Supply and Installation of 03 Nos. of 12 Mtr (150W X 6 LED Flood lights) High Mast light and 09 Nos. of 09Mtr (120 W X 6 LED Flood Lights) Mini Mast light set in various places in Malampuzha LAC, Palakkad.

Amount

Supply and install high mast Lights in various areas of Marutha Road GP & Akathethara GP - Malampuzha LAC, Palakkad District

Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 100mm top diameter, 360mm bottom diameter thickness 3mm mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 12 Meters

Installation, Testing and Commissioning of 150 W LED Flood Light luminaire supplied by SILK. Contractor should take delivery of LED Flood Lights from SILK stores. and also carryout all necessary replacement works during the warranty period of 3 years at sites

Supply and installation of Twin unit aviation LED obstruction light with stand yellow-painted die-cast aluminium alloy housing, red coloured polycarbonate dome and BC /EC lamp holders suitable for LED lamp A. Integral LED aviation obstruction light with yellow painted die-cast aluminium alloy housing, red coloured polycarbonate enclosure - 1 each B. G.I. pipes 25 mm dia Ref. LMR 1547 - 0.3 meter C. 100 x 100 x 6 mm thick G.I plate - 1 each D. Iron bolts and nuts of various sizes - 0.5 Kg E. Welding Electrode 10 Guage (Ref. MR7113) - 2 each F. 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable G. Labour charge - 1 each

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

Earthing with G.I. earth plate 300 mm X300 mm X 6 mm thick including wateringpipe of 2 metre long etc. with the earthing compound as required. A. G.I. nuts and through bolts with washer - 2 each B. Fine sand - 1 cum C. G.I Pipe 40mm dia (Ref. LMR 15490) - 2 meter D. 300 mm X 300 mm X 6 mm thick G.I.plate - 1 each E. Earthing compound - 12 Kg F. GI strip all sizes - 2.8 Kg G. Galvanised Steel Bolts & Nuts 6mm dia and 25mm long round head with slots - 4 nos H. Labour charge - 1 each

90.16.2.3 Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.32 mm dia G.I pipe ( medium class)

od245184/2021_2022 Supplying and laying 25 mm X 3 mm G.I strip at 0.50 metre below ground including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required A. GI strip all sizes - 21 Kg B. Labour charge - 1 each

90.12.1.41 Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in ground including excavation of trench of size 35 x 75 cm, refilling the trench etc. as required but excluding sand cushioning and protective covering (in ordinary soil).4 core 16 sq mm

9.1.33 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.4 X 16 sq. mm (28mm)

od245185/2021_2022 Supply of Box for Panel Board made out of Sheet Moulding Compound (560 x 280x 150 mm size) Surface mounted or recess-in wall (Indoor/Outdoor Use) One-piece moulded SMC base and SMC door with internal hinges. Knockout for wire entry, earthing bolt. A. SMC Box 560 x 280 x 150 mm size - 1 each B. 25A Contactor, Coil 240V 50/60Hz up to 500v - 1 each C. MCB 2Pole - 1 each D. 63A Connector - 2 each E. Digital timer - 2 each F. F. Banana Al. socket – 4 NO. G. 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable - 30 meter H. Labour charges - 1 each

od245186/2021_2022 Fabrication and fixing of the Panel Board Stand with 2 legs made up of B class GI<br>pipe 32mm dia 1.8mtr. length. 32 mm dia G.I pipe ( medium class) A. 32 mm dia. G.I. pipe (medium class) -3.6 M B. MS Flat (Ref. MR6004) – 2KG C. Welding Electrode 10 Guage – 6 NO.S D. MS Bolts and Nuts – 0.25 KG E. Stone aggregate (single size) 20mm nominal size -0.26 M3 F. Stone aggregate (single size) 10 mm nominal size -0.08 M3 G. Coarse sand (Zone III)- .018 M3 H. Cement -0.12 TONNE I. Grey Paint -0.10 LTR J. LABOUR CHARGES

od245187/2021_2022 Supply of Meter Box made out of Sheet Moulding Compound (430 x 265 x 170 mm size) Surface mounted or recess-in wall (Indoor/Outdoor Use) One piece<br>moulded SMC base and SMC door with internal hinges. Knockout for wire entry, earthing bolt and earthing of the meter box. A. 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable -5 mtr B. SMC Meter Box 430 x 265 x 170 mm size-1 no. C. 63 A rating, 2 pole, 100 mA RCCB- 1 no. D. 63A, HRC Fuse Base with HRC Fuse link- 1 each E. 63A, 2 Way neutral links mounted on DMC/SMC base- 1 each F. G.I Pipes 25mm dia (Ref. LMR 1547)- 1 mtr G. Earth Wire – 0.15 kg H. Iron bolts and nuts of various sizes-0.05kg I. PVC pipe 32 mm outer dia 6Kgf/cm2-4 mtr J. Earthing Compound-4 kg K. Labour charges

