Nagar Panchayat Risia Me Washroom Ka Nirman Karya.

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge DSR-2.6.1

Supplying and filling in plinth with sand under floors, including watering. ramming, consolidating and dressing complete, DSR 2.27

1:5:10 (1 cement: 5 coarse sand (zone-llll) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) DSR 4:1:10

Brick work with common burnt clay FPS(non modular)bricks of class designation 7.5 in foundation and plinth in 1:6 (1 cement: 6 coarse sand) dsr 6.1.2

Brick work with common burnt clay F.P.S(non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and size in 1:6 (1 cement 6 coarse sand) dsr 6.4.2

Centering and shuttering including strutting. propping etc. and removal of form for dsr 5.9.1

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement: 1.5 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 5.3

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Hot rolled deformed bars dsr 5.22A.4

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20mm nominal dia Rings DSR 18.8.2

12 mm thick Plaster 1:6 Cement & Fine Sand dsr 13.1.2

Finishing walls with water proofing cement paint of required.shade dsr 13.44.1

Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces. DSR: 10.5.1

Providing and Laying vitrified floor tiles in different size(thickness to be specified by the manufacturer) with 20 mm thick cement mortar 1:4 cement and c sand including aroutina the joints etc complete.dsr 11:41:2

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. DSR:8.31

Cisten with fittings for wateriss Urinal each dsr 7075

P/L water tank dsr 18.50.1

P/L cpvc pipe 15 mm dia dsr 18.8.1

P/L led board 3x.45m as per market rate

S/F of Sigh Board and Photographe

Please Enable Macros to View BoQ information