Construction of Toilet Block at Rythu Bazaar, Piler under AMC, Piler in Annamayya District

Earth work excavation and depositing on bank not less than one meter from the outer edges of the excavation, but shall be placed any where within 10mts.lead and 2mts. Lift as directed by the departmental officers in all soils up to excluding ordinary rock forming whenever necessary dressing the bottom of foundations to levels in all direction, well watered and thoroughly rammed before laying concrete etc., complete as per standard specification and as directed by the departmental officers.

P.C.C. (1:5:10) prop. Using 40mm HBG / HBT Machine crushed metal with screened sand including cost and conveyance of all materials to site from approved source, seignior ages charges, machine mixing, laying concrete in layers of 15cms. Thick well-compacted in position, curing for required period protecting the sides of foundation trenches whenever necessary and all incidental and operational charges and labour charges etc., complete as per standard specification referred and as per directions of the departmental officers.

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Lintel Beams

VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work including centering, shuttering. For Slab 125 m thick

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all

R.R Masonry in C.M. (1:6) using not less than 20cms. Wide hard granite stones for wall in courses not less than high set in regular courses of uniform thickness from bottom to top throughout with bond stones at every two meters apart in each course edges of the stone chisel dressed including cost and conveyance of all materials to site from approved source, seigniorage charges, well hearting the joints, curing for required period cost of labour charges for all items of works equipment and all other incidental and operational charges etc., complete as per standard specifications referred and direction of departmental officers

Masonry for panel walls in superstructure with CM (1:6) prop: (cement : sand) using Fly ash lime solid blocks of size 290mm X 225mm X 140mm and having minimum crushing strength of 50 Kg/Sqcm and using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust for manufacturing of Fly ash lime solid blocks including cost and conveyance of all materials like cement, sand, fly ash solid blocks, water etc., to site, including sales & other taxes on all materials and such as labour charges, like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., complete for finished item of work. (APSS No. 501 & 504). For Super Strecture

Supply and fixing of 0.75 x 0.45 m x 25mm thick RCC cement Jalies, including cost and conveyance of all materials and all labour chargest etc., complete to site and including all operational and incidental and labour charges for for fixing in position etc., complete for finished item of work (BMS-W.15)

Plastering 20mm thick in CM (1:5) including cost and conveyance of all materials like cement, sand, water etc., to site, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar,scaffolding charges, lift charges, finishing,including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etc., complete for Uneven Surfaces of Brick Wall for finished item of work. (APSS 901,903 & 904)

Plastering 12mm thick in CM(1:5) including cost and conveyance of all materials like cement, sand (screened), water etc., to site, including sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903)

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats

Painting with best synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat total 3 coats including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers. For New Iron Work

Dadooing with decorated white back ground glazed tiles, set over base coat of cement mortar (1:6), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials

Flooring with full Ceramic Tile using 300mm x 300mm 7 to 8 mm thick tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Fabrication, Supply and fixing of M.S. Square purlins of size 50mm x 50mm Medium class of 3.00 mm thick with welding old clamps, bolts sides of the pipe in position with necessary bolts, nuts, washers including cost of pipe, welding, cutting and loading, unloading charges etc., complete for finished item of work as directed by the departmental officers.

Roofing With 0.5mm thick galvanized /pre painted G.I profiled sheets with crimp of 200mm length fixed to the purlins With 14 size self drilling with neoprene washer Side laps are stiched with self tapping drilling screws .End laps are to be sealed with 25x3 mm Butyl tape .the sheets are provided with anti capillary groove.including cost and labour charges etc., complete as per standard specification for finished item of work.

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and fixing of door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mm x 200mm with the wall thickness of 1.0mm +/- 0.1mm equally divided into 4 no's with tongue and groove locking arrangements. The shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm +/-0.15mm section mitre-cut and joined at 4 corner with 125mm x 225mm plastic brackets. the shutter shall be horizontally reinforeced with 2 no's of 8mm PVC rods. Teak wood batons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed onto the door shutter(BMT-N.45)

Supply and fixing of door frame made of hollow extruded PVC section having dimesions of 40 x 57mm with the wall thickness of 2mm +/- 0.20mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metri-cut/welded. PVC DOOR FRAME(BMT-N.46)

Supplying and fixing Orissa Pan white glazed W.C. 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap 580 mm x 440 mm (BMW-D.04)

Supply and fixing Indian make Flat Back Wash Hand Basin with Pedastal (HSW/Parryware/Neycer) 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 min nomianl size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 Standard brackets including wooden block: 630 X 450 mm Double C.P. Pillar cock

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 22.20mm OD CPVC Pipe - SDR 13.5

Supply and Fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water (IS 15778:2007). For 28.60mm OD CPVC Pipe - SDR 13.5

Supply and Fixing of 110mm dia PVC Pipe 4kg/cm2, including cost and coveyance of all materials and all labour charges etc., complete.

Supply and Fixing of 12.7 mm dia NP Pillar cock heavy duty 1st quality Indian make, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-28)

Supply and Fixing of 12.7 mm dia NP Push cock 1st quality, including cost and coveyance of all materials and all labour charges etc., complete.(BMW-E-29)

Providing and placing on terrace (at all floors levels) polyethylene syntex water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials, labour charges etc., complete as per Standard Specifications and as directed by the

Supply and fixing G.I. Union 25.4 mm of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-03)

Supply and fixing G.I. Union 31.75 mm of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-04)

Supply and fixing 25.4 copper ball cock ith PVC ball Indian make ISI mark, including cost and conveyance of materials, labour charges etc., complete. (BMW-F-11)

Supply and fixing 38.1 C.P waste coupling Half or Full Thread 1st quality Indian make Parryware or equivalent, including cost and conveyance of materials, labour charges etc., complete. (BMW-E-31)

Supply and fixing of PVC low level system with internal components & short bend:10 Liters capacity Single Flush, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-08)

Supply and fixing of 38.1 mm dial PVC Solid waste pipe outlet, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-06)

Supply and fixing of 75mm dia 3 M Doible socket PVC/ SWR pipe 4 Kg/Sq.cm, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-14)

Supply and fixing of 75mm dia - 45 Degree Bend - UPVC / SWR pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-61)

Supply and fixing of Round Jali UPVC / SWR Pipe fittings, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-121)

Supply and fixing of 31.75mm dia PVC flexible waste pipe of 914.4mm length of 1st quality, including cost and conveyance of materials, labour charges etc., complete. (BMW-G-05)

Constructing 457.2 mm x 457.2 mm (1'6" x 1'6") brick in CM 1:6 prop. Masonry Inspection chamber upto 914.4mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6" x 1'6") C.I. Frame andcover of 20Kg., including cost and conveyance of materials, labour charges etc., complete. (BMW-B-06)

Supply and fixing in position M.Spipe square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in including cost and conveyance of all materials, labour charges for fabricating and fixing of steel works like Window Grills, Compound Wall Grills, Iron Doors, Windows including cost of welding rods, power chargesand all other incidental and operational charges etc., complete

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) outside in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone wooden deep box incluidng all labour charges etc., complete make:sudhakar/modi.ISI as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Supply and fixing of 20W LED Tube light luminaire (on existing light point connection) including all labour charges etc., complete

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Providing independent earthling by excavating a trench to a depth of 1.50 M in all soils, as per size specified in the Data, using 20mm dia GI pipe of 1.20 Mtrs length and 2.50 sqmm copper wire 3.00 mts with necessary accessories with hume pipe ring duly providing staggered holes with hard coke and salt layers. As per Standard data 5.1.1