od245188/2021_2022 Fabrication and fixing of the Meter Box. Stand with 1 leg made up of GI pipe<br>40mm dia 2.5mtr. length. A. MS Flat -2kg B. MS Bolts and Nuts-0.25 kg C. Stone aggregate (single size) 20mm nominal size-0.268 kg D. Stone aggregate (single size) 10 mm nominal size -0.088kg E. Coarse sand -0.18 m3 F. Cement -0.128 tonne G. Grey Paint- 0.10 litre H. G.I. pipes 40 mm dia-2.5 mtr I. G.I. pipes 40 mm dia- 2 no.s J. Labour charges

charges for KSEB connection including all laison works (Actual amount paid on production of receipt

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supply and fixing of name board with angles , flats,square pipe, ACP sheet including nut and bolts, 4 no.s per mast ,2sqmm in area

Supply and install Mini mast Lights in various areas of Marutha Road GP & Akathethara GP - Malampuzha LAC, Palakkad District

Supply installation testing and commissioning of Octogaonal Pole made of hot dip galvanised GI sheet 70mm top diameter. 155mm bottom diameter thickness 3mm base plate dimensions of 250x250x16mm suitable for windspeed as per IS 875 Part III fixed head frame including round arm luminary carriage suitable to install 4/6 nos luminaries in symmetrical arrangement including connector foundation bolt 4 nos existing RCC foundation and junction box etc, complete 9 Meters

Installation, Testing and Commissioning of 120 W LED Flood Light luminaire supplied by SILK. Contractor should take delivery of LED Flood Lights from SILK stores. and also carryout all necessary replacement works during the warranty period of 3 years at site

Supply and providing heavy duty 'A' section neoprene gasket in the panel board U' section rubber beeding suitable for 1.60/ 2.00 mm sheet

Supply and fixing of 2 nos. of 25A 2 Pole AC 1 rated power contactor, 25A Connector, 2 nos. of Digital timer, Suitable Copper socket, 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, 1.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable, OBO Bettermann makes V25-B+ C/1+ NPE (switching/lightning protection) for single-phase protection. A) 25A 2 Pole AC 1 rated power contactor - 2 each B) 25A Connector - 1 each C) Digital time - 2 each D) Suitable Copper socket - 4 each E) 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable - 30m F) OBO Bettermann makes V25-B+ C/1+NPE (switching/lightning protection) for single-phase protection. - 1 each G) 1.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable - 8m H) Labour charges.

Supply and fixing HRC fuse base of 20/32A using suitable nut and bolt, 32A 2-way neutral links mounted on DMC/SMC base and 2.5 sq. mm ISI marked FRLS PVC insulated single core copper conductor cable. A) HRC fuse base of 20/32A using suitable nut and bolt - 1 each B) 32A 2-way neutral links mounted on DMC/SMC base - 1 each C) 2.5 sq. mm ISI marked, FRLS PVC insulated, single core copper conductor cable - 3m. D) Labour charges.

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Double pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, andproviding masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. (but without charcoal/ coke and salt ) as required.

Supply and clamping the following sizes of strips on surface of wall / parapet/ existing cable tray using clamps fabricated from 20 x3 mm GI flat duly painted or heavy duty GI spacer saddles, spacing of clamps not exceeding 1 m , making good the damages, colour washing etc. as required ( for vertical run).25 x 3 mm GI strip

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 10 sq mm

Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench50/38 mm or nearest size

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sq. mm (19mm)

Charges for KSEB connection including all laison works (Actual Amount paid on production of receipt).

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

Centering and shuttering including strutting, etc. and removal of form for: Foundations, footings, bases of columns, etc for mass concrete

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.

Supply and fixing of name board with angles , flats,square pipe, ACP sheet including nut and bolts, 4 no.s per mast ,2sqmm in area

Fabrication ,supply, conveyance and installation of Granite name board indicating the cost involved, the commencement, completion and inauguration date etc.

BINDU VEERAN

SANTHOSH ENGINEERING WORKS