering ... i) In Gr.Floor.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups binders etc including supply of rods, initial straightening.......... (a) for works in foundation, basement and upto roof of ground floor / upto 4m. . (i) Tor steel/Mild steel . II.JSW/JSPL/SHYAM/BMASL/ELECROSTEEL....

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes a) Pakur Variety

M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 cnnected to one another with bracket, gusset cleats as per design, direction of Engineer-in-charge complete………....... i) For trusses spanning up to 12.00 m.

Suppling,fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq.metre( followed by colour coated on both side) steel sheet work……… ( I ) In Roof a) With 0.5 mm th.sheet.

Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. 160 mm dia

Galvanised iron sheet ridging fitted with necessary bolts, screws,washers etc.complite(225 mm end laping) (A) 300 mm laping each way (b) With 0.63 mm sheet

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) - (ii) Two coats (white in shade)

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately]. Note: Sub-grade CBR should not be less than 5. (b) 50 mm thick interlocking designer concrete paver block M- 30 grade for non-traffic zone,buiding premises,garden,parks,domestic drive as per IS: 15658- 2006(over 20-30 mm medium sand bed on 200mm thk bound gnaular /granular base course including cost of sand for sand bed but excluding cost of base course & subgrade preparation.) (ii) Coloured Decorative

Sub Total

Please Enable Macros to View BoQ information