Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.5 LAccepted-Finance | L1 | Accepted-Finance lowest | |
| 2 | L2₹5.7 L+₹28,897.45 (5.29%)Rejected-Finance R O VILL P O NAGROTA BAGWAN TEHSIL NAGROTA BAGWAN DISTT KANGRA | KANGRA | HIMACHAL PRADESH | 176001 | L2 | Rejected-Finance higher | |
| 3 | L3₹7.9 L+₹2.4 L (43.9%)Rejected-Finance NA | L3 | Rejected-Finance highest |
Tender Value
₹4.8 L
EMD Value
₹9,600
Closing Date
7 Jun 2022, 9:00 amClosed
Executive officer
M.C. Nagrota Bagwan
C/o shed near Community Bhawan (School building) ward No 06 Nagrota Bagwan
2022_UDDHP_60989_1
686-93 dated 23/05/2022
Open Tender
Civil Works
Item Wise
30 days
Nagrota Bagwan
Please refer Tender documents.
5 documents required · 5 mandatory
₹250
Executive Officer
₹9,600
Yes
20 Jul 2022
30 May 2022
9 Jun 2022
1 Jun 2022
7 Jun 2022
1 Jun 2022
Amount
civil work
Steel work welded in built up sections ,trusses and framed work, including cutting ,hoisting, fixing in position and applying a priming coat of red lead paint complete in all respect and applying a priming coat of red lead paint including all leads, lifts of material & other incidentals as directed by the engineer=in-charge.
Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, including cutting to size and shape wherever required and as directed by the Engineer in charge with all leads, lifts & other incidentals.
Providing and fixing pre-coated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self-tapping screws complete Ridges plain (500 - 600mm) as directed by the Engineer in charge with all leads, lifts & other incidentals.
Puneet Khosla
K KUMAR AND CO
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .