Replacement of inefficient CFL light into efficient LED light of Adm Block under SHQ BSF Teliamura

Supplying installation tetsting and commissioning of 24Watt panel light 1x1 ft. of following body material and constrcution as per IS:10322 with driver as per the requirement with driver efficiency >85%, operating voltage AC 140-270Volt, frequency 50/60 Hz, operating temp range -5 degree to 40 degree, internal surge protection of 2.5KV with short & open circuit protection, THD<10%, P.F>0.95, IP20, CRI>80, UGR(unified glare rating)<19, flicker of minimum 50000 burning hours with with 70% of initial lumen maintained till date ends as per LM80 extrapolation IES TM-21-11 report, CCT 5700/6500K (as per ANSI Bin), SDCM(Standard deviation colour matching)<3, maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard. Manufactures work mark/Name of enfraved/Embossing/Screen printing on housing. complete in all respect i/c external connection with 1.5 sq.mm FRLS/HFER PVC insulated copper conductor single core and earthing etc. as required with minimum 5 year OEM warranty. System lumen efficacy >140 lm/Watt output LM79 & LM80 test report and all testing required for LED fixture as per BIS shall be submitted. Shape size and CCT shall be as approved by engineer in charge as per requirement.(thermal management : heat sink of aluminium housing such that LED junction temperature shall not rise above 90 degree) power coated die cast/ectruded aluminium body (thickness>1.20mm). Make- Pluto surface 24W (1x1 ft.)

Supplying installation testing & commissioning of 30 Watt Panel light 2x2 ft. of following body material and construction as per IS: 10322 with driver as per the requirement with driver efficiency >85%, operating voltage AC 140-270 Volt, frequency 50/60 Hz, operating temp range -5 degree to 35 degree, internal surge protection of 2.5KV with short & open circuit protection, THD<10%, P.F>0.95, IP20, CRI>80, UGR(unified Glare rating)<19, Flicker free,(flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 burning hours with, 70% of initial lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 4000K/5700K/6500K (as per ANSI Bin), SDCM(standard deviation colour matching)<3, maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard. Manufactures word mark/Name Engraved/Embossing/Screen printing on housing. Complete in all respect i/c external connection with 1.5 sqmm FRLS/HFFR PVC insulated copper conductor single core and earthing etc. as required with minimum 5 year OEM warranty. System lumen efficacy>150 lm/W output LM79& LM80 test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by engineer in charge as per requirement. (thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 degree) Power coated die cast/extruded aluminium body(thickness>1.20mm). Make- PLANO G2 SURFACE of Havells/Crompton/Bajaj or its equivalent.

Supplying installation testing & commissioning of 36 Watt recess mounted Panel light 2x2 ft. of following body material and construction as per IS: 10322 with driver as per the requirement with driver efficiency >85%, operating voltage AC 140-270 Volt, frequency 50/60 Hz, operating temp range -5 degree to 35 degree, internal surge protection of 2.5KV with short & open circuit protection, THD<10%, P.F>0.95, IP20, CRI>80, UGR(unified Glare rating)<19, Flicker free,(flicker should be below 5%), life time (LED, Driver & electrical circuitry), of minimum 50000 burning hours with, 70% of initial lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 4000K/5700K/6500K (as per ANSI Bin), SDCM(standard deviation colour matching)<3, maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard. Manufactures word mark/Name Engraved/Embossing/Screen printing on housing. Complete in all respect i/c external connection with 1.5 sqmm FRLS/HFFR PVC insulated copper conductor single core and earthing etc. as required with minimum 5 year OEM warranty. System lumen efficacy>150 lm/W output LM79& LM80 test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by engineer in charge as per requirement. (thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90 degree) Power coated die cast/extruded aluminium body(thickness>1.20mm). Make- PLANO G2/G2 POP of Havells/Crompton/Bajaj or its equivalent.

Supplying, installation, Testing & commissioning of 24W LED recessed/surface Down lighter(round/Square/Rectangular) SMD type following bidy material with PMMA and prismatic diffuser and constrcution as per IS : 10322 with driver as per the requirement with Driver effciency >85%, operating voltage AC 140-270V, Frequency 50/60Hz, operating-5 to 40 degree C, inetrnal surge protection of 2.5KV with short & open circuit protection, THD <10%, PF>0.95, IP20, CRI>80, UGR(unified Glare rating)<19, Flicker free, (flicker should be below 5%), life time of minimum 50000 burning hours with 70% of intial lumen maintained till life ends as per LM80 extrapolation IESTM-21-11 report, CCT 3000K/4000K/5700K/6500K(As per ANSI Bin),SDCM(Standard Deviaton color matching)<3, maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard. Manufactures Word Mark/Name engraved/Embossing/Screen printing on housing. complete in all respect i/c ectrenal connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with minimum 5 year OEM warranty. system efficacy>165 lm/watt output. LM79 & LM80 test report and all testing required for LED fictures as per BIS shall be submitted. shape size and CCT shall be as approved by engg-in-charge as per requirement.( thermal management: heat sink of aluminimum housing such that LED junction temp. shall not rise above 9- degree C.(Powder coated die cast/Extructed aluminium body including trim) Make-Integra NXT DL Round Surface of Havells/Crompton/Bajaj or its equivalent.

Supplying, installation, testing & commissioning of 10W LED surface mounted batten Light made of powdercoated CRCA Sheet Body, and constrcution as per IS:10322 with driver(Replaceable) as per per requirement Driver efficiency>85%%, Operating voltage AC 140-270V, frequency 50/60Hz, operating volatge range -5 degree C to 40 degree 40 degree C, internal surge protection of 2.5KV with short open circuit & protection, THD <10%, Power Factor ≥0.95, CRI >80, flicker free (flicker <5%), life time (LED, Driver & electrical circuitry), of minimum 50000 burning hours with 70% of intial Lumen maintained till life ends, CCT 3000K/ 4000K/ 5700K / 6500K (ANSI bin), SDCM <3, maximum power consumption not more than the specied rating and fixyure shall be of relevant BIS standard. Manufacturers Word mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR , PVC copper conductor single core cable and earthing etc. as required with minimum 5 year OEM warranty. System lumen efficacy>105<120 lm/watt output. LM79 & LM80 test report and all testing required for LED fixtures as per BIS shall be submitted. shape size and CCT shall be as approved by Engg in charge as requirement.(thermal management: heat sink of aluminium hosuing such that LED junction temp shall not rise above 90 degree C. Make-Luminile NXT Batten of Havells/Crompton/Bajaj or its equivalent.